Edgecore Networks ET4202-SX Compatible 1000BASE-SX SFP
Edgecore Networks compatible ET4202-SX - Key Features
- Compatibility: Edgecore Networks
- Media Type: Multi-Mode Fiber (MMF)
- Fiber Count: Duplex
- Connector: Double LC/UPC
- Maximum Distance: 550 m
- Average Link Budget: 7.5 dB
- Tx Wavelength: 850 nm
- Supported Data Rate: 1.063 Gbps - 1.25 Gbps
- DDM/DOM: Supported
- Temperature Range: Standard 0°-70°C
Edgecore Networks ET4202-SX Price
In Stock - Ships Next Business DayEdgecore Networks compatible ET4202-SX Specifications
Form Factor | SFP |
Media Type | Multi-Mode Fiber (MMF) |
Fiber Count | Duplex |
Connector | Double LC/UPC |
Maximum Distance | 550 m |
Average Link Budget | 7.5 dB |
TX Wavelength | 850 nm |
RX Wavelength | 850 nm |
Supported Data Rate | 1.063 Gbps - 1.25 Gbps |
Supported Ethernet Applications | Gigabit Ethernet (1.25 Gbps) |
Supported Fiber Channel Applications | 1G Fiber Channel (1.0625 Gbps) |
DDM/DOM | Supported |
Tx Wavelength Bandwidth | 20 nm (840-860 nm) |
Rx Wavelength Bandwidth | 20 nm (840-860 nm) |
Minimum Transmitting Power | -9.5 dBm |
Maximum Transmitting Power | 3 dBm |
Receiver Sensitivity | -17 dBm |
Receiver Overload | -3 dBm |
Dispersion | 110 ps/nm ps/nm |
Transmitter Type | VSCEL Laser |
Receiver Type | PIN photodiode |
Temperature Range | Standard 0°-70°C |
Power | +3.3V single power supply |
Compliance | CE, Class 1 FDA and IEC60825-1 Laser Safety Compliant, INF-8074i, RoHS, SFP MSA |
Edgecore Networks compatible ET4202-SX Datasheet
v3Complete technical specifications and product details
Edgecore Networks compatible ET4202-SX Description
EdgeOptic's ET4202-SX compatible is an Edgecore Networks-coded version of the EdgeOptic 1.25G-SFP-550D multi-vendor 1000BASE-SX transceiver. It runs Gigabit Ethernet at 1.25 Gbps (IEEE 802.3z) and 1G Fibre Channel SW at 1.0625 Gbps over duplex multimode fiber, with an 850nm VCSEL transmitter and a PIN photodiode receiver.
A 7.5 dB optical budget carries the link 550m over OM2 multimode fiber (50/125, 500 MHz·km) and 275m over OM1 (62.5/125). The optical interface is duplex LC/UPC, and DDM/DOM diagnostics report optical power, bias current, temperature and supply voltage while the link is up. The module operates across the commercial 0 to 70°C range on a +3.3V supply, built to the INF-8074i SFP MSA, with CE/RoHS and Class 1 laser safety.
ET4202-SX is the Edgecore Networks ordering code for a 1G 550m SFP. The Edgecore datasheet specifies an 850nm VCSEL and PIN photodetector, 50/125 multimode fiber, a duplex LC receptacle, a line rate up to 1.25 Gbps and digital diagnostics, and lists Gigabit Ethernet, Fibre Channel and router or server interfaces as its applications. EdgeOptic codes the EEPROM with Edgecore-recognized data so the module presents to the port as the transceiver the switch expects. It works with Edgecore switch platforms that accept 1G SFP optics; verify your switch model and network-OS release against Edgecore's transceiver and switch compatibility list before ordering.
Backed by 15+ years of EdgeOptic compatibility engineering across vendor optical platforms. Ships next business day from EU stock with a lifetime warranty. For ordering-code confirmation or platform questions, contact our sales team.
Frequently Asked Questions
Is the Edgecore ET4202-SX the same module as the ET4201-SX?
ET4201-SX and ET4202-SX are separate Edgecore ordering codes, and EdgeOptic makes no equivalence or coverage claim between them. The module on this page is coded for ET4202-SX, the 850nm multimode part Edgecore documents at a 550m reach with a duplex LC interface and a gigabit line rate. If your switch documentation calls out ET4201-SX, order against that code rather than treating the two as interchangeable, or contact our sales team and we will confirm the right code for your switch.