0
  • No products in the cart.
Total:€0.00

BIDI-400G-QSFP-DD-150

400GBASE-SR4 BIDI QSFP-DD
BIDI-400G-QSFP-DD-150
BIDI-400G-QSFP-DD-150
BIDI-400G-QSFP-DD-150

MSA Compatible BIDI 400GBASE-SR4 QSFP-DD

400GBASE-SR4 QSFP-DD BIDI Module (Tx 850 & 908nm, Rx 850 & 908nm, 26.5625 per lane, up to 425 Gbps, Max. 150m (OM5) over MMF with host FEC, 2 dB, Temp. 0-70C, MTP/MPO-12 Connector)

€1,117.20

SKU: BIDI-400G-QSFP-DD-150-MS
5 - Years Warranty
Risk Free Return Policy
Reliable Testing Program
Shipping:Below 1 Week in EU Countries

Similar products:

Cisco Compatible
Key Technical Data
Media Type

Multi-Mode Fiber (MMF)
Connectors

MTP/MPO
TX Wavelength

Ch1: 850nm, Ch2: 908nm
RX Wavelength

Ch1: 850nm, Ch2: 908nm
Optical Budget (Min)

2dB
Max Distance

150m
Data Rate Supported

425 Gbps
Supported Apps

400G Ethernet
DDM/DOM

Supported
FEC (Error Correction)

Host FEC Supported
Transmitter Type

VSCEL Laser
Tx Wave Bandwidth

18nm (900 – 918nm), 19nm (844 – 863nm)
Avg Launch Power (Min)

-6.5 dBm
Avg Launch Power (Max)

4 dBm
Extinction Ratio (Min)

3 dB
Receiver Type

PIN photodiode
Rx Wave Bandwidth

18nm (900 – 918nm), 19nm (844 – 863nm)
Avg Rx Sensitivity (Min)

-8.5 dBm
Avg Rx Sensitivity (Max)

4 dbm
Receiver Overload

5 dBm
Temp Range

Standard 0°-70°C
Storage Temp

-40° to 85°C
Relative Humidity

0 to 85%
Power Consumption

≤ 12W
Power

3.3V
Compliance

400GBASE-SR4, IEC60825-1 Laser Safety Compliant, IEEE 802.3cm, IEEE 802.3bs, CMIS 4.0, QSFP-DD MSA, RoHS-6, CE
Product documentation

BIDI-400G-QSFP-DD-150 is a 400GBASE-SR4 Multi-Vendor MSA Compatible QSFP-DD (Quad Small Form-Factor Pluggable – Double Density) Bi-Direction optical Transceiver designed for operation over Multi-Mode Fiber (MMF). The module accepts 8x 50G (400GAUI-8) host electrical data and transmits them in two groups of optical Bi-Directional lanes (each group contains 4 pairs of optical lane). Reversely, on the receiver side, the module accepts 8 sets of optical input signal and converts them to 8 channels of electrical data. Module has a minimum guaranteed optical budget of 2 dB, which in most cases is enough to reach 150 m distance over OM5 multi-mode fiber. BIDI-400G-QSFP-DD-150 uses top quality VCSEL (Vertical Cavity Surface Emitting Laser) transmitter 850nm for first lane and 908nm for second. Modules also uses 400Gb/s PIN photodiode receiver. The BIDI 400GBASE-SR4 supports DDM/DOM optical diagnostics that provide real-time diagnostic information about the present operating conditions. It operates in Standard 0°-70°C temperature range and has MTP/MPO-12 interface.

The BIDI 400GBASE-SR4 QSFP-DD support up to 425 Gbps data rate and is designed for 400G Ethernet application, typically used for QSFP-DD SR4.2 to QSFP- DD SR4.2 point to point communication and QSFP-DD SR4.2 (BIDI-400G-QSFP-DD-150) to 4x QSFP28 SR1.2 (BIDI-100G-QSFP28-151) breakout communication.

BIDI-400G-QSFP-DD-150 transceiver is CE/RoHS certified and is compliant to QSFP-DD Multi Source Agreement (MSA), CMIS 4.0, IEEE 802.3bs 400 Gbps specification and 400GBASE-SR4. We will be glad to know your requirements!

Related Products

You may also like…