Ericsson RDH901029/1 Compatible 10GBASE-ER SFP+ 40km

Ericsson
SFP+
10G
Duplex
40 km
RDH901029/1 Ericsson Compatible 10G 40KM SFP+ Transceiver

Ericsson compatible RDH901029/1 - Key Features

  • Compatibility: Ericsson
  • Media Type: Single-Mode Fiber (SMF)
  • Fiber Count: Duplex
  • Connector: Double LC/UPC
  • Maximum Distance: 40 km
  • Average Link Budget: 15 dB
  • Tx Wavelength: 1550 nm
  • Supported Data Rate: 1.25 Gbps - 11.32 Gbps
  • DDM/DOM: Supported
  • Temperature Range: Standard 0°-70°C

Ericsson RDH901029/1 Price

Lead timeIn Stock - Ships Next Business Day
Standard recommended retail price ex VAT:
64.26
Choice of 0+
Telecoms & Integrators Globally

Ericsson compatible RDH901029/1 Specifications

Form Factor
SFP+
Media Type
Single-Mode Fiber (SMF)
Fiber Count
Duplex
Connector
Double LC/UPC
Maximum Distance
40 km
Average Link Budget
15 dB
TX Wavelength
1550 nm
RX Wavelength
1550 nm
Supported Data Rate
1.25 Gbps - 11.32 Gbps
Supported Ethernet Applications
10G Ethernet (10.31Gbps), Gigabit Ethernet (1.25 Gbps)
Supported Fiber Channel Applications
10G Fiber Channel (10.52 Gbps), 1G Fiber Channel (1.0625 Gbps), 2G Fiber Channel (2.125 Gbps), 4G Fiber Channel (4.25 Gbps), 8G Fiber Channel (8.5 Gbps)
SDH/SONET Standards
STM-64 (9.95Gbps)
DDM/DOM
Supported
Tx Wavelength Bandwidth
37 nm (1528-1565 nm)
Rx Wavelength Bandwidth
37 nm (1528-1565 nm)
Minimum Transmitting Power
-1 dBm
Maximum Transmitting Power
4 dBm
Receiver Sensitivity
-16 dBm
Receiver Overload
0 dBm
Dispersion
800-1000 ps/nm
Transmitter Type
DFB Laser
Receiver Type
PIN photodiode
Temperature Range
Standard 0°-70°C
Power
+3.3V single power supply
Compliance
CE,Class 1 FDA and IEC60825-1 Laser Safety Compliant,RoHS,SFF-8431,SFP MSA

Ericsson compatible RDH901029/1 Datasheet

v4

Complete technical specifications and product details

Updated:Jan 16, 2026Format:PDF

Ericsson compatible RDH901029/1 Description

EdgeOptic's RDH901029/1 compatible is an Ericsson-coded version of the EdgeOptic 10G-SFP-40 multi-vendor 10GBASE-ER SFP+ transceiver. RDH901029/1 is Ericsson's ordering code for the 10GBASE-ER 1550 nm 40 km SFP+ class, and the slash is part of the standard Ericsson part number notation. The module runs 10 Gigabit Ethernet to IEEE 802.3ae over a duplex single-mode fiber pair, with the EEPROM programmed so Ericsson platforms read it as a recognized transceiver.

The optical interface uses a 1550 nm DFB laser transmitter and a PIN photodiode receiver. Transmit power runs from −1 dBm to +4 dBm, receiver sensitivity is better than −16 dBm, and receiver overload is 0 dBm, which gives a 15 dB link budget for reach to 40 km over single-mode fiber. The module carries an LC duplex connector and operates across the 0 to 70 °C commercial temperature range on a +3.3 V supply. Distance is an indicative figure derived from the link budget and typical cable attenuation, so the achievable span depends on the fiber plant, splice loss, and connector count on the route.

Built to the SFP+ form factor, the module follows the SFF-8431 host electrical specification and reports digital diagnostic monitoring per SFF-8472, so transmit power, receive power, laser bias, temperature, and supply voltage are readable from the host. Multi-rate operation spans 1.25 to 11.32 Gbps, covering 1GE and 10GE Ethernet alongside STM-64 SONET/SDH transport. Ericsson Router 6000 and other IP transport and mobile backhaul platforms handle SONET/SDH services where the STM-64 mode applies. Verify the supported rate for the specific platform and software release against Ericsson's technical documentation.

Common deployments include mobile backhaul, IP transport aggregation and backbone links, and service provider site interconnect where a 40 km ER span is needed. The module is CE marked, Class 1 laser rated to IEC 60825-1 and FDA standards, and RoHS compliant.

Backed by 15+ years of EdgeOptic compatibility engineering across vendor optical platforms, the RDH901029/1 compatible ships next business day from EU stock with a lifetime warranty. For platform verification or volume requirements, contact our sales team.

Frequently Asked Questions

Is RDH901029/1 used in Ericsson Router 6000 and other IP transport platforms?

RDH901029/1 is Ericsson's 10GBASE-ER 1550 nm 40 km SFP+ ordering code, the type of optic used in Ericsson Router 6000 and other IP transport and mobile backhaul platforms. Ericsson publishes platform-to-transceiver compatibility through partner channels rather than openly, so verify RDH901029/1 against the technical documentation for your specific Router 6000 or transport platform and software release before deployment.