QSFP-40G-BD-RX

Our Compatible Cisco 40G BIDI optics Datasheet & Price is based on our product BIDI-40G-QSFP-150, which has the same specifications and is manufactured in accordance with the same industry standards. The Cisco 40G BIDI transceiver is intended for use with Double Fiber Single-Mode Fiber (SMF) optical cable. It has a minimum guaranteed optical budget of 2 dB, which is usually enough to reach up to 150 m distance as per 40GBASE-SR specification. However, distance is only an indicative parameter calculated for identification comfort. Finally, we calculate distance while keeping in mind the minimum optical budget and the average attenuation of optical cabling in industry. Our Cisco QSFP 40G BD Rx compatible module version uses a high-quality VCSEL Laser transmitter with a Ch1:850nm; Ch2:900nm and Ch1:900nm; Ch2:850nm PIN photodiode receiver. DDM/DOM optical diagnostics are supported by this module, which provides diagnostic information about the current operating conditions. Digital diagnostics functions are available via a 2-wire serial interface, as specified in to QSFP 40GBASE-SR-BiDi MSA. The compatible Cisco QSFP 40G BIDI module has a Double LC interface and operates in the standard 0°-70°C temperature range. This QSFP module supports data rates ranging from 39.81 – 44.8 Gbps data rate and such applications as 40G Ethernet (41.25Gbps), STM-256 (39.81 Gbps), OTU3 (43.01Gbps), OTU3e2 (44.58Gbps). Our Cisco 40G BIDI optics module is a multi-purpose module that can be used in a variety of networking applications. Consequently, most popular applications are Internet Service Provider, Fiber to The Home routing and switching equipment with Cisco QSFP 40G BIDI compatible interfaces, Mobile Operator Core and Backhaul applications, Data Center networking for Ethernet connections and other optical fiber links. Our Compatible Cisco 40G BIDI transceiver has proven to be reliable in temperature-controlled server rooms over a long period of time. Cisco 40G BIDI transceiver compatible transceivers do not require any maintenance while in use. The only possible maintenance requirement could occur during cable replacement, when the transceiver connector must be thoroughly cleaned of dust using special optical connector cleaning tools. Therefore, ensuring the best connection possible – leading to best performance!
Our Compatible Cisco QSFP 40G BIDI Datasheet and Price are based on our product BIDI-40G-QSFP-150, which is CE/RoHS certified and fulfills product safety standards. We perform compatibility tests for Cisco compatible Cisco QSFP 40G BIDI Module with the most recent Cisco networking equipment platforms, allowing us to encode transceiver EEPROM memory to be compatible with and work seamlessly with Cisco platforms. Furthermore, our optical transceivers comply with the QSFP+ Multi Source Agreement industry standard SFF-8431. Because we are committed to providing high-quality service, we conduct rigorous quality checks before delivering our products. As a result, we perform optical parameter measurements, connector cleanness tests, and EEPROM memory data validation tests on QSFP+ transceivers. Please contact us if you require any additional information Contact Us!

..