FTLC1122RDNL

FTLC1122RDNL Finisar Compatible 10km 100GBASE-LR4 CFP2 Optical Transceiver Module

# Key Highlights
  • Type: CFP2 (C (centum) Form Factor Pluggable)
  • Compatibility: Finisar compatible
  • Tx Wavelength: 1310 nm.
  • Rx Wavelength: 1310 nm.
  • Media Type: Double Fiber Single-Mode Fiber (SMF.)
  • Optical Budget: 6.3 dB
  • Max. Distance: 10km
  • Data Rate: 103.1 to 112 Gbps
  • Temperature: Commercial 0°-75°C
# Pricing & Ordering
SKU: 100G-CFP2-10-FI

945.95

Standard recommended retail price without VAT.

Lead Time: Below 1 Week in EU Countries
# Quality Assurance

Because of our comprehensive Testing Program, we are confident on quality of our products. Such approach empower us to cover all our products with:

# Key Technical Data
Media Type:

Double Fiber Single-Mode Fiber (SMF.)

TX Wavelength:

1310 nm.

RX Wavelength:

1310 nm.

Minimum Optical Budget:

6.3 dB

Maximum Distance:

10km

Supported Data Rate:

103.125 to 112.2 Gbps

Supported Applications:

100G Ethernet (103.125Gbps), OTU4 (112Gbps)

DDM/DOM:

Supported

Temperature Range:

Commercial 0°C to 75°C

Connectors:

Double LC

Tx Wavelength Bandwidth:

4 WDM Seperated 1310 nm Lanes (15.66 nm 1294.53 – 1310.19nm) (L0 Tx center 1295.56nm, L1 Tx center 1300.05nm, L2 Tx center 1304.58nm, L3 Tx center 1309.14nm)

Rx Wavelength Bandwidth:

4WDM Seperated 1310 nm Lanes (15.66 nm 1294.53 – 1310.19nm) (L0 Tx center 1295.56nm, L1 Tx center 1300.05nm, L2 Tx center 1304.58nm, L3 Tx center 1309.14nm)

Minimum Transmitting Power:

Each Lane -4.3 dBm

Maximum Transmitting Power:

Each Lane 4.5 dBm

Receiver Sensitivity:

Each Lane -10.6 dBm

Receiver Overload:

Each Lane 4.5 dBm

Transmitter Type:

EML Laser

Receiver Type:

PIN photodiode

Power:

+3.3V single power supply

Chipset:

MAXIM, MINDSPEED, SEMTECH, UX

Compliance:

100GBASE-LR4, CE, CFP2 MSA,, Class 1 FDA and IEC60825-1 Laser Safety Compliant, IEEE 802.3ba, RoHS, SFF-8431

# Product Documentation
Multi-Vendor MSA Compatible 100G-CFP2-10 CFP2 Datasheet

Finisar Compatible FTLC1122RDNL CFP2 Module is based on our product 100G-CFP2-10. When You will order it will be encoded with Finisar code and it will be labeled with part number: 100G-CFP2-10-FI, where FI means Finisar Compatible. Above You can download datasheet of our 100G-CFP2-10 product.

# Product Description

FTLC1122RDNL Finisar Compatible CFP2 transceiver is based on our 100G-CFP2-10 product, which has the same parameters and is manufactured in accordance with the same industry standards as its OEM counterpart. Our compatible module version is designed for operation over a Double Fiber Single-Mode Fiber (SMF) optical cable. It has a minimum guaranteed optical budget of 6.3 dB, which typically is enough to reach about 10 km. However, distance is only an indicative parameter calculated for identification comfort. Finally, we calculate distance while keeping in mind the minimum (guaranteed) optical budget and the average attenuation of optical cabling in the industry. Our Finisar FTLC1122RDNL compatible transceiver uses a high-quality DFB Laser transmitter operating at 1295.56, 1300.05, 1304.58, 1309.14 nm nominal wavelength and a 1295.56, 1300.05, 1304.58, 1309.14 nm PIN Photodiode receiver. This module supports DDM/DOM optical diagnostics and provides diagnostic data about the current operating conditions. This compatible module has a Double LC connector and module is designed for operation in commercial temperature networking environments ranging from 0°-75°C. The transceiver chipset supports data rates ranging from 103.125-112 Gbps and such applications as 100G Ethernet (103.125Gbps), OTU4 4l1-9D1F (112 Gbps). It is important to note that the mentioned application support will vary depending on the port where the module will be used, and it supported applications as well as module speed configuration during ordering process, but we can ensure that our module will support at least the same functionality as its OEM counterpart. This is a multi-purpose transceiver that can be used in a variety of different places in today’s networking. As a result, Internet Service Provider (ISP) Aggregation and Backbone, Mobile Operator Core Networks and Data Center Core Network interconnections are the most popular applications for this product.

Our compatible Finisar FTLC1122RDNL module is CE/RoHS certified, it meets product safety standards, and is compliant with CFP Multi Source Agreement (MSA) CFP-MSA industry standard. To ensure smooth operation, we have completed compatibility tests for this module with the most recent platforms of Finisar networking equipment, allowing us to encode transceiver EEPROM memory to be compatible with and work seamlessly in Finisar platforms. We are committed to quality, therefore before delivering our products, we conduct stringent quality inspections that include optical parameter measurements, connector cleanliness tests, and EEPROM memory data validation tests. If you have any questions, please Contact us. We will gladly learn about your needs and recommend the best compatible products from our portfolio.