Dell Force10 GP-QSFP-40GE-1LR Compatible 40GBASE-LR4 QSFP+ Transceiver
Dell (Force10) compatible GP-QSFP-40GE-1LR - Key Features
- Compatibility: Dell (Force10)
- Media Type: Single-Mode Fiber (SMF)
- Connector: Double LC/UPC
- Fiber Count: Duplex
- Maximum Distance: 10 km
- Average Link Budget: 6.6 dB
- Tx Wavelength: CWDM 4 Ch
- Supported Data Rate: 44.8 Gbps
- DDM/DOM: Supported
- Temperature Range: Standard 0°-70°C
Dell (Force10) GP-QSFP-40GE-1LR Price
Dell (Force10) compatible GP-QSFP-40GE-1LR Specifications
Form Factor | QSFP+ |
Modulation | NRZ (Non-Return to Zero) |
Media Type | Single-Mode Fiber (SMF) |
Connector | Double LC/UPC |
Fiber Count | Duplex |
Maximum Distance | 10 km |
Average Link Budget | 6.6 dB |
TX Wavelength | 4-channel CWDM (1271/1291/1311/1331 nm) |
RX Wavelength | 4-channel CWDM (1271/1291/1311/1331 nm) |
Supported Data Rate | 44.8 Gbps |
Supported Ethernet Applications | 40G Ethernet (41.25Gbps) |
Optical Transport Network (OTN) Applications | OTU3 (43.01Gbps), OTU3e2 (44.58Gbps) |
SDH/SONET Standards | STM-256 (39.81 Gbps) |
DDM/DOM | Supported |
Transmitter Type | DFB Laser |
Tx Wave Bandwidth | 4 WDM Seperated 1310nm Lanes (13 nm (1271, 1291, 1311, 1331)) |
Average Launch Power (Min) Each Lane | -6 dBm |
Average Launch Power (Max) Each Lane | 3 dBm |
Receiver Type | PIN photodiode |
Average Receiver Sensitivity (Min) Each Lane | -12.6 dBm |
Average Receiver Sensitivity (Max) Each Lane | 3 dBm |
Receiver Overload | 3 dBm |
Temperature Range | Standard 0°-70°C |
Storage Temperature | -40° to 85°C |
Relative Humidity | 5 to 85% |
Power | +3.3V single power supply |
Compliance | IEEE 802.3ba, CE, Class 1 FDA and IEC60825-1 Laser Safety Compliant, INF-8438i, QSFP+ MSA, RoHS, SFF-8436 |
Dell (Force10) compatible GP-QSFP-40GE-1LR Datasheet
v2Complete technical specifications and product details
Dell (Force10) compatible GP-QSFP-40GE-1LR Description
EdgeOptic's GP-QSFP-40GE-1LR compatible is a Dell Force10-coded version of the EdgeOptic 40G-QSFP-10 multi-vendor 40GBASE-LR4 transceiver. GP-QSFP-40GE-1LR is the Force10 optics-line ordering code for a 40GBASE-LR4 QSFP+, and EdgeOptic's module ships with EEPROM that Dell Force10 and Dell Networking switches recognize so the port comes up as a matched 40G-LR4 optic.
The optic carries 40GBASE-LR4 across four CWDM channels at 1271, 1291, 1311 and 1331 nm, combined onto a single duplex LC connection over single-mode fiber to 10 km. A DFB laser drives each lane at −6 to +3 dBm, and a PIN photodiode receiver holds −12.6 dBm sensitivity per lane with a +3 dBm overload limit, for an average link budget of 6.6 dB. The module runs NRZ signaling per IEEE 802.3ba Clause 87, follows the QSFP+ MSA, INF-8438i and SFF-8436, and supports DOM across the 0 to 70 °C range.
GP-QSFP-40GE-1LR is designed for Dell Force10 and Dell Networking PowerSwitch platforms that accept 40GBASE-LR4 QSFP+ optics, including the Force10 MXL blade, S4810, S4820T, Z9000 and Z9500 and the PowerSwitch S4048-ON, S6000-ON and Z9100-ON families. Confirm the optic against the Dell compatibility guide for your specific switch model and firmware before deploying. If a fault is traced to a third-party optic, Dell may scope support to its own branded modules, so verify your support terms alongside the platform transceiver table.
Backed by 15+ years of EdgeOptic compatibility engineering across vendor optical platforms. Ships next business day from EU stock with a lifetime warranty.