Standard recommended retail price without VAT.
100G-CFP4-10
Multi-Vendor MSA Compatible 100G-CFP4-10 CFP4 Module (CFP4 100GBASE-LR4)
# Key Highlights
- Type:CFP4
- Compatibility:Multi-Vendor MSA Compatible
- Tx/Rx Wavelength: 1310 nm (LAN WDM)
- Media Type: Double Fiber Single-Mode Fiber (SMF.)
- Optical Budget: 6.3 dB
- Max. Distance: 10 km
- Data Rate: 103.1 to 112 Gbps
- Temperature:Standard 0°-70°C
# Pricing & Ordering
SKU: 100G-CFP4-10
€1,126.13
Lead Time: Below 1 Week in EU Countries
# Quality Assurance
Because of our comprehensive Testing Program, we are confident on quality of our products. Such approach empower us to cover all our products with:
# Key Technical Data
| Media Type: | Single-Mode Fiber (SMF) |
|---|---|
| TX Wavelength: | 1310 nm. |
| RX Wavelength: | 1310 nm. |
| Minimum Optical Budget: | 6.3 dB |
| Maximum Distance: | 10km |
| Supported Data Rate: | 103.125 to 112.2 Gbps |
| Supported Applications: | 100G Ethernet (103.125Gbps), OTU4 (112Gbps) |
| DDM/DOM: | Support |
| Temperature Range: | Standard 0°-70°C |
| Connectors: | Double LC |
| Tx Wavelength Bandwidth: | 4 WDM Seperated 1310 nm Lanes (15.66 nm 1294.53 – 1310.19nm) (L0 Tx center 1295.56nm, L1 Tx center 1300.05nm, L2 Tx center 1304.58nm, L3 Tx center 1309.14nm) |
| Rx Wavelength Bandwidth: | 4 WDM Seperated 1310 nm Lanes (15.66 nm 1294.53 – 1310.19nm) (L0 Tx center 1295.56nm, L1 Tx center 1300.05nm, L2 Tx center 1304.58nm, L3 Tx center 1309.14nm) |
| Minimum Transmitting Power: | Each Lane -4.3 dBm |
| Maximum Transmitting Power: | Each Lane 4.5 dBm |
| Receiver Sensitivity: | Each Lane -10.6 dBm |
| Receiver Overload: | Each Lane 4.5 dBm |
| Transmitter Type: | EML Laser |
| Receiver Type: | PIN photodiode |
| Power: | +3.3V single power supply |
| Compliance: | 100GBASE-LR4, CE, CFP4 MSA, Class 1 FDA and IEC60825-1 Laser Safety Compliant, IEEE 802.3ba, RoHS |
# Product Documentation
# Product Description
100G-CFP4-10 is Multi-Vendor MSA Compatible CFP4 (C = 100 in Roman numerals; Centum F = Form Factor; P = Pluggable; 4th generation) optical transceiver, designed to support 100G Ethernet (100GBASE-LR4) and 112G OTN according ITU-T G.959.1 applications using four parallel LAN WDM separated data lanes on each direction . 100G-CFP4-10 operating over two-fiber Single-Mode Fiber (SMF) optical cable. It has minimum guaranteed optical budget of 6.3 dB, with in most cases is enough to reach about 10 km distance, however, distance is just indicative parameter calculated for comfort of identification. Eventually we calculate distance taking in account minimal optical budget and average attenuation of optical cabling in industry. For each direction this transceiver use 4xEML laser transmitters operating at 1310 band separated by wavelengths (1295.56, 1300.05, 1304.58, 1309.14nm) and 4 x PIN photodiode receivers for each data lane. It support DDM/DOM optical diagnostics, with provide diagnostic information about the present operating conditions. 100G-CFP4-10 operates in Standard 0°-70°C temperature range and has Double LC interface. CFP4 LR4 100G transceiver support 103.1 Gbps – 112 Gbps data rate and such applications as 100G Base LR4 for LAN and 112G OTU-4 for OTN WAN. Most popular applications for CFP4 LR4 100G is LAN Ethernet connections for Datacom and optical transport networking (OTN).
CFP4 LR4 100G Transceiver is CE/RoHS certified and it is Compliant with relevant product safety standards. 100G-CFP4-10 is fully compliant to CFP MSA CFP4 Hardware Specification, Revision 0.2. Consequently, it means that module is compatible with 80% of networking equipment, where is not implemented a special algorithm for protection against third party modules. However – we can provide CFP4 transceiver with custom-encoded firmware in order to make it work almost in any equipment supporting CFP4 form-factor. Therefore, we will be glad to know what your requirement is. Because our focus is providing top quality service, we are performing serious quality checks before delivery of our products. As a result, we do optical parameter measurements, connector cleanness tests and EEPROM memory data validation tests.
