Standard recommended retail price without VAT.
€0.00
Standard recommended retail price without VAT.
Because of our comprehensive Testing Program, we are confident on quality of our products. Such approach empower us to cover all our products with:
Media Type: | Single-Mode Fiber (SMF) |
---|---|
TX Wavelength: | 1310 nm. |
RX Wavelength: | 1310 nm. |
Minimum Optical Budget: | 14.2 dB |
Maximum Distance: | 40km |
Supported Data Rate: | 103.125 to 112.2 Gbps |
Supported Applications: | 100G Ethernet (103.125Gbps), OTU4 (112Gbps) |
DDM/DOM: | Support |
Temperature Range: | Standard 0°-70°C |
Connectors: | Double LC |
Tx Wavelength Bandwidth: | 4 WDM Seperated 1310 nm Lanes (15.66 nm 1294.53 – 1310.19nm) (L0 Tx center 1295.56nm, L1 Tx center 1300.05nm, L2 Tx center 1304.58nm, L3 Tx center 1309.14nm) |
Rx Wavelength Bandwidth: | 4 WDM Seperated 1310 nm Lanes (15.66 nm 1294.53 – 1310.19nm) (L0 Tx center 1295.56nm, L1 Tx center 1300.05nm, L2 Tx center 1304.58nm, L3 Tx center 1309.14nm) |
Minimum Transmitting Power: | -0.7 dB |
Maximum Transmitting Power: | 6.5 dB |
Receiver Sensitivity: | -14.85 dB |
Receiver Overload: | – 4.9 dB |
Transmitter Type: | EML Laser |
Receiver Type: | PIN photodiode |
Power: | +3.3V single power supply |
Compliance: | 100GBASE-ER4, CE, CFP4 MSA, Class 1 FDA and IEC60825-1 Laser Safety Compliant, IEEE 802.3ba, RoHS |
100G-CFP4-40 is Multi-Vendor MSA Compatible CFP4 (C = 100 in Roman numerals; Centum F = Form Factor; P = Pluggable; 4th generation) optical transceiver, designed to support 100G Ethernet (100GBASE-ER4) and 112G OTN according ITU-T G.959.1 ap¬plications using four parallel LAN WDM separated data lanes on each direction . 100G-CFP4-40 operating over two-fiber Single-Mode Fiber (SMF) optical cable. It has minimum guaranteed optical budget of 14.2 dB, with in most cases is enough to reach about 40 km distance, however, distance is just indicative parameter calculated for comfort of identification. If host equipment doesn’t require FEC functionality 100G-CFP4-40 can reach 40km distance, in case FEC is required we can guarantee link up to 30km. Eventually we calculate distance taking in account minimal optical budget and average attenuation of optical cabling in industry. For each di¬rection, this transceiver use 4xEML laser transmitters operating at 1310 band separated by wavelengths (1295.56, 1300.05, 1304.58, 1309.14nm) and 4 x PIN photodiode receivers for each data lane. It support DDM/DOM optical diagnostics, with provide diagnostic information about the present operating conditions. 100G-CFP4-40 operates in Standard 0°-70°C temperature range and has Double LC interface. CFP4 ER4 100G transceiver support 103.1 Gbps – 112 Gbps data rate and such applications as 100G Base ER4 for LAN and 112G OTU-4 for OTN WAN. Most popular applications for CFP4 LR4 100G is LAN Ethernet connections for Datacom and optical transport networking (OTN).
CFP4 ER4 100G Transceiver is CE/RoHS certified and it is Compliant with relevant product safety standards. 100G-CFP4-40 is fully compliant to CFP MSA CFP4 Hardware Specification, Revision 0.2. Consequently, it means that module is compatible with 80% of networking equipment, where is not implemented a special algorithm for protection against third party modules. However – we can provide CFP4 transceiver with custom-encoded firmware in order to make it work almost in any equipment supporting CFP4 form-factor. Therefore, we will be glad to know what your requirement is. Because our focus is providing top quality service, we are performing serious quality checks before delivery of our products. As a result, we do optical parameter measurements, connector cleanness tests and EEPROM memory data validation tests.