FTLC9558REPM-1T Finisar Compatible 100GBASE-SR4 QSFP28 Transceiver

Finisar compatible FTLC9558REPM-1T - Key Features
- Compatibility: Finisar
- Media Type: 4 Lanes of Multi-Mode Fiber (MMF)
- Connector: MTP/MPO-12 (UPC)
- Fiber Count: 8 Fibers
- Maximum Distance: 100 m
- Average Link Budget: 1.9 dB
- Tx Wavelength: 850 nm
- Supported Data Rate: 103.125 Gbps
- DDM/DOM: Supported
- Forward Error Correction (FEC): No
- Temperature Range: Standard 0°-70°C
Finisar FTLC9558REPM-1T Price
Finisar compatible FTLC9558REPM-1T Specifications
Form Factor | QSFP28 |
Modulation | NRZ (Non-Return to Zero) |
Media Type | 4 Lanes of Multi-Mode Fiber (MMF) |
Connector | MTP/MPO-12 (UPC) |
Fiber Count | 8 Fibers |
Maximum Distance | 100 m |
Average Link Budget | 1.9 dB |
TX Wavelength | 850 nm |
RX Wavelength | 4-channel 850 nm |
Supported Data Rate | 103.125 Gbps |
Supported Ethernet Applications | 100G Ethernet (103.125 Gbps) |
DDM/DOM | Supported |
Forward Error Correction (FEC) | No |
Transmitter Type | VSCEL Laser |
Tx Wave Bandwidth | 20 nm (840-860 nm) |
Average Launch Power (Min) Each Lane | 3 dBm |
Average Launch Power (Max) Each Lane | 7.5 dBm |
Extinction Ratio (Min) | 3 dB |
Receiver Type | PIN photodiode |
RX Wave Bandwidth | 20 nm (840-860 nm) |
Average Receiver Sensitivity (Min) Each Lane | -10.3 dBm |
Average Receiver Sensitivity (Max) Each Lane | 2.4 dBm |
Receiver Overload | 3.4 dBm |
Temperature Range | Standard 0°-70°C |
Storage Temperature | -40° to 85°C |
Relative Humidity | 5 to 85% |
Power Consumption (Max) | 3.5 W |
Power | +3.3V single power supply |
Compliance | CE, RoHS, Class 1 FDA and IEC60825-1 Laser Safety Compliant, IEEE 802.3bm, 100GBASE-SR4, QSFP28 MSA, SFF-8636 (Management Interface for 4-lane modules), SFF-8665 |
Finisar compatible FTLC9558REPM-1T Datasheet
v3Complete technical specifications and product details
Finisar compatible FTLC9558REPM-1T Description
EdgeOptic's FTLC9558REPM-1T compatible is a Finisar-coded 100GBASE-SR4 version of the EdgeOptic 100G-QSFP28-100 multi-vendor short-reach transceiver, one universal QSFP28 module coded for a range of switch and router vendors. It carries 100G Ethernet over four parallel 850 nm VCSEL lanes at 25G each across multimode fiber, terminated on an MTP/MPO-12 (UPC) connector using 8 active fibers, 4 transmit and 4 receive. The transceiver port is female (unpinned); the patch cable is the pinned male side, so a transceiver-to-transceiver link uses a male-to-male Type B MPO cable. Reach is 70 m over OM3 and 100 m over OM4, per IEEE 802.3bm Clause 95.
Optical specifications include a 1.9 dB average link budget, receiver sensitivity of −10.3 dBm per lane, and NRZ modulation, with no FEC required at this reach. The transmitter uses 850 nm VCSEL lasers; the receiver is a PIN photodiode. OM4 supports the full 100 m while OM3 is rated to 70 m, with achievable distance depending on patch panels, splices, and connector cleanliness in the installed link. DDM/DOM is supported, so the host can read live optical power, temperature, bias, and voltage. The module operates across the 0°C to 70°C commercial temperature range and is compliant with the QSFP28 MSA and SFF-8665. This is a 100G Ethernet short-reach optic; it does not carry Fibre Channel, OTN, or SONET traffic.
The -1T suffix is Finisar's TAA-compliant ordering code for US Government and federal procurement; it is optically and electrically the same Gen3 100GBASE-SR4 optic as the standard FTLC9558REPM. EdgeOptic codes this compatible with Finisar-recognized EEPROM, so it presents as the original module on host platforms that accept Finisar-coded optics; confirm the specific switch model and line card against the vendor transceiver compatibility matrix before deployment. For procurement that requires a TAA-designated build, our sales team can advise on the available ordering options. Typical roles include data center core interconnects, ISP aggregation, and mobile operator core networks.
Backed by 15+ years of EdgeOptic compatibility engineering across vendor optical platforms. Ships next business day from EU stock with a lifetime warranty. For project pricing or technical consultation, contact our sales team.
Frequently Asked Questions
What is the difference between FTLC9558REPM and FTLC9558REPM-1T?
They are the same Gen3 100GBASE-SR4 optic. The -1T suffix is Finisar's TAA-compliant ordering code for US Government and federal procurement, while the standard FTLC9558REPM carries no TAA marking. The EdgeOptic compatible covers the 100GBASE-SR4 application; for procurement that requires a TAA-designated build, contact our sales team.