Extreme 100G-4WDM-QSFP20KM Compatible 100GBASE-4WDM-20 QSFP28
Extreme compatible 100G-4WDM-QSFP20KM - Key Features
- Compatibility: Extreme
- Media Type: Single-Mode Fiber (SMF)
- Connector: Double LC/UPC
- Fiber Count: Duplex
- Maximum Distance: 20 km
- Average Link Budget: 9 dB
- Tx Wavelength: 1310 nm
- Supported Data Rate: 112 Gbps
- DDM/DOM: Supported
- Forward Error Correction (FEC): Host FEC Supported
- Temperature Range: Standard 0°-70°C
Extreme 100G-4WDM-QSFP20KM Price
In Stock - Ships Next Business DayExtreme compatible 100G-4WDM-QSFP20KM Specifications
Form Factor | QSFP28 |
Modulation | NRZ (Non-Return to Zero) |
Media Type | Single-Mode Fiber (SMF) |
Connector | Double LC/UPC |
Fiber Count | Duplex |
Maximum Distance | 20 km |
Average Link Budget | 9 dB |
TX Wavelength | 4-channel LAN WDM (1295.56/1300.05/1304.58/1309.14 nm) |
RX Wavelength | 4-channel LAN WDM (1295.56/1300.05/1304.58/1309.14 nm) |
Supported Data Rate | 112 Gbps |
Supported Ethernet Applications | 100G Ethernet (103.125 Gbps) |
Supported Fiber Channel Applications | 4x 32G Fiber Channel (112.2Gbps) |
Optical Transport Network (OTN) Applications | OTU4 (112 Gbps) |
DDM/DOM | Supported |
Forward Error Correction (FEC) | Host FEC Supported |
Transmitter Type | EML Laser |
Tx Wave Bandwidth | 4 LAN WDM Seperated 1310 nm Lanes (15.66 nm 1294.53 – 1310.19nm) (L0 Tx center 1295.56nm, L1 Tx center 1300.05nm, L2 Tx center 1304.58nm, L3 Tx center 1309.14nm) |
Average Launch Power (Min) Each Lane | -1 dBm |
Average Launch Power (Max) Each Lane | 4.5 dBm |
Extinction Ratio (Min) | 4 dB |
Receiver Type | PIN photodiode |
RX Wave Bandwidth | 4 LAN WDM Seperated 1310 nm Lanes (15.66 nm 1294.53 – 1310.19nm) (L0 Tx center 1295.56nm, L1 Tx center 1300.05nm, L2 Tx center 1304.58nm, L3 Tx center 1309.14nm) |
Average Receiver Sensitivity (Min) Each Lane | -11 dBm |
Average Receiver Sensitivity (Max) Each Lane | 0 dBm |
Receiver Overload | 3.3 dBm |
Temperature Range | Standard 0°-70°C |
Storage Temperature | -40° to 85°C |
Relative Humidity | 5 to 85% |
Power Consumption (Max) | 3.5 W |
Power | +3.3V single power supply |
Compliance | CE, RoHS, Class 1 FDA and IEC60825-1 Laser Safety Compliant, IEEE 802.3ba, IEEE 802.3bm, 100GBASE-LR4, 128GFC Gen 6, OTN OTU4, QSFP28 MSA, SFF-8636 (Management Interface for 4-lane modules), SFF-8665 |
Extreme compatible 100G-4WDM-QSFP20KM Datasheet
v2Complete technical specifications and product details
Extreme compatible 100G-4WDM-QSFP20KM Description
EdgeOptic's 100G-4WDM-QSFP20KM compatible is an Extreme Networks-coded version of the EdgeOptic 100G-QSFP28-20 multi-vendor 100GBASE-LR4 20km transceiver. It is a QSFP28 module built to the 100G 4WDM-20 MSA (100GBASE-4WDM-20) specification, reaching 20km over duplex single-mode fiber with a 9 dB minimum optical budget. The four LAN-WDM channels sit at 1295.56, 1300.05, 1304.58 and 1309.14 nm and terminate on a duplex LC/UPC connector.
The 20km 4WDM-20 reach depends on host-side RS-FEC RS(528,514) per IEEE 802.3bj. The MSA assigns that error correction to the host, so the target Extreme Networks port must have RS-FEC enabled. The IEEE 802.3ba Clause 88 LAN-WDM lane plan covers the 10km LR4 baseline only; the 20km reach comes from the 4WDM-20 MSA, not from 802.3ba.
The transmitter uses an EML laser and the receiver a PIN photodiode. Per-lane launch power runs from −1 to +4.5 dBm, receiver sensitivity is −11 dBm per lane and the receiver overload point is +3.3 dBm. The module draws up to 3.5 W and operates across the 0 to 70°C commercial temperature range with full DDM/DOM diagnostics. Beyond 100G Ethernet at 103.125 Gbps, the chipset also carries 128G Fibre Channel (Gen 6, 112.2 Gbps) and OTU4 (112 Gbps), so the same part covers Ethernet, storage and OTN transport on supported host ports.
Backed by 15+ years of EdgeOptic compatibility engineering across vendor optical platforms. Ships next business day from EU stock with a lifetime warranty. For deployment questions or bulk pricing, contact our sales team.
Frequently Asked Questions
Does 100G-4WDM-QSFP20KM require FEC enabled on the Extreme Networks port?
Yes. The 20km 4WDM-20 reach relies on host-side RS-FEC RS(528,514) per IEEE 802.3bj, which the MSA assigns to the host rather than the module. Verify that FEC mode is enabled on the target Extreme Networks port before deployment, and check the Extreme Networks documentation for the port FEC configuration on your platform and software release.