Fortinet FS-TRAN-SFP+ER Compatible 10GBASE-ER SFP+ 40km
Fortinet compatible FS-TRAN-SFP+ER - Key Features
- Compatibility: Fortinet
- Media Type: Single-Mode Fiber (SMF)
- Fiber Count: Duplex
- Connector: Double LC/UPC
- Maximum Distance: 40 km
- Average Link Budget: 15 dB
- Tx Wavelength: 1550 nm
- Supported Data Rate: 1.25 Gbps - 11.32 Gbps
- DDM/DOM: Supported
- Temperature Range: Standard 0°-70°C
Fortinet FS-TRAN-SFP+ER Price
Fortinet compatible FS-TRAN-SFP+ER Specifications
Form Factor | SFP+ |
Media Type | Single-Mode Fiber (SMF) |
Fiber Count | Duplex |
Connector | Double LC/UPC |
Maximum Distance | 40 km |
Average Link Budget | 15 dB |
TX Wavelength | 1550 nm |
RX Wavelength | 1550 nm |
Supported Data Rate | 1.25 Gbps - 11.32 Gbps |
Supported Ethernet Applications | 10G Ethernet (10.31Gbps), Gigabit Ethernet (1.25 Gbps) |
Supported Fiber Channel Applications | 10G Fiber Channel (10.52 Gbps), 1G Fiber Channel (1.0625 Gbps), 2G Fiber Channel (2.125 Gbps), 4G Fiber Channel (4.25 Gbps), 8G Fiber Channel (8.5 Gbps) |
SDH/SONET Standards | STM-64 (9.95Gbps) |
DDM/DOM | Supported |
Tx Wavelength Bandwidth | 37 nm (1528-1565 nm) |
Rx Wavelength Bandwidth | 37 nm (1528-1565 nm) |
Minimum Transmitting Power | -1 dBm |
Maximum Transmitting Power | 4 dBm |
Receiver Sensitivity | -16 dBm |
Receiver Overload | 0 dBm |
Dispersion | 800-1000 ps/nm |
Transmitter Type | DFB Laser |
Receiver Type | PIN photodiode |
Temperature Range | Standard 0°-70°C |
Power | +3.3V single power supply |
Compliance | CE,Class 1 FDA and IEC60825-1 Laser Safety Compliant,RoHS,SFF-8431,SFP MSA |
Fortinet compatible FS-TRAN-SFP+ER Datasheet
v4Complete technical specifications and product details
Fortinet compatible FS-TRAN-SFP+ER Description
EdgeOptic's FS-TRAN-SFP+ER compatible is a Fortinet-coded version of the EdgeOptic 10G-SFP-40 multi-vendor 10GBASE-ER SFP+ transceiver. It runs 10 Gigabit Ethernet to IEEE 802.3ae over a duplex single-mode fiber pair, with the EEPROM programmed so FortiOS reads the module as a recognized transceiver.
The optical interface uses a 1550 nm DFB laser transmitter and a PIN photodiode receiver. Transmit power runs from −1 dBm to +4 dBm, receiver sensitivity is better than −16 dBm, and receiver overload is 0 dBm, which gives a 15 dB link budget for reach to 40 km over single-mode fiber. The module carries an LC duplex connector and operates across the 0 to 70 °C commercial temperature range on a +3.3 V supply. Distance is an indicative figure derived from the link budget and typical cable attenuation, so the achievable span depends on the fiber plant, splice loss, and connector count on the route.
Built to the SFP+ form factor, the module follows the SFF-8431 host electrical specification and reports digital diagnostic monitoring per SFF-8472, so transmit power, receive power, laser bias, temperature, and supply voltage are readable from the host. On Fortinet platforms the module serves 10 Gigabit Ethernet uplinks and inter-site links. FortiGate firewalls and FortiSwitch switches are Ethernet and IP devices, so the part operates as a 10GE optic in those deployments. Confirm the part is listed for the specific FortiGate or FortiSwitch model and FortiOS version against Fortinet's transceiver compatibility documentation before deployment.
Common deployments include firewall and switch uplinks, campus and data center site interconnect, and provider aggregation links where a 40 km ER span is needed. The module is CE marked, Class 1 laser rated to IEC 60825-1 and FDA standards, and RoHS compliant.
Backed by 15+ years of EdgeOptic compatibility engineering across vendor optical platforms, the FS-TRAN-SFP+ER compatible ships next business day from EU stock with a lifetime warranty. For platform verification or volume requirements, contact our sales team.
Frequently Asked Questions
What is the difference between FS-TRAN-SFP+ER and FN-TRAN-SFP+ER on Fortinet platforms?
FS-TRAN-SFP+ER and FN-TRAN-SFP+ER are both Fortinet ordering codes for the 10GBASE-ER 1550 nm 40 km SFP+ class. The codes carry platform-specific EEPROM data, so platforms expect the specific prefix they were qualified with. Order the code your FortiSwitch or FortiGate model and FortiOS version expect, and verify it against Fortinet's transceiver compatibility documentation before swapping one prefix for the other.
Will the FS-TRAN-SFP+ER compatible register on FortiSwitch without a compatibility warning?
EdgeOptic codes the EEPROM for FS-TRAN recognition so the module presents the identity FortiOS expects on a FortiSwitch SFP+ port. Whether a given FortiSwitch model accepts the optic without a warning still depends on Fortinet's compatibility table for that model and FortiOS release, so verify the part against Fortinet's transceiver documentation for your switch before deployment.