Finisar FTLC9552FEPM Compatible 100GBASE-SR4 QSFP28 Transceiver
Finisar compatible FTLC9552FEPM - Key Features
- Compatibility: Finisar
- Media Type: 4 Lanes of Multi-Mode Fiber (MMF)
- Connector: MTP/MPO-12 (UPC)
- Fiber Count: 8 Fibers
- Maximum Distance: 100 m
- Average Link Budget: 1.9 dB
- Tx Wavelength: 850 nm
- Supported Data Rate: 103.125 Gbps
- DDM/DOM: Supported
- Forward Error Correction (FEC): No
- Temperature Range: Standard 0°-70°C
Finisar FTLC9552FEPM Price
In Stock - Ships Next Business DayFinisar compatible FTLC9552FEPM Specifications
Form Factor | QSFP28 |
Modulation | NRZ (Non-Return to Zero) |
Media Type | 4 Lanes of Multi-Mode Fiber (MMF) |
Connector | MTP/MPO-12 (UPC) |
Fiber Count | 8 Fibers |
Maximum Distance | 100 m |
Average Link Budget | 1.9 dB |
TX Wavelength | 850 nm |
RX Wavelength | 4-channel 850 nm |
Supported Data Rate | 103.125 Gbps |
Supported Ethernet Applications | 100G Ethernet (103.125 Gbps) |
DDM/DOM | Supported |
Forward Error Correction (FEC) | No |
Transmitter Type | VSCEL Laser |
Tx Wave Bandwidth | 20 nm (840-860 nm) |
Average Launch Power (Min) Each Lane | 3 dBm |
Average Launch Power (Max) Each Lane | 7.5 dBm |
Extinction Ratio (Min) | 3 dB |
Receiver Type | PIN photodiode |
RX Wave Bandwidth | 20 nm (840-860 nm) |
Average Receiver Sensitivity (Min) Each Lane | -10.3 dBm |
Average Receiver Sensitivity (Max) Each Lane | 2.4 dBm |
Receiver Overload | 3.4 dBm |
Temperature Range | Standard 0°-70°C |
Storage Temperature | -40° to 85°C |
Relative Humidity | 5 to 85% |
Power Consumption (Max) | 3.5 W |
Power | +3.3V single power supply |
Compliance | CE, RoHS, Class 1 FDA and IEC60825-1 Laser Safety Compliant, IEEE 802.3bm, 100GBASE-SR4, QSFP28 MSA, SFF-8636 (Management Interface for 4-lane modules), SFF-8665 |
Finisar compatible FTLC9552FEPM Datasheet
v3Complete technical specifications and product details
Finisar compatible FTLC9552FEPM Description
EdgeOptic's FTLC9552FEPM compatible is a Finisar-coded version of the EdgeOptic 100G-QSFP28-100 multi-vendor QSFP28 transceiver. One physical 100GBASE-SR4 design ships against the EEPROM coding required across the major switch vendors, including the Finisar OEM ordering reference. The module covers 100 Gb Ethernet over four parallel 25 Gb/s lanes on multi-mode fiber to the 100GBASE-SR4 specification.
Optical specifications: 850 nm VCSEL transmitters across four lanes, RX sensitivity better than −10.3 dBm per lane, 1.9 dB average link budget, 100 m reach over OM4 and 70 m over OM3. The line side runs NRZ at an aggregate 103.125 Gb/s with no host FEC required for the SR4 PMD. MTP/MPO-12 UPC connector on the front panel; the transceiver port is female, so the patch cable presents the male pinned ferrule. Use a Type B polarity patch when bridging transceiver to transceiver. DDM/DOM monitoring reports transmit power, receive power and bias current per lane, plus module-level temperature and supply voltage.
Built to the QSFP28 MSA (SFF-8665) and the IEEE 802.3bm Clause 95 100GBASE-SR4 PMD. The module operates over the 0 to 70 °C commercial range at 3.5 W maximum and carries the standard CE / RoHS conformance. EdgeOptic codes the part to match the Finisar OEM module EEPROM, enabling recognition on switching platforms that accept the Finisar ordering code. Verify chassis line card optical compatibility against the relevant vendor compatibility documentation before deployment.
Backed by 15+ years of EdgeOptic compatibility engineering across vendor optical platforms. Ships next business day from EU stock with a lifetime warranty. The same EdgeOptic 100G-QSFP28-100 design ships against multiple vendor codes in the Finisar FTLC955x family, so deployments mixing Finisar-coded variants converge on one universal multi-mode short-reach optic at the EdgeOptic side. For deployment questions, larger quantities or alternate FTLC955x family SKUs, contact our sales team.