JD094A HPE compatible 10G SFP+ 1310nm 10km SMF module

JD094A is HP’s part number for a 10GBASE-LR SFP+ transceiver in the X130 series, intended for H3C and Comware-based platforms. EdgeOptic’s compatible replacement is built on our 10G-SFP-10 platform and ships with HP-recognized EEPROM coding, so H3C switches accept it without vendor lock-in warnings. The module is a direct functional replacement for the original HP optic across the entire H3C FlexNetwork and FlexFabric switching portfolio.

Optical parameters follow the 10GBASE-LR specification: 1310 nm DFB laser transmitter, PIN photodiode receiver, with reach up to 10 km over G.652 single-mode fiber using duplex LC/UPC connectors. The module supports data rates up to 10.3125 Gbps and meets IEEE 802.3ae, SFF-8431, SFF-8432, and SFF-8472 for digital diagnostics monitoring. Maximum channel insertion loss is approximately 6.3 dB, consistent with the 10GBASE-LR link budget. Commercial operating temperature range is 0°C to 70°C, covering standard data center and wiring closet environments.

JD094A belongs to HP’s A-MSA optics series and appears frequently in FlexNetwork and FlexFabric switch deployments. The part number is the older ordering code; JD094B is the updated variant that HP introduced as a direct replacement. Both share identical optical and electrical specifications, and the only change between revisions is the part number itself. EdgeOptic codes the JD094A and JD094B as separate compatible SKUs, each with the correct EEPROM profile for the respective HP part number. When ordering, match the part number printed on the original module or listed in the switch’s transceiver compatibility matrix to avoid any inventory confusion.

Typical deployment scenarios include 10 GbE uplinks on the HP A5820, A5800, and 5900 series switches, as well as H3C S5800 and S9500E chassis. The JD094A is also referenced in older HP IRF (Intelligent Resilient Framework) stack configurations where 10G SFP+ inter-switch links run over single-mode fiber between floors or buildings. In campus network designs, the JD094A’s 10 km reach provides enough distance for fiber runs across a multi-building campus without requiring intermediate repeaters or media converters.

EdgeOptic backs this compatible with a lifetime warranty and full DDM reporting, including real-time monitoring of temperature, supply voltage, Tx optical power, Rx optical power, and laser bias current. These DDM values are accessible through the Comware CLI (“display transceiver” command) and SNMP polling. For questions about platform compatibility or bulk pricing, contact our sales team