10G-SFPP-ZR-2 Brocade/Ruckus compatible 10GBASE-ZR SFP+ Module

The 10G-SFPP-ZR-2 ordering code appears in third-party distributor listings, where it is described as a multi-unit (two-unit) pack of the 10G-SFPP-ZR optic. The Brocade and Ruckus optics datasheets themselves list only the single-unit 10G-SFPP-ZR code, so treat the pack designation as a distributor convention rather than an OEM-documented variant. Either way the optical module is the same, with no spec difference between the codes. EdgeOptic supplies the compatible optic by the unit, so order the quantity the deployment needs rather than matching a fixed pack size; a purchase requisition that lists a 10G-SFPP-ZR-2 line item points to this same compatible part.

EdgeOptic's 10G-SFPP-ZR-2 compatible is a Brocade (Ruckus)-coded version of the EdgeOptic 10G-SFP-80 multi-vendor 10GBASE-ZR transceiver. Optically each unit is a 1550 nm 10GBASE-ZR build: an EML transmitter delivering 0 to +5 dBm, an APD receiver rated better than −24 dBm, a 23 dB link budget for reaches to 80 km on single-mode fiber, and 1600 ps/nm of chromatic dispersion tolerance. The interface is a duplex LC on standard SMF, and the part seats in any SFP+ host cage that accepts a long-reach module.

The optic exposes its operating state through DOM/DDM telemetry to SFF-8472, covering transmit and receive optical power, temperature, laser bias, and supply voltage. It draws a single +3.3V rail across the standard 0 to 70 degrees C range. Its 10GBASE-ZR build serves 10G and Gigabit Ethernet on Ruckus ICX switching ports. Because a ZR transmitter launches hotter than short-reach SFP+ optics, a span well inside the 80 km design reach may need an in-line attenuator so received power stays below the receiver overload point. SFP+ and XFP cages differ mechanically, so check the host cage type before ordering.

The EEPROM is programmed with Brocade/Ruckus vendor identity so each unit is recognized on Ruckus ICX platforms without a manual override. Check the part against the Ruckus ICX transceiver compatibility table for the firmware build in use before deployment. Every unit meets the SFP+ MSA (SFF-8431) and carries CE, RoHS, and IEC 60825-1 Class 1 laser-safety marks. Backed by 15+ years of EdgeOptic compatibility engineering across vendor optical platforms. To confirm fit for a specific ICX model or order quantity, contact our sales team. Ships next business day from EU stock with a lifetime warranty.