10053H Extreme Networks Compatible 1G ZX SFP 80km Industrial

10053H is the Extreme Networks part number for a long-haul 1000BASE-X SFP transceiver built for single-mode fiber with Double LC/UPC connectors. Extreme Networks documents the module for links up to 80 km, and treats transmission distance as a nominal guide rather than a fixed guarantee. Actual reach on a given link depends on the fiber's condition and the optical budget remaining after splices and connector loss; Extreme recommends holding back roughly 3 dB of margin for those losses when planning a deployment. The transceiver operates at a center wavelength of 1550 nm across a 37 nm passband spanning 1528 to 1565 nm.

The module supports data rates from 1.063 to 1.25 Gbps, covering Gigabit Ethernet and 1G Fibre Channel applications. EdgeOptic's compatible carries a 24 dB average optical link budget, with minimum transmit power of 0 dBm and maximum transmit power of 5 dBm, receiver sensitivity down to -24 dBm, and a receiver overload point of -3 dBm. Chromatic dispersion tolerance is rated at 1600 ps/nm, consistent with the 80 km reach class. The optical engine pairs a DFB laser transmitter with a PIN photodiode receiver, and the module supports digital diagnostic monitoring (DDM/DOM) for transmit power, receive power, temperature, and bias current readings.

The 10053H is rated for industrial -45°C to +85°C operation, suited to outdoor cabinets, unconditioned enclosures, and other temperature-extreme deployments. It runs from a single 3.3V supply and is qualified to CE, Class 1 laser safety under FDA/IEC 60825-1, the INF-8074i SFP specification, RoHS, and the SFP MSA form factor.

The 10053H is offered as the industrial-temperature member of Extreme's ZX SFP family. Distributor and cross-reference listings associate the H suffix with the industrial-temperature ordering code, but Extreme's published documentation is the authority; verify the exact ordering code and its temperature class against Extreme's own product documentation before matching it to a deployment.

Extreme Networks does not block third-party optical modules in its switches, but it does not guarantee that every third-party module operates correctly on every Extreme platform, and validating operation on the target switch is the buyer's responsibility.

Backed by 15+ years of EdgeOptic compatibility engineering across vendor optical platforms. The 10053H compatible is made to order with a 2-week lead time and a lifetime warranty. For project-quantity pricing or alternative vendor coding, contact our sales team.