E1MG-SX-OM

Our Compatible E1MG-SX-OM Brocade/Ruckus Transceiver is based on our 1.25G-SFP-550D product, which has the same parameters and is manufactured in accordance with the same industry standards as its OEM counterpart. Our compatible module version is designed for operation over a Double Fiber Multi-Mode Fiber (MMF) optical cable. It has a minimum guaranteed optical budget of 7.5 dB, which typically is enough to reach about 550 meters over OM3 type fiber or using higher category MMF fiber such as OM4 or OM5. However, distance is only an indicative parameter calculated for identification comfort. Finally, we calculate distance while keeping in mind the minimum (guaranteed) optical budget and the average attenuation of optical cabling in the industry. Our E1MG-SX-OM Brocade/Ruckus compatible transceiver uses a high-quality VSCEL Laser transmitter operating at 850 nm nominal wavelength and a 850 nm PIN Photodiode receiver. This module supports DDM/DOM optical diagnostics and provides diagnostic data about the current operating conditions. This compatible module has a Double LC connector and module is designed for operation in standard temperature networking environments ranging from 0°-70°C. The transceiver chipset supports data rates ranging from 1.063-1.25Gbps and such applications as Gigabit Ethernet (1.25 Gbps), 1G Fiber Channel (1.0625 Gbps). It is important to note that the mentioned application support will vary depending on the port where the module will be used, and it supported applications as well as module speed configuration during ordering process, but we can ensure that our module will support at least the same functionality as its OEM counterpart. This is a multi-purpose transceiver that can be used in a variety of different places in today’s networking. As a result, Internet Service Provider (ISP) Gigabit Ethernet communication links, Enterprise LAN Networks, Data Center LAN Networks, and other optical links are the most popular applications for this product.

Our compatible E1MG-SX-OM Brocade/Ruckus  Transceiver is CE/RoHS certified, it meets product safety standards, and is compliant with SFP Multi Source Agreement (MSA) SFF-8477 industry standard. To ensure smooth operation, we have completed compatibility tests for this module with the most recent platforms of Brocade/Ruckus networking equipment, allowing us to encode transceiver EEPROM memory to be compatible with and work seamlessly in Brocade/Ruckus platforms. We are committed to quality, therefore before delivering our products, we conduct stringent quality. To be sure about Brocade/Ruckus compatible Transceiver, please see our E1MG-SX-OM datasheet and specs. If you have any questions, please Contact us. We will gladly learn about your needs and recommend the best compatible products from our portfolio.