Brocade/Ruckus 10G-SFPP-T Compatible 10GBASE-T SFP+ Copper Transceiver for ICX 7250, 7450, 7650 and 7750

EdgeOptic's Brocade/Ruckus 10G-SFPP-T compatible is a Brocade-coded full-power 10GBASE-T copper SFP+ transceiver for Brocade and Ruckus ICX switches. The 10G-SFPP-T is the standard-power SKU in the Brocade/Ruckus 10GBASE-T SFP+ line, distinct from the Low-Power 10G-SFPP-TX-LP-A which is intended for thermally constrained ICX 7850 deployments. EdgeOptic programs the module EEPROM with Brocade-recognised vendor identity so FastIron accepts the transceiver under its standard module validation. The part is intended as a drop-in alternative to the native Brocade/Ruckus 10G-SFPP-T on equipment that carries the OEM SKU in its ICX hardware compatibility guidance.

The transceiver operates per IEEE 802.3an for 10GBASE-T, IEEE 802.3bz for 2.5GBASE-T and 5GBASE-T, and IEEE 802.3ab for 1000BASE-T fallback. Reach is up to 30 m on Cat6a or Cat7 unshielded twisted-pair. The electrical and management interfaces follow SFF-8431 and SFF-8432, which are the governing MSAs for SFP+ class copper modules. Operating temperature covers 0 to 65 °C commercial grade, with CE and RoHS certification. The module draws more power than a fibre SFP+ and requires a high-power SFP+ cage, which the ICX 7250, 7450, 7650 and 7750 support on their 10G SFP+ ports.

Because the 10G-SFPP-T is a copper module, DOM telemetry is scoped to the fields that apply to a non-optical SFP+: case temperature, supply voltage, and link status. There is no laser, so transmit optical power, receive optical power, and laser bias current do not exist on this part and are not reported. Management tooling that expects optical DDM values should be configured to treat this module as a copper transceiver.

Target deployment is the Brocade and Ruckus ICX switch line: ICX 7250, ICX 7450, ICX 7650 and ICX 7750 chassis, covering campus and distribution deployments where the full-power 10GBASE-T SFP+ envelope is available on the port. ICX 7850 and other thermally constrained chassis belong on the Low-Power 10G-SFPP-TX-LP-A compatible page; those deployments require the Low-Power SKU to stay within the available SFP+ power budget. Brocade was acquired into Ruckus and then CommScope, so this SKU circulates under both Brocade and Ruckus branding in installed inventory; the part is the same module in either case. FastIron accepts standard 10G SFP+ transceivers across the supported ICX releases; verify the running FastIron version against the Brocade/Ruckus ICX hardware installation guide for the target chassis.

For volume pricing, FastIron release guidance, or ICX platform confirmation, contact our sales team.