0
  • No products in the cart.
Total:€0.00

800G-OSFP800-500

800G-OSFP800-500
800G-OSFP800-500
800G-OSFP800-500
800G-OSFP800-500

MSA Compatible 800G-OSFP800-500 OSFP Module

OSFP800 800G DR8 Module (Tx/Rx: 1304.5-1317.5nm, 106.25Gbps (PAM4) per lane, up to 850 Gbps, Max. 500m over SMF, 3 dB, Temp. 0-70C, MPO-16 Connector)

€848.35

SKU: 800G-OSFP800-500-MS
5 - Years Warranty
Risk Free Return Policy
Reliable Testing Program
Shipping:Below 1 Week in EU Countries

Similar products:

Key Technical Data
Media Type:

Single-Mode Fibre (SMF)
Connectors:

MPO-16
TX Wavelength:

1310 nm
RX Wavelength:

1310 nm
Minimum Optical Budget:

3 dB
Maximum Distance:

500m
Supported Data Rate:

850Gbps
Supported Applications:

800G Ethernet
DDM/DOM:

Supported
Forward Error Correction (FEC):

Host FEC Supported
Transmitter Type:

DFB Laser
Tx Wavelength Bandwidth:

13nm
Average Launch Power (Min) Each Lane:

-2.9 dBm
Average Launch Power (Max) Each Lane:

4 dBm
Extinction Ratio (Min):

3.5 dB
Receiver Type:

PIN photodiode
Rx Wavelength Bandwidth:

13 nm
Average Receiver Sensitivity (Min) Each Lane:

-5.9 dBm
Average Receiver Sensitivity (Max) Each Lane:

4 dBm
Receiver Overload:

5 dBm
Temperature Range:

Standard 0°-70°C
Storage Temperature:

-40° to 85°C
Relative Humidity:

5 to 95%
Power Consumption:

≤ 15W
Power:

+3.3V
Compliance:

IEEE 802.3cu, CMIS Rev 5.1, IEE802.3ck, OSFP MSA, RoHS
Product Documentation

800G-OSFP800-500 is an 800G OSFP transceiver module, compatible with Multi-Vendor MSA standards, designed for operation over dual single-mode fiber (SMF). The module supports an 800G electrical host interface and an optical line interface using DFB laser transmitters and PIN receivers, enabling up to 500m reach over SMF with host FEC enabled. On the transmission side, the module converts 8×106.25Gbps PAM4 electrical input lanes into optical signals. 800G-OSFP800-500 provides a total optical budget of 3 dB, average launch power per lane from –2.9 dBm to +4 dBm, and receiver sensitivity down to –5.9 dBm. It supports Digital Diagnostic Monitoring (DDM/DOM), it operates over a 0°C to 70°C case temperature range and has Duplex MPO-16 interface. 800G-OSFP800-500 is compliant with IEE802.3ck, IEEE 802.3cu, OSFP MSA, CMIS Rev 5.1 standards.
The transceiver is RoHS compliant and designed for use in 800G Ethernet applications.

Related Products