Extreme Networks 25G-SR-SFP100M Compatible 25GBASE-SR SFP28
Extreme compatible 25G-SR-SFP100M - Key Features
- Compatibility: Extreme
- Media Type: Multi-Mode Fiber (MMF) -OM3/OM4/OM5
- Fiber Count: Duplex
- Connector: Double LC/UPC
- Maximum Distance: 100 m
- Average Link Budget: 5.3 dB
- Tx Wavelength: 850 nm
- Supported Data Rate: 8.5 Gbps - 25.78 Gbps
- DDM/DOM: Supported
- Forward Error Correction (FEC): Host FEC Supported
- Temperature Range: Standard 0°-70°C
Extreme 25G-SR-SFP100M Price
In Stock - Ships Next Business DayExtreme compatible 25G-SR-SFP100M Specifications
Form Factor | SFP28 |
Media Type | Multi-Mode Fiber (MMF) -OM3/OM4/OM5 |
Fiber Count | Duplex |
Connector | Double LC/UPC |
Maximum Distance | 100 m |
Average Link Budget | 5.3 dB |
TX Wavelength | 850 nm |
RX Wavelength | 850 nm |
Supported Data Rate | 8.5 Gbps - 25.78 Gbps |
Supported Ethernet Applications | 10G Ethernet (10.31Gbps), 25G Ethernet (25.78Gbps) |
DDM/DOM | Supported |
Forward Error Correction (FEC) | Host FEC Supported |
Transmitter Type | VSCEL Laser |
Average Launch Power (Min) Each Lane | -5 dBm |
Average Launch Power (Max) Each Lane | 2.4 dBm |
Extinction Ratio (Min) | 3 dB |
Receiver Type | PIN photodiode |
Rx Wavelength Bandwidth | 20 nm |
Average Receiver Sensitivity (Min) Each Lane | -10.3 dBm |
Average Receiver Sensitivity (Max) Each Lane | 2.4 dBm |
Receiver Overload | 2.4 dBm |
Temperature Range | Standard 0°-70°C |
Storage Temperature | -40° to 85°C |
Relative Humidity | 5 to 85% |
Power Consumption (Max) | 0.3 W |
Power | +3.3V single power supply |
Compliance | SFF-8432, CE, Class 1 FDA and IEC60825-1 Laser Safety Compliant, RoHS, SFF-8431, SFF-8472, SFP28 MSA |
Extreme compatible 25G-SR-SFP100M Datasheet
v3Complete technical specifications and product details
Extreme compatible 25G-SR-SFP100M Description
EdgeOptic's 25G-SR-SFP100M compatible is an Extreme Networks-coded version of the EdgeOptic 25G-SFP28-100 multi-vendor 25GBASE-SR SFP28 transceiver, a direct replacement for the Extreme Networks 25G-SR-SFP100M. It ships with Extreme-recognized EEPROM so ExtremeXOS Switch Engine platforms identify the optic as a native Extreme part through the standard SFF-8472 vendor read.
Optical behavior is 25GBASE-SR per IEEE 802.3by Clause 112 over duplex multimode fiber: 100 m on OM4 or OM5, 70 m on OM3. Line signaling rate is 25.78125 Gbd, with dual-rate operation down to 10.3125 Gbd for 10GBASE-SR on mixed-speed deployments. TX power −5 dBm minimum and +2.4 dBm maximum from an 850 nm VCSEL, RX sensitivity −10.3 dBm on the PIN photodiode receiver, 5.3 dB link budget with host RS-FEC per IEEE 802.3by Clause 108 RS(528,514). Duplex LC/UPC connector, DOM per SFF-8472, 0.3 W maximum power, 0 to 70 °C commercial operating range.
Extreme Networks pluggable documentation references 25G-SR-SFP100M and 10501 as part numbers for the same physical 25 Gb SR SFP28 module. The two ordering codes are alternate procurement paths in the Extreme catalog; the EdgeOptic compatible matches the Extreme-coded EEPROM for either path. Order against the part number the chassis QuickSpecs or procurement record references to keep ProSupport case keying aligned.
Platform scope is Extreme Networks 25 GbE SFP28-capable switch ports running ExtremeXOS (Switch Engine). Extreme directs static hardware compatibility lookups to the Extreme Optics Compatibility tool at optics.extremenetworks.com rather than publishing per-model HCT entries in the pluggable documentation, so verify the specific Extreme switch model and ExtremeXOS firmware level against the Extreme Optics tool before deployment at scale.
DOM registers for transmit power, receive power, supply voltage, laser bias and module case temperature are exposed through SFF-8472 and surfaced by the ExtremeXOS port-statistics commands and the standard SFP28 SNMP MIBs. The optic meets the 25GBASE-SR optical specification per IEEE 802.3by Clause 112, with host RS-FEC at the MAC layer per IEEE 802.3by Clause 108 where the link partner requires it. SFP28 MSA electrical compliance per SFF-8431, SFF-8432 and SFF-8472.
Backed by 15+ years of EdgeOptic compatibility engineering across vendor optical platforms. Ships next business day from EU stock with a lifetime warranty. For volume pricing, a pre-sales sample on a specific Extreme chassis, or a cross-reference against the 10501 Extreme alternate ordering code, contact our sales team.
Frequently Asked Questions about 25G-SR-SFP100M
What is the relationship between Extreme Networks 25G-SR-SFP100M and 10501?
Extreme Networks official pluggable documentation lists both 25G-SR-SFP100M and 10501 as part numbers for the same physical 25 Gb SR SFP28 module. The two ordering codes route through different procurement paths in the Extreme catalog but refer to one piece of hardware. Engineers receiving a quote that lists one number and a chassis QuickSpecs that references the other can treat them as interchangeable for purposes of optical specification; for asset-management and ProSupport case keying, match the ordering code the procurement record was generated against.
Which Extreme Networks switch platforms accept the 25G-SR-SFP100M?
Extreme Networks does not publish a static switch model list against the 25G-SR-SFP100M part number, and instead directs hardware compatibility lookups to the Extreme Optics Compatibility tool at optics.extremenetworks.com. The transceiver targets 25 GbE SFP28-capable switch ports running ExtremeXOS (Switch Engine). Look up the specific Extreme switch model and ExtremeXOS firmware level in the Extreme Optics tool before deployment at scale.