QDD-400G-SR8

QDD-400G-SR8 Arista Compatible 400G QSFP-DD 100M Transceiver

# Key Highlights
  • Type: 400GBASE-SR8 QSFP-DD
  • Compatibility: Arista Compatible
  • Tx/Rx Wavelength: 850nm
  • Laser: VSCEL
  • Modulation: PAM4
  • Fiber Type: Multi-Mode Fiber (MMF)
  • Connectors: MTP/MPO-16
  • Optical Budget: 1.9dB
  • Max. Distance: 100m over OM5
  • Data Rate: 425 Gbps
  • FEC Forward Error Correction: Supported
  • DDM/DOM: Supported
  • Power Consumption: ≤ 10W
  • Temperature: Standard 0° – 70°C
# Pricing & Ordering
SKU: 400G-QSFP-DD-100-AR

495.50

Standard recommended retail price without VAT.

Lead Time: Below 1 Week in EU Countries
# Quality Assurance

Because of our comprehensive Testing Program, we are confident on quality of our products. Such approach empower us to cover all our products with:

# Key Technical Data
Media Type:

Connectors:

TX Wavelength:

RX Wavelength:

Minimum Optical Budget:

Maximum Distance:

Supported Data Rate:

Supported Applications:

DDM/DOM:

CDR (Clock and Data Recovery) chip

Forward Error Correction (FEC):

Transmitter Type:

Tx Wavelength Bandwidth:

Average Launch Power (Min) Each Lane:

Average Launch Power (Max) Each Lane:

Extinction Ratio (Min):

Receiver Type:

Rx Wavelength Bandwidth:

Average Receiver Sensitivity (Min) Each Lane:

Average Receiver Sensitivity (Max) Each Lane:

Receiver Overload:

Temperature Range:

Storage Temperature:

Relative Humidity:

Power Consumption:

Power:

Chipset:

Compliance:

, , , , ,

# Product Documentation
Multi-Vendor MSA Compatible 400G-QSFP-DD-100 Datasheet

Arista Compatible QDD-400G-SR8 QSFP-DD Module is based on our product 400G-QSFP-DD-100. When You will order it will be encoded to be compatible with Arista equipment and it will be labeled with part number: 400G-QSFP-DD-100-AR, where AR means Arista Compatible. Above You can download data-sheet of our 400G-QSFP-DD-100 product.

# Product Description

Our Compatible Arista QDD-400G-SR8 QSFP-DD transceiver is based on our 400G-QSFP-DD-100 product, which has the same parameters and is manufactured in accordance with the same industry standards as its OEM counterpart. Our compatible module version is designed for operation over a Double Fiber Multi-Mode Fiber (MMF) optical cable. It has a minimum guaranteed optical budget of 1.9 dB, which typically is enough to reach about 100m over OM5. However, distance is only an indicative parameter calculated for identification comfort. Finally, we calculate distance while keeping in mind the minimum (guaranteed) optical budget and the average attenuation of optical cabling in the industry. Our Arista QDD-400G-SR8 compatible transceiver uses a high-quality VSCEL Laser transmitter operating at 850 nm nominal wavelength and a 850 nm PIN Photodiode receiver. This module supports DDM/DOM optical diagnostics and provides diagnostic data about the current operating conditions. This compatible module has a MTP/MPO-16 connector and module is designed for operation in standard temperature networking environments ranging from 0°-70°C. The transceiver chipset supports data rates ranging from 425 Gbps and such applications as 400G Ethernet (412.5Gbps). It is important to note that the mentioned application support will vary depending on the port where the module will be used, and it supported applications as well as module speed configuration during ordering process, but we can ensure that our module will support at least the same functionality as its OEM counterpart. This is a multi-purpose transceiver that can be used in a variety of different places in today’s networking. As a result, Internet Service Provider (ISP) Aggregation and Backbone, Mobile Operator Core Networks and Data Center Core Network interconnections are the most popular applications for this product.

Our compatible Arista QDD-400G-SR8 module is CE/RoHS certified, it meets product safety standards, and is compliant with QSFP-DD Multi Source Agreement (MSA) QSFP-DD MSA industry standard. To ensure smooth operation, we have completed compatibility tests for this module with the most recent platforms of Arista networking equipment, allowing us to encode transceiver EEPROM memory to be compatible with and work seamlessly in Arista platforms. We are committed to quality, therefore before delivering our products, we conduct stringent quality inspections that include optical parameter measurements, connector cleanliness tests, and EEPROM memory data validation tests. If you have any questions, please Contact us. We will gladly learn about your needs and recommend the best compatible products from our portfolio.

preloader