Finisar FTCD4323E1PCL Compatible 400GBASE-LR4 QSFP-DD Transceiver, 10km
Finisar compatible FTCD4323E1PCL - Key Features
- Compatibility: Finisar
- Media Type: Single-Mode Fiber (SMF)
- Connector: Double LC/UPC
- Fiber Count: Duplex
- Maximum Distance: 10 km
- Average Link Budget: 7.1 dB
- Tx Wavelength: CWDM 4 Ch
- Supported Data Rate: 425 Gbps
- DDM/DOM: Supported
- Forward Error Correction (FEC): Host FEC Supported
- Temperature Range: Standard 0°-70°C
Finisar FTCD4323E1PCL Price
Finisar compatible FTCD4323E1PCL Specifications
Form Factor | QSFP-DD |
Modulation | PAM4 (Pulse Amplitude Modulation 4-level) |
Media Type | Single-Mode Fiber (SMF) |
Connector | Double LC/UPC |
Fiber Count | Duplex |
Maximum Distance | 10 km |
Average Link Budget | 7.1 dB |
TX Wavelength | 4-channel CWDM (1271/1291/1311/1331 nm) |
RX Wavelength | 4-channel CWDM (1271/1291/1311/1331 nm) |
Supported Data Rate | 425 Gbps |
Supported Ethernet Applications | 400G Ethernet (425 Gbps) |
DDM/DOM | Supported |
Forward Error Correction (FEC) | Host FEC Supported |
CDR (Clock and Data Recovery) chip | Supported |
Transmitter Type | EML Laser |
Tx Wave Bandwidth | 73 nm (1264.50–1337.50 nm) |
Average Launch Power (Min) Each Lane | -2.8 dBm |
Average Launch Power (Max) Each Lane | 4 dBm |
Extinction Ratio (Min) | 3.5 dB |
Receiver Type | PIN photodiode |
RX Wave Bandwidth | 73 nm (1264.50–1337.50 nm) |
Average Receiver Sensitivity (Min) Each Lane | -9.1 dBm |
Average Receiver Sensitivity (Max) Each Lane | 4 dBm |
Receiver Overload | 4.5 dBm |
Temperature Range | Standard 0°-70°C |
Storage Temperature | -40° to 85°C |
Relative Humidity | 5 to 85% |
Power Consumption (Max) | 9 W |
Power | +3.3V single power supply |
Compliance | CE;RoHS;Class 1 FDA and IEC60825-1 Laser Safety Compliant;100G Lambda MSA;400GBASE-LR4;IEEE 802.3bs;CMIS V4.0;QSFP-DD MSA |
Finisar compatible FTCD4323E1PCL Datasheet
v4Complete technical specifications and product details
Finisar compatible FTCD4323E1PCL Description
EdgeOptic's FTCD4323E1PCL compatible is a Finisar-coded version of the EdgeOptic 400G-QSFP-DD-11 multi-vendor 400GBASE-LR4 QSFP-DD transceiver. It carries 400 Gigabit Ethernet over a duplex single-mode fiber pair for reaches up to 10 km, replacing the Finisar FTCD4323E1PCL in 400G data-center and aggregation links. The FTCD4323E1PCL is the first-generation member of the Finisar FTCD4323 LR4 line, with the brand now published under Coherent. EdgeOptic's compatible matches the original optical and electrical specifications.
IEEE 802.3bs defines the 400GbE electrical and rate envelope; the LR4 optical PMD follows the 100G Lambda MSA 400G-LR4-10 specification. The module multiplexes four CWDM optical lanes at 1271, 1291, 1311 and 1331 nm onto a single fiber pair, terminated with a duplex LC/UPC connector. Carrying all four wavelengths over one duplex fiber pair lets the link reuse installed single-mode plant without pulling additional fiber strands. The host side runs eight 50G PAM4 electrical lanes under CMIS 4.0, and host RS(544,514) KP4 forward error correction is required on both ends of the link.
The transmitter uses EML lasers with an average launch power between −2.8 and +4 dBm per lane and a minimum extinction ratio of 3.5 dB. The PIN receiver provides a per-lane sensitivity of −9.1 dBm and an overload point of +4.5 dBm, giving a 7.1 dB average link budget across a 10 km span of G.652 single-mode fiber. Integrated clock and data recovery cleans the signal in both directions, and digital diagnostic monitoring reports temperature, supply voltage, laser bias, and per-lane optical power through the standard CMIS registers.
The module operates over a 0 to 70 °C commercial temperature range and draws up to 9 W. It works on switches and routers that expose a QSFP-DD cage at 400GbE. The optic is 400GbE only and does not carry Fibre Channel, OTN, or SONET traffic. Confirm the cage and host FEC settings against the switch transceiver documentation before deployment, and verify both ends of the link are set to the same FEC mode during commissioning.
Backed by 15+ years of EdgeOptic compatibility engineering across vendor optical platforms, the FTCD4323E1PCL compatible is made to order on a 2-week lead time and ships with a lifetime warranty. For volume pricing or deployment questions, contact our sales team.