Standard recommended retail price without VAT.
LMQ3921S-PC+
Hisense LMQ3921S-PC+ Compatible 400G 2KM SMF QSFP-DD Transceiver
# Key Highlights
- Type: 400GBASE-DR4+ QSFP-DD
- Compatibility: Hisense Broadband Compatible
- Tx/Rx Wavelength: 4x1310nm PSM4
- Laser: EML
- Modulation: PAM4
- Fiber Type: Single-Mode Fiber (SMF)
- Connectors: MTP/MPO-12
- Optical Budget: 4dB
- Max. Distance: 2km
- Data Rate: 425 Gbps
- FEC Forward Error Correction: Supported
- DDM/DOM: Supported
- Power Consumption: ≤ 12W
- Temperature: Standard 0° – 70°C
# Pricing & Ordering
SKU: 400G-QSFP-DD-2-MS
€495.50
Lead Time: Below 1 Week in EU Countries
# Quality Assurance
Because of our comprehensive Testing Program, we are confident on quality of our products. Such approach empower us to cover all our products with:
# Key Technical Data
| Media Type: | Single-Mode Fiber (SMF) |
|---|---|
| Connectors: | MTP/MPO |
| TX Wavelength: | 1310 nm |
| RX Wavelength: | 1310 nm. |
| Minimum Optical Budget: | 4 dB |
| Maximum Distance: | 2km |
| Supported Data Rate: | 425 Gbps |
| Supported Applications: | 400G Ethernet (412.5Gbps) |
| DDM/DOM: | Supported |
| CDR (Clock and Data Recovery) chip | Supported |
| Forward Error Correction (FEC): | Host FEC Supported |
| Transmitter Type: | EML Laser |
| Tx Wavelength Bandwidth: | 1304.5- 1317.5 nm |
| Average Launch Power (Min) Each Lane: | -2.4 dBm |
| Average Launch Power (Max) Each Lane: | 4 dBm |
| Extinction Ratio (Min): | 3.5 dB |
| Receiver Type: | PIN photodiode |
| Rx Wavelength Bandwidth: | 1304.5- 1317.5 nm |
| Average Receiver Sensitivity (Min) Each Lane: | -6.4 dBm |
| Average Receiver Sensitivity (Max) Each Lane: | 4.5 dBm |
| Receiver Overload: | 5.5 dBm |
| Temperature Range: | Standard 0°-70°C |
| Storage Temperature: | -40° to 85°C |
| Relative Humidity: | 0 to 85% |
| Power Consumption: | ≤12W |
| Power: | +3.3V |
| Chipset: | Inphi |
| Compliance: | 100G Lambda MSA, 400GBASE-DR4, IEC60825-1 Laser Safety Compliant, IEEE 802.3bs, QSFP-DD MSA, RoHS-6, CE |
# Product Documentation
400G-QSFP-DD-2 Datasheet
Hisense Broadband Compatible LMQ3921S-PC+ is based on our product 400G-QSFP-DD-2 When You will order it will be encoded to be compatible with Hisense Broadband equipment and it will be labeled with part number: 400G-QSFP-DD-2-MS, where MS means Hisense Broadband Compatible. Above You can download the datasheet of our 400G-QSFP-DD-2.
# Product Description
Our Compatible Hisense Broadband LMQ3921S-PC+ QSFP-DD transceiver is based on our 400G-QSFP-DD-2 product, which has the same parameters and is manufactured in accordance with the same industry standards as its OEM counterpart. Our compatible module version is designed for operation over a Double Fiber Single-Mode Fiber (SMF) optical cable. It has a minimum guaranteed optical budget of 4 dB, which typically is enough to reach about 2 km. However, distance is only an indicative parameter calculated for identification comfort. Finally, we calculate distance while keeping in mind the minimum (guaranteed) optical budget and the average attenuation of optical cabling in the industry. Our Hisense Broadband LMQ3921S-PC+ compatible transceiver uses a high-quality EML Laser transmitter operating at 4x1310nm PSM4 nominal wavelength and a 4x1310nm PSM4 PIN Photodiode receiver. This module supports DDM/DOM optical diagnostics and provides diagnostic data about the current operating conditions. This compatible module has a MTP/MPO-16 connector and module is designed for operation in standard temperature networking environments ranging from 0°-70°C. The transceiver chipset supports data rates ranging from 425 Gbps and such applications as 400G Ethernet (412.5Gbps). It is important to note that the mentioned application support will vary depending on the port where the module will be used, and it supported applications as well as module speed configuration during ordering process, but we can ensure that our module will support at least the same functionality as its OEM counterpart. This is a multi-purpose transceiver that can be used in a variety of different places in today’s networking. As a result, Internet Service Provider (ISP) Aggregation and Backbone, Mobile Operator Core Networks and Data Center Core Network interconnections are the most popular applications for this product.
Our compatible Hisense Broadband LMQ3921S-PC+ module is CE/RoHS certified, it meets product safety standards, and is compliant with QSFP-DD Multi Source Agreement (MSA) QSFP-DD MSA industry standard. To ensure smooth operation, we have completed compatibility tests for this module with the most recent platforms of Hisense Broadband networking equipment, allowing us to encode transceiver EEPROM memory to be compatible with and work seamlessly in Hisense Broadband platforms. We are committed to quality, therefore before delivering our products, we conduct stringent quality inspections that include optical parameter measurements, connector cleanliness tests, and EEPROM memory data validation tests. If you have any questions, please Contact us. We will gladly learn about your needs and recommend the best compatible products from our portfolio.
