Finisar compatible FTLF8524P3BNL 3.7 Gb/s RoHS Compliant Short-Wavelength SFP Transceiver

Our Compatible FTLF8524P3BNL Finisar SFP+ transceiver is based on our 10GFH-SFP-300I product, which has the same parameters and is manufactured in accordance with the same industry standards as its OEM counterpart. Our compatible module version is designed for operation over a Double Fiber Multi-Mode Fiber (MMF) optical cable. It has a minimum guaranteed optical budget of 4.6 dB, which typically is enough to reach about 300 meters over OM3 type fiber or 400 meters using higher category MMF fiber such as OM4 or OM5. However, distance is only an indicative parameter calculated for identification comfort. Finally, we calculate distance while keeping in mind the minimum (guaranteed) optical budget and the average attenuation of optical cabling in the industry. Our FTLF8524P3BNL Finisar compatible transceiver uses a high-quality VSCEL Laser transmitter operating at 850 nm nominal wavelength and a 850 nm PIN Photodiode receiver. This module supports DDM/DOM optical diagnostics and provides diagnostic data about the current operating conditions. This compatible module has a Double LC connector and module is designed for operation in industrial temperature networking environments ranging from -40° to 85°C. The transceiver chipset supports data rates ranging from 1.22-10.1376 Gbps and such applications as CPRI option 2 (1228.8 Mbps), CPRI option 3 (2.458 Gbps), CPRI option 5 (4.915 Gbps), CPRI option 6 (6.144 Gbps), CPRI option 7 (9.830 Gbps), CPRI option 8 (10.138 Gbps), OBSAI RP3 x 2 (1.536 Gbps), OBSAI RP3 x 4 (3.072 Gbps), OBSAI RP3 x 8 (6.144 Gbps). It is important to note that the mentioned application support will vary depending on the port where the module will be used, and it supported applications as well as module speed configuration during ordering process, but we can ensure that our module will support at least the same functionality as its OEM counterpart. This is a multi-purpose transceiver that can be used in a variety of different places in today's networking. As a result, Mobile Operator Fronthaul Network connections are the most popular applications for this product.

Our compatible FTLF8524P3BNL Finisar module is CE/RoHS certified, it meets product safety standards, and is compliant with SFP+ Multi Source Agreement (MSA) SFF-8432 industry standard. To ensure smooth operation, we have completed compatibility tests for this module with the most recent platforms of Finisar networking equipment, allowing us to encode transceiver EEPROM memory to be compatible with and work seamlessly in Finisar platforms. We are committed to quality, therefore before delivering our products, we conduct stringent quality inspections that include optical parameter measurements, connector cleanliness tests, and EEPROM memory data validation tests. If you have any questions, please Contact us. We will gladly learn about your needs and recommend the best compatible products from our portfolio.