CWDM-SFP10G-1570 Cisco Compatible 10G 40KM SMF SFP+ module

The CWDM-SFP10G-1570 is a Cisco compatible SFP+ (Small Form-factor Pluggable) Transceiver that operates over a Double Fiber CWDM Single-Mode Fiber (SMF) optical connection. The module has a minimum assured optical budget of 16 dB, which is usually enough to reach a distance of around 40 kilometers. However, distance is just a guideline parameter being used for ease of identification. Finally, we calculate distance using the industry's average attenuation of optical cabling and the minimum optical budget. The Cisco compliant CWDM-SFP10G-1570 Transceiver uses a high-quality EML Laser transmitter with a nominal wavelength of 1570 nm and a PIN Photodiode receiver with a wavelength of 1270-1610 nm. DDM/DOM optical diagnostics are supported by this module, which provide diagnostic information regarding the current operating conditions. The Cisco compatible CWDM-SFP10G-1570 has a Double LC interface and operates in the standard 0°-70°C temperature range. This CWDM SFP+ optical module supports data rates of 9.95-11.32Gbps for applications such as 10G Ethernet (10.31Gbps), STM-64 (9.95Gbps), OTU2 (10.70Gbps), OTU1e (11.049Gbps), OTU2e (11.095Gps), OTU1f (11.27Gbps), OTU2f (11.32Gbps), ODU2 (10.037Gbps), ODU2e (10.037Gbps), ODU (10.399Gbps). The SFP+ Double Fiber CWDM optical transceiver is a multi-purpose module that can be found in a variety of networking applications. As a result, the most popular applications include Internet Service Provider (ISP) Fiber To The Home aggregation and backbone, Mobile operator core and backhaul SDH/SONET applications, and Data Center networking site interconnections, where operators can save fiber resources and establish long-distance transmission links up to 9x10G channels using Single Fiber CWDM technology or up to 18x10G channels using a Double Fiber CWDM technology

To ensure compatibility, we tested the Cisco compatible CWDM-SFP10G-1570 Transceiver on the most recent Cisco networking systems, allowing us to encode the transceiver's EEPROM memory to be compatible and work seamlessly with Cisco platforms. Cisco compatible CWDM-SFP10G-1570 Transceiver is also fully compliant to SFP+ MSA, SFF-8472, CE, RoHS-6, Class 1 FDA and IEC60825-1 Laser Safety standard. The transceiver is CE/RoHS approved and meets product safety requirements. Because we want to provide the best service possible, we do thorough quality checks on all of our products before they are delivered. As a result, we perform optical parameter measurements, connector cleanliness testing, and EEPROM memory data validation tests on SFP transceivers. We'd love to hear about your requirements – Contact Us.