800G-OSFP800L-500

MSA Compatible 800G-OSFP800L-500 OSFP Module

OSFP800 800G DR8 Linear Pluggable Optical (LPO) Module (Tx/Rx: 1304.5-1317.5nm, 106.25Gbps (PAM4) per lane, up to 850 Gbps, Max. 500m over SMF, 3 dB, Temp. 0-70C, MPO-16 Connector)

837.84

SKU: 800G-OSFP800L-500-MS
Shipping:Below 1 Week in EU Countries

Similar products:

Key Technical Data
Media Type:

Single-Mode Fibre (SMF)

Connectors:

MPO-16

TX Wavelength:

1271 nm, 1291 nm, 1311 nm, 1331nm

RX Wavelength:

1271nm, 1291nm, 1311nm, 1331 nm

Minimum Optical Budget:

3 dB

Maximum Distance:

500m

Supported Data Rate:

850Gbps

Supported Applications:

800G Ethernet

DDM/DOM:

Supported

Forward Error Correction (FEC):

Host FEC Supported

Transmitter Type:

DFB Laser

Tx Wavelength Bandwidth:

13 nm

Average Launch Power (Min) Each Lane:

-2.9 dBm

Average Launch Power (Max) Each Lane:

4 dBm

Extinction Ratio (Min):

3.5 dB

Receiver Type:

PD photodiode

Rx Wavelength Bandwidth:

13 nm

Average Receiver Sensitivity (Min) Each Lane:

-5.9 dBm

Average Receiver Sensitivity (Max) Each Lane:

4 dBm

Receiver Overload:

5 dBm

Temperature Range:

Standard 0°-70°C

Storage Temperature:

-40° to 85°C

Relative Humidity:

10 to 90%

Power Consumption:

≤10W

Power:

+3.3V

Compliance:

IEEE 802.3bs, CMIS Rev 5.1, RoHS

800G-OSFP800L-500-MSA Compatible 800G OSFP800 SR8 Linear Pluggable Optical Module. 800G-OSFP800L-500 is an 800G OSFP transceiver module, compatible with Multi-Vendor MSA standards, and designed for short-reach optical interconnects over single-mode fiber (SMF). The module supports an 800G electrical host interface and provides an optical interface using DFB transmitters and PD photodiode receivers. On the transmission side, the module converts 8×106.25Gbps PAM4 electrical input channels into optical signals across wavelengths from 1304.5nm to 1317.5nm, enabling up to 500 meters reach over single-mode fibre (SMF) with MPO-16 APC connectors. 800G-OSFP800L-500 provides an optical budget of 3 dB, with transmitter average launch power from –2.9 dBm to +4 dBm, and receiver sensitivity down to –5.9 dBm. The module supports Digital Diagnostic Monitoring (DDM/DOM) and operates over a 0°C to 70°C case temperature range. The module is RoHS compliant and meets IEEE 802.3db standards and is supported for 800G Ethernet.

Related Products