Standard recommended retail price without VAT.
€1,426.43
Standard recommended retail price without VAT.
Because of our comprehensive Testing Program, we are confident on quality of our products. Such approach empower us to cover all our products with:
Media Type: | Single-Mode Fiber (SMF) |
---|---|
Connectors: | Single LC |
TX Wavelength: | 1295.56nm, 1300.05nm, 1304.58nm, 1309.14nm |
RX Wavelength: | 1273.55nm, 1277.89nm, 1282.26nm, 1286.66nm |
Minimum Optical Budget: | 10.2 dB (with FEC) |
Maximum Distance: | 20km |
Supported Data Rate: | 103.125 Gbps |
Supported Applications: | 100G Ethernet (103.125Gbps) |
Modulation | NRZ (Non-return-to-zero) |
DDM/DOM: | Supported |
CDR (Clock and Data Recovery) chip | Supported |
Forward Error Correction (FEC): | Host FEC Supported |
Transmitter Type: | EML TOSA |
Tx Wavelength Bandwidth: | 4 LAN WDM Separated Lanes (9.02 nm 1295.56 – 1304.58nm) (L0 Tx center 1295.56nm, L1 Tx center 1300.05nm, L2 Tx center 1304.58nm, L3 Tx center 1309.14nm) |
Average Launch Power (Min) Each Lane: | -4.3 dBm |
Average Launch Power (Max) Each Lane: | 4.5 dBm |
Receiver Type: | PIN ROSA |
Rx Wavelength Bandwidth: | 4 LAN WDM Separated Lanes (13.11 nm 1273.55 – 1286.66nm) (L0 Tx center 1273.55nm, L1 Tx center 1277.89nm, L2 Tx center 1282.26nm, L3 Tx center 1286.66nm) |
Average Receiver Sensitivity (Min) Each Lane: | -14.5 dBm |
Average Receiver Sensitivity (Max) Each Lane: | 4.5 dBm |
Receiver Overload: | 5.5 dBm |
Temperature Range: | Extended -20° to 85°C |
Storage Temperature: | -40° to 85°C |
Relative Humidity: | 0 to 85% |
Power Consumption: | ≤5W |
Power: | +3.3V |
Compliance: | CAUI-4, IEEE 802.3cu, SFF-8679, CE, QSFP28 MSA, RoHS |
Nokia Compatible 3AL82179AAAA Module is based on our product BIDI-100G-QSFP28-20B. When You will order it will be encoded to be compatible with Nokia equipment and it will be labeled with part number: BIDI-100G-QSFP28-20B-NK, where NK means Nokia Compatible. Above You can download datasheet of our BIDI-100G-QSFP28-20B product.
3AL82179AAAA Nokia Compatible transceiver is based on our BIDI-100G-QSFP28-20B product, which has the same parameters and is manufactured in accordance with the same industry standards as its OEM counterpart.) Our Nokia QSFP28 100GBASE 4WDM-20 20km BiDi SMF WOTRETCTAA Transceiver designed for operation over Single-Mode Fiber (SMF). Our Nokia compatible transceiver hardware building principles are similar as traditional 100G LR4, 100G ER4 modules as it has cooled 4x25Gb/s LAN-WDM NRZ (non return to Zero) modulated, EML lasers, therefore modules can be used in legacy 100G switches and routers and not require PAM4 modulation support or RS (544,514) FEC support to achieve desired distance as it is required by BIDI 100G PAM4 module series. 100G BIDI transceivers are designed for dense applications and provide the ability for operators and service providers to save optical fiber resources.
3AL82179AAAA Nokia Compatible transceiver has a minimum guaranteed optical budget of 10.2 dB, which in most cases is enough to reach 20km over OS2 single-mode fiber with RS(528,514) FEC enabled on the host device. Without RS(528,514) FEC enabled reach will be lower. However, distance is just an indicative parameter calculated for comfort of identification. Eventually we calculate distance taking in account minimal optical budget and average attenuation of optical cabling in industry. Our Nokia compatible QSFP28 100GBASE 4WDM-20 20km BiDi SMF WOTRETCTAA transceivers uses 4 channel 25 Gbps 1295.56nm, 1300.05nm, 1304.58nm, 1309.14nm EML (External Modulation Laser) transmitters and 4 channel 25 Gbps 1273.55nm, 1277.89nm, 1282.26nm, 1286.66nm PIN photodiode receivers. On the transmission side module converts four electrical interface lanes (CAUI-4) 25-Gbps into a four 25-Gbps optical signal (NRZ modulated) and reversely at the receiver side four 25-Gbps optical signals are converted into four 25-Gbps electrical signals. Module supports DDM/DOM optical diagnostics, which provide diagnostic information about the present operating conditions. Our Nokia compatble module operates in the industrial -20°-+85°C temperature range and has a Single LC optical connector and 38 pins edge connector for electrical interface. Our Nokia compatible transceiver supports 103.1 Gbps data rate and such applications as 100G Ethernet.
3AL82179AAAA Nokia Compatible transceiver are CE/RoHS2.0 certified and are compliant with product safety standards. QSFP28 100GBASE 4WDM-20 20km BiDi SMF WOTRETCTAA transceivers are fully compliant to QSFP28 MSA (Multi Source Agreement), where IEEE 802.3cu defines physical and management layer specifications CAUI-4 electrical interface, SFF-8679 defines QSFP+ 4X Hardware and Electrical Specification. Because our focus is providing top quality service, we are performing serious quality checks before delivery of our products. As a result, we do optical parameter measurements, connector cleanness tests and QSFP28 transceiver EEPROM memory data validation tests. For more info don’t hesitate to Contact Us.