FTLX1671D3BCL Finisar Compatible 10GBASE-ER SFP+ Transceiver
Finisar compatible FTLX1671D3BCL - Key Features
- Compatibility: Finisar
- Media Type: Single-Mode Fiber (SMF)
- Fiber Count: Duplex
- Connector: Double LC/UPC
- Maximum Distance: 40 km
- Average Link Budget: 15 dB
- Tx Wavelength: 1550 nm
- Supported Data Rate: 1.25 Gbps - 11.32 Gbps
- DDM/DOM: Supported
- Temperature Range: Standard 0°-70°C
Finisar FTLX1671D3BCL Price
Finisar compatible FTLX1671D3BCL Specifications
Form Factor | SFP+ |
Media Type | Single-Mode Fiber (SMF) |
Fiber Count | Duplex |
Connector | Double LC/UPC |
Maximum Distance | 40 km |
Average Link Budget | 15 dB |
TX Wavelength | 1550 nm |
RX Wavelength | 1550 nm |
Supported Data Rate | 1.25 Gbps - 11.32 Gbps |
Supported Ethernet Applications | 10G Ethernet (10.31Gbps), Gigabit Ethernet (1.25 Gbps) |
Supported Fiber Channel Applications | 10G Fiber Channel (10.52 Gbps), 1G Fiber Channel (1.0625 Gbps), 2G Fiber Channel (2.125 Gbps), 4G Fiber Channel (4.25 Gbps), 8G Fiber Channel (8.5 Gbps) |
SDH/SONET Standards | STM-64 (9.95Gbps) |
DDM/DOM | Supported |
Tx Wavelength Bandwidth | 37 nm (1528-1565 nm) |
Rx Wavelength Bandwidth | 37 nm (1528-1565 nm) |
Minimum Transmitting Power | -1 dBm |
Maximum Transmitting Power | 4 dBm |
Receiver Sensitivity | -16 dBm |
Receiver Overload | 0 dBm |
Dispersion | 800-1000 ps/nm |
Transmitter Type | DFB Laser |
Receiver Type | PIN photodiode |
Temperature Range | Standard 0°-70°C |
Power | +3.3V single power supply |
Compliance | CE,Class 1 FDA and IEC60825-1 Laser Safety Compliant,RoHS,SFF-8431,SFP MSA |
Finisar compatible FTLX1671D3BCL Datasheet
v4Complete technical specifications and product details
Finisar compatible FTLX1671D3BCL Description
EdgeOptic's FTLX1671D3BCL compatible is a Finisar-coded 10GBASE-ER version of the EdgeOptic 10G-SFP-40 multi-vendor 10GBASE-ER SFP+ transceiver. One universal 10G-SFP-40 design is programmed for multiple vendor codes, and this build carries Finisar-recognized EEPROM coding so the host reads it as the original part. It matches the original module's optical and electrical specifications and drops into the same single-mode fiber links without configuration changes.
The module runs at 1550 nm over duplex single-mode fiber and reaches 40 km. It has a 15 dB link budget, with transmit power held between −1 and +4 dBm and receiver sensitivity of −16 dBm. Receiver overload is 0 dBm, so a short loopback or a span shorter than the design distance will not saturate the receiver. Chromatic dispersion tolerance covers the 800 to 1000 ps/nm range expected on a 40 km extended-reach span. The duplex LC/UPC connector pair mates with standard SMF patch cords.
Digital optical monitoring reports module temperature, supply voltage, laser bias current, transmit optical power, and receive optical power in real time through the standard two-wire serial interface. Operations teams use those readings for link commissioning and fault isolation, confirming optical margin at turn-up and narrowing down a degraded span without pulling the module. The transceiver runs on a single +3.3 V supply and is rated for the commercial temperature range of 0 to 70 °C.
The FTLX1671D3BCL compatible carries 10 Gigabit Ethernet and 1 Gigabit Ethernet traffic and supports OC-192/STM-64 SONET/SDH and Fibre Channel at 1, 2, 4, 8, and 10 Gigabit rates. The 40 km extended reach suits single-mode applications such as data-center interconnect, metro and carrier-access transport, and building-to-building backbone links. The module is CE marked and RoHS compliant, meets the SFF-8431 SFP+ electrical interface, follows the SFP MSA mechanical form factor, and is a Class 1 laser product per IEC 60825-1.
Backed by 15+ years of EdgeOptic compatibility engineering across vendor optical platforms, every unit carries an EEPROM profile matching the original Finisar identifier, so the host platform reads it as the original part. It ships next business day from EU stock with a lifetime warranty. For project-specific questions or volume pricing, contact our sales team.