Hisense Broadband LTF8502-BH+ Compatible 10G 300M MMF SFP+ module
Hisense Broadband compatible LTF8502-BH+ - Key Features
- Compatibility: Hisense Broadband
- Media Type: Multi-Mode Fiber (MMF) -OM3/OM4/OM5
- Fiber Count: Duplex
- Connector: Double LC/UPC
- Maximum Distance: 300 m
- Average Link Budget: 5.1 dB
- Tx Wavelength: 850 nm
- Supported Data Rate: 1.228 Gbps - 10.138 Gbps
- DDM/DOM: Supported
- Temperature Range: Industrial -45°C - +85°C
Hisense Broadband LTF8502-BH+ Price
Hisense Broadband compatible LTF8502-BH+ Specifications
Form Factor | SFP+ |
Media Type | Multi-Mode Fiber (MMF) -OM3/OM4/OM5 |
Fiber Count | Duplex |
Connector | Double LC/UPC |
Maximum Distance | 300 m |
Average Link Budget | 5.1 dB |
TX Wavelength | 850nm |
RX Wavelength | 850nm |
Supported Data Rate | 1.228 Gbps - 10.138 Gbps |
Supported Front Haul Applications | CPRI option 2 (1228.8 Mbps), CPRI option 3 (2.458 Gbps), CPRI option 5 (4.915 Gbps), CPRI option 6 (6.144 Gbps), CPRI option 7 (9.830 Gbps), CPRI option 8 (10.138 Gbps), OBSAI RP3 x 2 (1.536 Gbps), OBSAI RP3 x 4 (3.072 Gbps), OBSAI RP3 x 8 (6.144 Gbps) |
DDM/DOM | Supported |
Tx Wavelength Bandwidth | 20 nm (840-860 nm) |
Rx Wavelength Bandwidth | 20 nm (840-860 nm) |
Minimum Transmitting Power | -6 dBm |
Maximum Transmitting Power | -1 dBm |
Receiver Sensitivity | -11.1 dBm |
Receiver Overload | 0 dBm |
Dispersion | 110 ps/nm ps/nm |
Transmitter Type | VCSEL Laser |
Receiver Type | PIN photodiode |
Temperature Range | Industrial -45°C - +85°C |
Power | +3.3V single power supply |
Compliance | CE, Class 1 FDA and IEC60825-1 Laser Safety Compliant, RoHS, SFF-8431, SFP MSA |
Hisense Broadband compatible LTF8502-BH+ Datasheet
v2Complete technical specifications and product details
Hisense Broadband compatible LTF8502-BH+ Description
EdgeOptic's LTF8502-BH+ compatible is a Hisense Broadband-coded industrial-temperature version of the EdgeOptic 10GFH-SFP-300I multi-vendor 10G fronthaul SR transceiver. The LTF8502-BH+ is the I-temp member of Hisense's LTF8502 SFP+ family, distinct from the commercial-temperature LTF8502-BC+, for short-reach multimode links in mobile fronthaul and industrial environments. The single compatible design carries multiple vendor codes, so the same optical hardware drops into Hisense-specified links under the BH+ part number.
The module transmits at 850 nm over duplex multimode fiber using a VCSEL laser and a PIN photodiode receiver. It reaches 300 m over OM3 and farther over OM4 or OM5, with a 5.1 dB optical path loss budget and chromatic dispersion of 110 ps/nm. TX output power runs from −6 to −1 dBm, RX sensitivity is −11.1 dBm, and RX overload is 0 dBm. The module runs from a single +3.3V supply and uses an LC duplex receptacle.
As a multi-rate optic it carries line rates from 1.228 to 10.138 Gbps, covering CPRI and OBSAI mobile-fronthaul protocols as well as 10G Ethernet SR. That range lets one part serve the baseband-to-radio links and the 10G Ethernet aggregation that share a cell site or industrial cabinet, rather than stocking separate optics for each role.
Rated to the industrial −45 to +85°C temperature class, the BH+ designation marks it as the wide-temperature variant for outdoor radio sites and remote radio head links, whereas the BC+ variant is specified for 0 to +70°C commercial use. That difference matters when the optic sits in an unconditioned outdoor enclosure that swings well below freezing or above commercial limits. The compatible supports digital diagnostics monitoring (DOM) for real-time readout of transmit power, receive power, laser bias, supply voltage and module temperature, which helps with commissioning and link troubleshooting. It conforms to SFF-8431 and the SFP+ MSA. Confirm the temperature rating needed for the deployment before ordering.
Backed by 15+ years of EdgeOptic compatibility engineering across vendor optical platforms. This module is made to order with a 2-week lead time and ships with a lifetime warranty. For volume pricing or deployment questions, contact our sales team.