QSFP-100G-PSM4-S

QSFP-100G-PSM4-S Cisco Compatible 100G 2KM SMF QSFP28 module

# Key Highlights
  • Type:100GBASE-PSM4 & IR4 QSFP28
  • Compatibility:Cisco Compatible
  • Tx/Rx Wavelength:1310nm/1310nm
  • Laser:DML
  • Fiber Type:Single-Mode Fiber (SMF)
  • Connectors:MTP/MPO
  • Optical Budget:8 dB
  • Max. Distance:500m / 2km
  • Data Rate:103.125 Gbps
  • FEC Forward Error Correction:Supported
  • DDM/DOM:Supported
  • Power Consumption:≤3.5W
  • Temperature:Standard 0°-70°C
# Pricing & Ordering
SKU: 100G-QSFP28-2-CI

187.69

Standard recommended retail price without VAT.

Lead Time: Next Business Day from Order Confirmation
# Quality Assurance

Because of our comprehensive Testing Program, we are confident on quality of our products. Such approach empower us to cover all our products with:

# Key Technical Data
Media Type:

4 Lanes of SMF

Connectors:

MTP/MPO

TX Wavelength:

1310 nm.

RX Wavelength:

1310 nm.

Minimum Optical Budget:

8 dB

Maximum Distance:

2km

Supported Data Rate:

103.125 Gbps

Supported Applications:

100G Ethernet (103.125Gbps)

DDM/DOM:

Supported

CDR (Clock and Data Recovery) chip

Supported

Forward Error Correction (FEC):

Host FEC Supported

Transmitter Type:

DML

Minimum Transmitting Power:

Each Lane -3 dB

Tx Wavelength Bandwidth:

95 nm (1260-1355 nm)

Maximum Transmitting Power:

Each Lane 2.3 dB

Average Launch Power (Min) Each Lane:

-2 dBm

Average Launch Power (Max) Each Lane:

2 dBm

Receiver Sensitivity:

Each Lane -8.6 dB

Extinction Ratio (Min):

3.5 dB

Receiver Type:

PIN

Rx Wavelength Bandwidth:

95 nm (1260-1355 nm)

Average Receiver Sensitivity (Min) Each Lane:

-10 dBm

Average Receiver Sensitivity (Max) Each Lane:

3.5 dBm

Receiver Overload:

4.5 dBm

Temperature Range:

Standard 0°-70°C

Storage Temperature:

-40° to 85°C

Relative Humidity:

0 to 85%

Power Consumption:

≤3.5W

Power:

+3.3V

Chipset:

Macom, Sumitomo, Samtech, Oclaro, Avago, II-IV

Compliance:

100G PSM4 MSA, Class 1 FDA, IEC60825-1 Laser Safety Compliant, IEEE 802.3bm, RoHS-6, CE, QSFP28 MSA, SFF-8636, SFF-8665

# Product Documentation
Multi-Vendor MSA Compatible 100G-QSFP28-2 QSFP Datasheet

Cisco Compatible QSFP-100G-PSM4-S QSFP28 Module is based on our product 100G-QSFP28-2. When You will order it will be encoded to be compatible with Cisco equipment and it will be labeled with part number: 100G-QSFP28-2-CI, where CI means Cisco Compatible. Above You can download data-sheet of our 100G-QSFP28-2 product.

# Product Description

Our Compatible Cisco QSFP-100G-PSM4-SQSFP28 transceiver is based on our 100G-QSFP28-2 product, which has the same parameters and is manufactured in accordance with the same industry standards as its OEM counterpart. Our compatible module version is designed for operation over a Double Fiber Single-Mode Fiber (SMF) optical cable. It has a minimum guaranteed optical budget of 4.7 dB, which typically is enough to reach about 2 km. However, distance is only an indicative parameter calculated for identification comfort. Finally, we calculate distance while keeping in mind the minimum (guaranteed) optical budget and the average attenuation of optical cabling in the industry. Our Cisco QSFP-100G-PSM4-S compatible transceiver uses a high-quality DML Laser transmitter operating at 1295.56, 1300.05, 1304.58, 1309.14 nm nominal wavelength and a 1295.56, 1300.05, 1304.58, 1309.14 nm PIN Photodiode receiver. This module supports DDM/DOM optical diagnostics and provides diagnostic data about the current operating conditions. This compatible module has a MTP/MPO connector and module is designed for operation in standard temperature networking environments ranging from 0°-70°C. The transceiver chipset supports data rates ranging from 103.125 Gbps and such applications as 100G Ethernet (103.125 Gbps). It is important to note that the mentioned application support will vary depending on the port where the module will be used, and it supported applications as well as module speed configuration during ordering process, but we can ensure that our module will support at least the same functionality as its OEM counterpart. This is a multi-purpose transceiver that can be used in a variety of different places in today’s networking. As a result, Internet Service Provider (ISP) Aggregation and Backbone, Mobile Operator Core Networks and Data Center Core Network interconnections are the most popular applications for this product.

Our compatible Cisco QSFP-100G-PSM4-S module is CE/RoHS certified, it meets product safety standards, and is compliant with QSFP28 Multi Source Agreement (MSA) SFF-8665 industry standard. To ensure smooth operation, we have completed compatibility tests for this module with the most recent platforms of Cisco networking equipment, allowing us to encode transceiver EEPROM memory to be compatible with and work seamlessly in Cisco platforms. We are committed to quality, therefore before delivering our products, we conduct stringent quality inspections that include optical parameter measurements, connector cleanliness tests, and EEPROM memory data validation tests. If you have any questions, please Contact us. We will gladly learn about your needs and recommend the best compatible products from our portfolio.