0
  • No products in the cart.
Total:€0.00

CWDM-25G-SFP28-10-XX

Multi-Vendor MSA Compatible CWDM 25G SFP28 Module: CWDM-25G-SFP28-10-XX

CWDM-25G-SFP28-10-XX
# Key Highlights
    • Type:SFP28
    • Compatibility:Multi-Vendor MSA Compatible
    • Tx/Rx Wavelength:Ch. 27 – Ch. 61 (1270nm – 1610nm)
    • Fiber Type:Single-Mode Fiber (SMF)
    • Connectors:Double LC
    • Optical Budget:6.3 dB
    • Max. Distance:10km

 

  • Data Rate:8.5-28.1 Gbps
  • DDM/DOM:Supported
  • Temperature:Standard 0°-70°C
# Pricing & Ordering
SKU: CWDM-25G-SFP28-10-XX

€30.03 – €202.70

Standard recommended retail price without VAT.

Lead Time: Below 1 Week in EU Countries
Clear
# Quality Assurance

Because of our comprehensive Testing Program, we are confident on quality of our products. Such approach empower us to cover all our products with:

# Key Technical Data
Media Type:

Single-Mode Fiber (SMF)
TX Wavelength:

1270 nm, 1290 nm, 1310 nm, 1330 nm, 1350 nm, 1370 nm, 1470 nm, 1490 nm, 1510 nm, 1530 nm, 1550 nm, 1570 nm, 1590 nm, 1610 nm
RX Wavelength:

1270-1610 nm
Minimum Optical Budget:

6.3 dB
Maximum Distance:

10km
Supported Data Rate:

8.5-28.1 Gbps
Supported Applications:

25G Ethernet (25.78Gbps), 10G Ethernet (10.31Gbps)
DDM/DOM:

Supported
Temperature Range:

Standard 0°-70°C
Connectors:

Double LC
Tx Wavelength Bandwidth:

20nm (1260 – 1280 nm)
Rx Wavelength Bandwidth:

G.694.2 CWDM Grid (1270-1610nm)
Minimum Transmitting Power:

-7 dBm
Maximum Transmitting Power:

2 dBm
Receiver Sensitivity:

-13.3 dBm
Receiver Overload:

2.2 dBm
Transmitter Type:

DFB Laser
Receiver Type:

PIN photodiode
Power:

+3.3V single power supply
Chipset:

II-VI, Macom, Neo, Oclaro, Renesas Electronics, MAXIM, SEMTECH, Sumitomo
Compliance:

RoHS-6, SFF-8432, CE, Class 1 FDA and IEC60825-1 Laser Safety Compliant, SFF-8402, SFF-8431, SFF-8472, SFP+ MSA
# Product Documentation
Multi-Vendor MSA Compatible CWDM-25G-SFP28-10-XX SFP28 Datasheet
# Product Description

    CWDM-25G-SFP28-10-XX is a Ch. 27 – Ch. 61 (1270nm – 1610nm) CWDM 25GBASE-LR Multi-Vendor MSA Compatible SFP28 (Small Form-Factor Pluggable 28) Transceiver, operating over Double Fiber Single-Mode Fiber (SMF) optical cable. It has minimum guaranteed optical budget of 6.3 dB, which in most cases is enough to reach 10 km over OS2 fiber. However, distance is just indicative parameter for comfort of identification that is calculated by taking into account minimal optical budget and average attenuation of optical cabling in industry. CWDM-25G-SFP28-10-XX uses top quality DFB (Distributed Feedback Laser) transmitter and 25Gb/s PIN photodiode receiver. CWDM-25G-SFP28-10-XX Ch. 27 – Ch. 61 (1270nm – 1610nm) CWDM 25GBASE-LR supports DDM/DOM optical diagnostics that provide real-time diagnostic information about the present operating conditions. CWDM-25G-SFP28-10-XX operates in Standard 0°-70°C temperature range and has Double LC interface. CWDM-25G-SFP28-10-XX Ch. 27 – Ch. 61 (1270nm – 1610nm) nm CWDM 25GBASE-LR SFP28 support 8.5 – 25.78 Gbps data rate and is designed for 25G Ethernet (25.78 Gbps) and 10G Ethernet (10.31 Gbps) applications. CWDM-25G-SFP28-10-XX SFP28 Double Fiber optical transceiver is multi-purpose module used in number of different places of today’s networking. Consequently, most popular use cases are in Internet Service Provider (ISP) Access and Metro Networks Data Center Core Networks and Enterprise Campus Networks.

    CWDM-25G-SFP28-10-XX Ch. 27 – Ch. 61 (1270nm – 1610nm) nm CWDM 25GBASE-LR SFP28 transceiver is CE/RoHS certified and is compliant with product safety standards. CWDM-25G-SFP28-10-XX is fully compliant to SFF-8431 and SFF-8472 Multi Source Agreement (MSA), IEEE 802.3by 25 Gb/s specification. Consequently, compliance to above standards guarantees that module is compatible and works with majority of networking equipment, where is not implemented special algorithm for protection against third party modules. However – our technical team has accumulated deep expertise in custom-encoded firmware’s for Ch. 27 – Ch. 61 (1270nm – 1610nm) nm CWDM 25GBASE-LR SFP28 transceiver in order to make it work in almost any brand equipment. We will be glad to know your requirements.