HPE Aruba J9153D Compatible 10GBASE-ER SFP+ 40km 1550nm Transceiver

Aruba
SFP+
10G
Duplex
40 km
HPE Aruba J9153D compatible 10G SFP+ LC ER 40km SMF Transceiver

Aruba compatible J9153D - Key Features

  • Compatibility: Aruba
  • Media Type: Single-Mode Fiber (SMF)
  • Fiber Count: Duplex
  • Connector: Double LC/UPC
  • Maximum Distance: 40 km
  • Average Link Budget: 15 dB
  • Tx Wavelength: 1550 nm
  • Supported Data Rate: 1.25 Gbps - 11.32 Gbps
  • DDM/DOM: Supported
  • Temperature Range: Standard 0°-70°C

Aruba J9153D Price

Lead timeIn Stock - Ships Next Business Day
Standard recommended retail price ex VAT:
72.29
Choice of 0+
Telecoms & Integrators Globally

Aruba compatible J9153D Specifications

Form Factor
SFP+
Media Type
Single-Mode Fiber (SMF)
Fiber Count
Duplex
Connector
Double LC/UPC
Maximum Distance
40 km
Average Link Budget
15 dB
TX Wavelength
1550 nm
RX Wavelength
1550 nm
Supported Data Rate
1.25 Gbps - 11.32 Gbps
Supported Ethernet Applications
10G Ethernet (10.31Gbps), Gigabit Ethernet (1.25 Gbps)
Supported Fiber Channel Applications
10G Fiber Channel (10.52 Gbps), 1G Fiber Channel (1.0625 Gbps), 2G Fiber Channel (2.125 Gbps), 4G Fiber Channel (4.25 Gbps), 8G Fiber Channel (8.5 Gbps)
SDH/SONET Standards
STM-64 (9.95Gbps)
DDM/DOM
Supported
Tx Wavelength Bandwidth
37 nm (1528-1565 nm)
Rx Wavelength Bandwidth
37 nm (1528-1565 nm)
Minimum Transmitting Power
-1 dBm
Maximum Transmitting Power
4 dBm
Receiver Sensitivity
-16 dBm
Receiver Overload
0 dBm
Dispersion
800-1000 ps/nm
Transmitter Type
DFB Laser
Receiver Type
PIN photodiode
Temperature Range
Standard 0°-70°C
Power
+3.3V single power supply
Compliance
CE,Class 1 FDA and IEC60825-1 Laser Safety Compliant,RoHS,SFF-8431,SFP MSA

Aruba compatible J9153D Datasheet

v4

Complete technical specifications and product details

Updated:Jan 16, 2026Format:PDF

Aruba compatible J9153D Description

EdgeOptic's J9153D compatible is an Aruba-coded version of the EdgeOptic 10G-SFP-40 multi-vendor 10GBASE-ER SFP+ transceiver. J9153D is the current ordering code in the HPE Aruba X132 10G SFP+ LC ER family; J9153A is the original revision. Verify interchangeability with earlier revisions (J9153A, B, C) against the HPE Aruba Transceiver Guide and QuickSpecs for your switch model. The module registers cleanly on Aruba switches because the EEPROM identifies as an HPE Aruba part.

The optical layer uses a DFB laser transmitter and PIN photodiode receiver at 1550 nm over standard ITU-T G.652 single-mode fiber. Launch power runs from −1 to +4 dBm and receiver sensitivity reaches −16 dBm for a 15 dB link budget across the full 40 km reach, with receiver overload set at 0 dBm. The chromatic dispersion tolerance covers the 800 to 1000 ps/nm range typical of 40 km G.652 spans at 1550 nm. The data rate envelope spans 1.25 to 11.32 Gbps on the underlying hardware; the Aruba campus switching application scope for this part runs 10GE and 1GE Ethernet only.

Form factor is industry-standard SFP+ per the SFF-8431 MSA, with an LC duplex fiber interface and the standard 20-pin SFP host connector. DDM/DOM diagnostics over the SFF-8472 two-wire serial interface report real-time TX power, RX power, laser bias current, module temperature, and supply voltage, readable via show interface transceiver commands on ArubaOS-Switch and ArubaOS-CX, or via SNMP for NMS integration. The module is hot-pluggable into any compatible SFP+ port. Supply rail is +3.3 V at 1 W typical power dissipation, and the standard 0 to 70 °C commercial temperature range covers temperature-controlled wiring closets and data center cabinets. Compliance covers CE, Class 1 FDA laser safety per IEC 60825-1, RoHS, and the SFP+ MSA SFF-8431.

J9153D is positioned as an HPE Aruba campus switching transceiver for ArubaOS-Switch and ArubaOS-CX platforms, distinct from the EdgeConnect gateway family with its EC- ordering codes. Verify the exact part against the HPE Aruba Transceiver Guide and the QuickSpecs for your switch model and software release before ordering. Backed by 15+ years of EdgeOptic compatibility engineering across vendor optical platforms. Ships next business day from EU stock with a lifetime warranty. To discuss volume orders or platform-specific qualification, contact our sales team.

Frequently Asked Questions about HPE Aruba J9153D Compatible

What is the difference between the HPE Aruba J9153A and J9153D?

J9153D is the current ordering code in the HPE Aruba X132 10G SFP+ LC ER family; J9153A is the original revision. The optical specification stays 10GBASE-ER, 1550 nm, 40 km on G.652 SMF across the X132 LC ER family. Verify exact J9153A to J9153D interchangeability for your switch model against the HPE Aruba Transceiver Guide and QuickSpecs.