407-BBOP Dell Compatible 10G SFP+ LR Module
Dell (Force10) compatible 407-BBOP - Key Features
- Compatibility: Dell (Force10)
- Media Type: Single-Mode Fiber (SMF)
- Fiber Count: Duplex
- Connector: Double LC/UPC
- Maximum Distance: 10 km
- Guaranteed Link Budget: 6 dB
- Tx Wavelenght: 1310 nm
- Supported Data Rate: 1.25 Gbps - 11.32 Gbps
- DDM/DOM: Supported
- Temperature Range: Standard 0°-70°C
Dell (Force10) 407-BBOP Price
SKU:10G-SFP-10-DL
In Stock - Ships Next Business DayDell (Force10) compatible 407-BBOP Specifications
Form Factor | SFP+ |
Media Type | Single-Mode Fiber (SMF) |
Fiber Count | Duplex |
Connector | Double LC/UPC |
Maximum Distance | 10 km |
Guaranteed Link Budget | 6 dB |
TX Wavelength | 1310 nm |
RX Wavelength | 1310 nm |
Supported Data Rate | 1.25 Gbps - 11.32 Gbps |
Supportet Ethernet Applications | 10G Ethernet (10.31Gbps), Gigabit Ethernet (1.25 Gbps) |
Supported Fiber Channel Applications | 10G Fiber Channel (10.52 Gbps), 1G Fiber Channel (1.0625 Gbps), 2G Fiber Channel (2.125 Gbps), 4G Fiber Channel (4.25 Gbps), 8G Fiber Channel (8.5 Gbps) |
SDH/SONET Standards | STM-64 (9.95Gbps) |
DDM/DOM | Supported |
Tx Wavelength Bandwidth | 100 nm (1260-1360 nm) |
Rx Wavelength Bandwidth | 100 nm (1260-1360 nm) |
Minimum Transmitting Power | -8.2 dBm |
Maximum Transmitting Power | 0.5 dBm |
Receiver Sensitivity | -14.5 dBm |
Receiver Overload | 0 dBm |
Dispersion | 70-100 ps/nm |
Transmitter Type | DFB Laser |
Receiver Type | PIN photodiode |
Temperature Range | Standard 0°-70°C |
Power | +3.3V single power supply |
Compliance | CE,Class 1 FDA and IEC60825-1 Laser Safety Compliant,RoHS,SFF-8431,SFP MSA |
Dell (Force10) compatible 407-BBOP Datasheet
v4Complete technical specifications and product details
Dell (Force10) compatible 407-BBOP Description
407-BBOP is Dell's part number for a 10GBASE-LR SFP+ transceiver used in PowerSwitch network switches and PowerEdge server NICs. EdgeOptic's compatible replacement is built on our 10G-SFP-10 platform, matching the original optical and electrical specifications. Dell uses the 407-BBOP number across both its networking and server product lines, covering switch uplinks and server NIC connectivity under a single transceiver SKU.
Dell also references this module under part number 7002X in some configuration tools, older PowerEdge server documentation, and Dell's online parts catalog. Both 407-BBOP and 7002X map to the same 10GBASE-LR SFP+ transceiver. The 407-BBOP format follows Dell's current part numbering convention introduced after the Force10/Dell Networking consolidation, while 7002X uses the legacy alphanumeric format from Dell's earlier server accessory catalog. Procurement systems, Dell Premier, and third-party reseller platforms may list either number depending on the order source and product generation.
Target platforms include Dell PowerSwitch S4048-ON, S5248F-ON, S5296F-ON, Z9264F-ON, and Z9332F-ON in the networking portfolio. On the server side, PowerEdge NICs with SFP+ ports (Broadcom 57810, Intel X710 with Dell firmware, QLogic 578xx) accept 407-BBOP for 10G single-mode fiber connectivity. Dell OS10 and OS9 on PowerSwitch platforms display transceiver details via the show interface transceiver command and report the Dell part number from the module EEPROM. On PowerEdge servers, the iDRAC interface also displays the installed optic information including DDM readings, providing out-of-band visibility without requiring OS-level access to the server. Dell OpenManage Enterprise can aggregate optic health data across the entire PowerEdge fleet for centralized monitoring.
The transceiver operates at 1310 nm with a DFB laser transmitter and PIN photodiode receiver, per IEEE 802.3ae 10GBASE-LR. Reach is 10 km over G.652 single-mode fiber with duplex LC/UPC connectors. DDM per SFF-8472 provides optical power (Tx and Rx), temperature, bias current, and voltage telemetry accessible through Dell OS10 CLI, SNMP, and iDRAC on server platforms. The SFP+ form factor follows SFF-8431/8432 mechanical and electrical specifications.
EdgeOptic's compatible is coded with the Dell vendor identifier for platform recognition on both PowerSwitch and PowerEdge. For Dell infrastructure refresh projects, PowerEdge server NIC upgrades, or cross-referencing 407-BBOP and 7002X in mixed-generation Dell environments, contact our sales team
Frequently Asked Questions
Is the Dell 407-BBOP the same module as the 7002X?
Yes. 407-BBOP and 7002X are two Dell part numbers for the same 10GBASE-LR SFP+. 407-BBOP is the current-format number used in PowerSwitch and newer PowerEdge documentation. 7002X is the older alphanumeric format found in legacy PowerEdge server compatibility lists and some Dell Premier catalogs.
Does the 407-BBOP work in Dell PowerEdge server NICs?
Yes. Dell-qualified NICs in PowerEdge servers (Broadcom 57810, Intel X710 with Dell firmware, QLogic 578xx) accept 407-BBOP. The NIC firmware validates the Dell vendor coding from the transceiver EEPROM. iDRAC also displays the installed optic details for remote management visibility.