800G-OSFP800L-100

MSA Compatible 800G-OSFP800L-100 OSFP Module

OSFP800 800G SR8 Linear Pluggable Optical Module (Tx/Rx 850/850nm, 8×106.25Gbps (PAM4) per lane, up to 850Gbps, Max. 50m (with Host FEC) over MMF, 1.8 dB, Temp. 0-70C, MPO-16 Connector)

504.50

SKU: 800G-OSFP800L-100-MS
Shipping:Below 1 Week in EU Countries

Similar products:

Key Technical Data
Media Type:

Multi-Mode Fiber (MMF)

Connectors:

MPO-16

TX Wavelength:

850nm

RX Wavelength:

850nm

Minimum Optical Budget:

1.8 dB

Maximum Distance:

50m

Supported Data Rate:

850Gbps

Supported Applications:

800G Ethernet, Data centers and Cloud Networks

DDM/DOM:

Supported

Forward Error Correction (FEC):

Host FEC Supported

Transmitter Type:

VCSEL Laser

Tx Wavelength Bandwidth:

20 nm

Average Launch Power (Min) Each Lane:

-4.6 dBm

Average Launch Power (Max) Each Lane:

4 dBm

Extinction Ratio (Min):

3 dB

Receiver Type:

PIN photodiode

Rx Wavelength Bandwidth:

20 nm

Average Receiver Sensitivity (Min) Each Lane:

-6.4 dBm

Average Receiver Sensitivity (Max) Each Lane:

4 dBm

Receiver Overload:

4 dBm

Temperature Range:

Standard 0°-70°C

Storage Temperature:

-40° to 85°C

Relative Humidity:

5 to 95%

Power Consumption:

≤ 5.5W

Power:

+3.3V

Compliance:

CMIS 4.0, IEEE P802.3db, OSFP MSA 5.0, RoHS 2.0

800G-OSFP800L-100-MSA Compatible 800G OSFP800 SR8 Linear Pluggable Optical Module. 800G-OSFP800L-100 is an 800G OSFP transceiver module, compatible with Multi-Vendor MSA standards, and designed for short-reach optical interconnects over multi-mode fiber (MMF). The module supports an 800G electrical host interface and provides an optical interface using 850nm VCSEL transmitters and PIN photodiode receivers. On the transmission side, the module converts 8×106.25Gbps PAM4 electrical input channels into optical signals across wavelengths from 840nm to 870nm, enabling up to 50 meters reach over OM4 MMF with MPO-16 APC connectors. 800G-OSFP800L-100 provides an optical budget of 1.8 dB, with transmitter average launch power from –4.6 dBm to +4 dBm, and receiver sensitivity down to –6.4 dBm. The module supports Digital Diagnostic Monitoring (DDM/DOM) and operates over a 0°C to 70°C case temperature range. The module is RoHS 2.0 compliant and meets IEEE P802.3db, CMIS 4.0, and OSFP MSA 5.0 standards and is supported for 800G Ethernet

Related Products