1AB390930013 Nokia Compatible 10GBASE-LR SFP+ Transceiver

The EdgeOptic 10G-SFP-10 is a 10GBASE-LR SFP+ transceiver coded for Nokia (Alcatel-Lucent) 1AB390930013 compatibility, operating at 1310nm over single-mode fiber to 10km with a duplex LC/UPC connector. The module is Nokia EEPROM coded for the 7210 SAS platform family.

Transmit side uses a 1310nm DFB laser with a PIN photodiode receiver. Link budget is 6dB over G.652 single-mode fiber. Line rate is 10.3125 Gbps with 64B/66B encoding per IEEE 802.3ae.

Compatible with Nokia 7210 SAS series service access switches with SFP+ ports, including the SAS-T, SAS-Sx, SAS-S, and SAS-R series. SAS-M variants with 10G uplinks also accept this module — confirm your specific chassis model supports SFP+ 10G. The module is EEPROM coded for 7210 SAS SR OS and recognized natively — no manual configuration required.

The 1AB390930013 is for the 7210 SAS. Nokia 7750 SR platforms use 3HE-prefix part numbers for the same 10GBASE-LR optical spec but with different EEPROM coding. Nokia acquired Alcatel-Lucent in 2016; ALU-branded 7210 SAS equipment uses the same part numbers.

DDM (SFF-8472) supported for real-time optical and electrical monitoring. MSA compliant (SFF-8431, IEEE 802.3ae). Class 1 laser safety (IEC 60825-1). CE and RoHS certified, commercial temperature 0°C to 70°C.

Operates over G.652 single-mode fiber (OS1/OS2 compliant). On short patch runs, an inline attenuator may be needed to keep received power below the overload threshold.

G.652 single-mode fiber has an attenuation of approximately 0.35 dB/km at 1310nm. Over a 10km span, fiber loss consumes about 3.5 dB of the optical power budget. Connector insertion loss runs 0.5 dB per mated UPC pair; fusion splices add 0.1 dB each. A 10km link with two connector pairs and a few splices consumes roughly 4.5–5 dB, leaving 1–1.5 dB of margin against the 6 dB budget.

10GBASE-LR covers enterprise and campus backbones, inter-building links, metro access and aggregation rings, carrier backhaul, and dark-fiber DCI. The 10km reach is sufficient for most metro and enterprise applications without moving to longer-reach ER or ZR optics. For spans near the 10km limit, measure installed attenuation with an OTDR or optical loss meter before commissioning.

LC connector endfaces should be inspected and cleaned before every mate. Contaminated or scratched connectors are a common cause of link degradation at 10G rates: a single particle larger than the mode field diameter can add several dB of loss. Use IEC 61300-3-35 visual inspection grading and dry or wet cleaning methods before installation.

Lifetime warranty included. For volume pricing, contact our sales team.