ONS-SC+-10G-LR Cisco Compatible 10G SFP+ LR Module

Cisco compatible ONS-SC+-10G-LR - Key Features
- Compatibility: Cisco
- Media Type: Single-Mode Fiber (SMF)
- Fiber Count: Duplex
- Connector: Double LC/UPC
- Maximum Distance: 10 km
- Average Link Budget: 6 dB
- Tx Wavelength: 1310 nm
- Supported Data Rate: 1.25 Gbps - 11.32 Gbps
- DDM/DOM: Supported
- Temperature Range: Standard 0°-70°C
Cisco ONS-SC+-10G-LR Price
Cisco compatible ONS-SC+-10G-LR Specifications
Form Factor | SFP+ |
Media Type | Single-Mode Fiber (SMF) |
Fiber Count | Duplex |
Connector | Double LC/UPC |
Maximum Distance | 10 km |
Average Link Budget | 6 dB |
TX Wavelength | 1310 nm |
RX Wavelength | 1310 nm |
Supported Data Rate | 1.25 Gbps - 11.32 Gbps |
Supported Ethernet Applications | 10G Ethernet (10.31Gbps), Gigabit Ethernet (1.25 Gbps) |
Supported Fiber Channel Applications | 10G Fiber Channel (10.52 Gbps), 1G Fiber Channel (1.0625 Gbps), 2G Fiber Channel (2.125 Gbps), 4G Fiber Channel (4.25 Gbps), 8G Fiber Channel (8.5 Gbps) |
SDH/SONET Standards | STM-64 (9.95Gbps) |
DDM/DOM | Supported |
Tx Wavelength Bandwidth | 100 nm (1260-1360 nm) |
Rx Wavelength Bandwidth | 100 nm (1260-1360 nm) |
Minimum Transmitting Power | -8.2 dBm |
Maximum Transmitting Power | 0.5 dBm |
Receiver Sensitivity | -14.5 dBm |
Receiver Overload | 0 dBm |
Dispersion | 70-100 ps/nm |
Transmitter Type | DFB Laser |
Receiver Type | PIN photodiode |
Temperature Range | Standard 0°-70°C |
Power | +3.3V single power supply |
Compliance | CE,Class 1 FDA and IEC60825-1 Laser Safety Compliant,RoHS,SFF-8431,SFP MSA |
Cisco compatible ONS-SC+-10G-LR Datasheet
v4Complete technical specifications and product details
Cisco compatible ONS-SC+-10G-LR Description
ONS-SC+-10G-LR is Cisco’s part number for a 10GBASE-LR SFP+ transceiver qualified for the ONS and NCS optical transport platforms. EdgeOptic’s compatible replacement is built on our 10G-SFP-10 platform and coded with the Cisco vendor OUI that ONS/NCS firmware validates during module insertion. The compatible provides identical optical performance to the original Cisco transceiver in all supported transport platform configurations.
The module transmits at 1310 nm using a DFB laser and receives with a PIN photodiode, providing 10 Gbps over up to 10 km of G.652 single-mode fiber through duplex LC/UPC connectors. It complies with IEEE 802.3ae, SFF-8431, SFF-8432, and SFF-8472 (DDM). The link budget supports the standard maximum channel insertion loss of approximately 6.3 dB. Operating temperature range is 0°C to 70°C, and power consumption stays within the SFP+ MSA limit.
The ONS-SC+-10G-LR belongs to Cisco’s optical transport transceiver catalog, which is distinct from the enterprise switching optics catalog. It is designed for the ONS 15454 MSTP/MSPP platform and the NCS 2000 series (NCS 2006, NCS 2015). These are metro and regional optical transport nodes used in service provider and large enterprise WDM networks. The ONS-SC+-10G-LR typically serves as a client-side optic, connecting a 10GbE client port on a transponder or muxponder card to an external Ethernet switch or router. The line-side optic on the same card faces the DWDM ring or mesh network.
Don’t confuse the ONS-SC+-10G-LR with Cisco’s SFP-10G-LR. Although both are 10GBASE-LR modules with the same underlying optical specifications, the ONS variant carries EEPROM coding specific to the ONS/NCS transport platform. Installing an enterprise SFP-10G-LR in an ONS 15454 slot may result in the transponder card rejecting the optic or CTC (Cisco Transport Controller) reporting it as unsupported. The reverse also applies: using an ONS-coded module in a Catalyst or Nexus switch will trigger unsupported-transceiver warnings. Cisco’s transport optics catalog also includes the ONS-SC+-10G-SR for short-reach multimode connections on the same platforms. EdgeOptic produces each variant as a separate compatible SKU with the correct platform-specific EEPROM coding.
EdgeOptic provides full DDM reporting and a lifetime warranty on all Cisco-compatible transport optics. DDM telemetry is accessible through CTC and TL1 management interfaces on the ONS 15454. For ONS/NCS deployment planning or volume pricing, contact our sales team
Frequently Asked Questions
Can I use the ONS-SC+-10G-LR in a Catalyst switch?
No. The ONS-SC+-10G-LR is coded for Cisco’s optical transport platforms (ONS 15454, NCS 2000). Catalyst and Nexus switches expect the SFP-10G-LR part number. EdgeOptic sells each variant as a separate compatible with the correct EEPROM coding for the target platform.
Where does the ONS-SC+-10G-LR sit in an ONS 15454 shelf?
The ONS-SC+-10G-LR plugs into the client-side SFP+ port on 10G transponder or muxponder cards (such as the 10x10G-LC or TXP-MR-10G). It provides the 10GBASE-LR client interface connecting to an external Ethernet switch or router, while the line-side optic faces the DWDM network.