Standard recommended retail price without VAT.
100G-CFP-150
MSA Compatible 100GBASE-SR10 CFP Module: 100G-CFP-150
# Key Highlights
- Type: 100GBASE-SR10 CFP
- Compatibility: Multi-Vendor MSA Compatible
- Tx/Rx Wavelength: 850 nm. / 850 nm.
- Laser: VSCEL Laser
- Fiber Type: Multi-Mode Fiber (MMF)
- Connectors: MTP/MPO
- Optical Budget: 1.9dB
- Max. Distance: 150m(OM4), 100m(OM3)
- Data Rate: 103.125-111.81 Gbps
- DDM/DOM: Supported
- Power Consumption: ≤ 7W
- Temperature: Standard 0° – 70°C
# Pricing & Ordering
SKU: 100G-CFP-150
€1,276.28
Lead Time: Below 1 Week in EU Countries
# Quality Assurance
Because of our comprehensive Testing Program, we are confident on quality of our products. Such approach empower us to cover all our products with:
# Key Technical Data
| Media Type: | Multi-Mode Fiber (MMF) |
|---|---|
| Connectors: | MTP/MPO |
| TX Wavelength: | 850 nm. |
| RX Wavelength: | 850 nm. |
| Minimum Optical Budget: | 1.9 dB |
| Maximum Distance: | 150m |
| Supported Data Rate: | 103.125-111.81 Gbps |
| Supported Applications: | 100G Ethernet (103.125Gbps), OTU4 4l1-9D1F (112 Gbps) |
| DDM/DOM: | Supported |
| CDR (Clock and Data Recovery) chip | Supported |
| Transmitter Type: | VSCEL Laser |
| Tx Wavelength Bandwidth: | 20 nm (840-860 nm) |
| Transmit Power Per Lane (Min): | -7.6dBm |
| Receiver Type: | PIN |
| Rx Wavelength Bandwidth: | 20 nm (840-860 nm) |
| Average Receiver Sensitivity (Min) Each Lane: | -9.5 dBm |
| Receiver Overload: | Each Lane 3.4 dB |
| Temperature Range: | Standard 0°-70°C |
| Storage Temperature: | -40° to 85°C |
| Relative Humidity: | 0 to 85% |
| Power Consumption: | ≤7.0W |
| Power: | +3.3V |
| Chipset: | MAXIM, MINDSPEED, SEMTECH, Sumitomo |
| Compliance: | CFP MSA, IEC60825-1 Laser Safety Compliant, IEEE 802.3ba 100GBASE-SR10, SFF-8419, CE, RoHS, SFF-8636 |
# Product Documentation
# Product Description
100G-CFP-150 is Multi-Vendor MSA Compatible 100GBASE-SR10 CFP (Centum Form Factor Pluggable) Transceiver, operating over pair of multi-mode optical fiber. Module has minimum guaranteed optical budget of 1.9 dB, which in most cases is enough to reach 150 m over OM4 multi-mode fiber, or 100 m over OM3 multi-mode fiber. However, distance is just indicative parameter calculated for comfort of identification. Eventually we calculate distance taking in account minimal optical budget and average attenuation of optical cabling in industry. 100G-CFP-150 use 10 x VCSEL (Vertical Cavity Surface Emitting Laser) transmitters operating at nominal wavelength 850 nm and 10 x 850 nm PIN Photodiode receivers. Module support DDM/DOM optical diagnostics, which provide diagnostic information about the present operating conditions. 100G-CFP-150 module requires Single 3.3V Power Supply and has less then 7W power consumption. Module operates in Standard 0°-70°C temperature range, and for interconnections requires standard 24/20 lane optical fiber with MTP/MPO connector.
100GBASE-SR10 CFP support 103.125-111.81 Gbps data rate and such applications as 100G Ethernet (103.125Gbps), Optical Transport Network OTU4 4I1-9D1F (111.81Gbps). 100G-CFP-150 optical transceiver is multi-purpose used in number of different places in today’s networking environment. Most popular applications are Internet Service Provider (ISP) Fiber to the Home Aggregation and Backbone, Mobile Operator Core Networks, Mobile Backhaul and Data Center networking site interconnections.
100G-CFP-150 is CE/RoHS certified and it is Compliant with product safety standards. 100GBASE-SR10 CFP Transceiver is fully compliant to CFP Multi Source Agreement (MSA) IEEE 802.3ba 100GBASE-SR10. Consequently compliance to above standards guarantees that module is compatible and works with majority of networking equipment, where is not implemented special algorithm for protection against third party modules. However – our technical team has accumulated deep expertise in custom-encoded firmware’s for 100GBASE-SR10 CFP transceiver in order to make it work in almost any brand equipment. We will be glad to know your requirements – Contact Us.
