Standard recommended retail price without VAT.
MA-CBL-100G-3M
MA-CBL-100G-3M Cisco Compatible 100G 3M MMF QSFP28 PDAC
# Key Highlights
- Type: 100G Passive Twinax Cable
- Compatibility: Cisco Meraki Compatible
- Media Type: Passive Copper Cable
- Max. Distance: 3 m
- Data Rate: 96.97-112.2 Gbps
- Temperature: Standard 0°-70°C
- Low Power Consumption: 1.5W (Typical)
# Pricing & Ordering
SKU: 100G-PDAC-QSFP-3-CI
€35.77
Lead Time: Below 1 Week in EU Countries
# Quality Assurance
Because of our comprehensive Testing Program, we are confident on quality of our products. Such approach empower us to cover all our products with:
# Key Technical Data
| Media Type: | |
|---|---|
| DAC Copper Type: | |
| Maximum Distance: | |
| Supported Data Rate: | |
| Supported Applications: | |
| DDM/DOM: | |
| Temperature Range: | |
| Connectors: | |
| Power: | |
| Power Consumption: | |
| MTBF: | |
| Compliance: | CE, IEEE 802.3ba, QDR InfiniBand, QSFP28 MSA, RoHS, SFF-8436, SFF-8665 |
# Product Documentation
Multi-Vendor MSA Compatible 100G Passive Twinax Cable 100G-PDAC-QSFP Datasheet
Cisco Meraki Compatible MA-CBL-100G-3M cable is based on our product 100G-PDAC-QSFP. When You will order it will be encoded with Cisco code and it will be labeled with part number: 100G-PDAC-QSFP-CI, where CI means Cisco Compatible. Above You can download datasheet of our 100G-PDAC-QSFP product.
# Product Description
MA-CBL-100G-3M is Cisco Meraki Compatible 100G Passive Twinax Cable, operating over passive copper cable. 100G Passive twinax cable is equipped with Cisco Meraki compatible QSFP28 transceiver assembly at the each end of cable. As the passive Twinax cables do not support any electrical transmission signal boosting or regeneration, length of this 100G Passive Twinax cable is 3 meters, which is enough to support 100G connections within same or neighboring equipment racks. 100G Passive Twinax cable supports 4 separate fully duplex copper data lanes, which support 96.97-112.2 Gbps multi-rate communication and such applications as 100G Ethernet (100.125Gbps). Most popular applications of MA-CBL-100G-3M 100G Passive Twinax Cables are cost effective close range interconnections within equipment room of telecom operators or data centers, interconnecting LAN or SAN applications with speeds up to 100G. Switch high speed stacking is as well one of the application examples for this 100G cable. The Cisco Meraki MA-CBL-100G-3M passive twinax cable is compatible with the Cisco Meraki MS355 and MS450 switches.
MA-CBL-100G-3M Passive Twinax Cable is CE/RoHS certified and it is fully compliant with the product safety standards. MA-CBL-100G-3M is as well fully compliant to QSFP28 Multi Source Agreement SFF-8665. We at Edge Optics run compatibility tests on the Cisco compatible MA-CBL-100G-3M passive twinax cables using the newest Cisco networking platforms, allowing us to encode the transceiver’s EEPROM memory to be fully compatible and work seamlessly with Cisco system equipment. MA-CBL-100G-3M passive twinax cables, on the other hand, comply with the Multi Source Agreement and the SFF-8665 industry standard. Because our priority is to provide excellent service, we do thorough quality inspections on all of our products before to delivery. As a result, we perform optical parameter measurements, connector cleanness testing, and EEPROM memory data validation tests on QSFP transceivers. Please contact us so that we can learn more about your requirements.
