JL250A HPE Aruba Compatible Tunable 10G DWDM SFP+ 80 km
HP compatible JL250A - Key Features
- Compatibility: HP
- Media Type: Single-Mode Fiber (SMF)
- Fiber Count: Duplex
- Connector: Double LC/UPC
- Maximum Distance: 80 km
- Average Link Budget: 23 dB
- Tx Wavelength: DWDM 89 Ch (C-band 50Ghz)
- Supported Data Rate: 1.25 Gbps - 11.32 Gbps
- DDM/DOM: Supported
- Temperature Range: Standard 0°-70°C
HP JL250A Price
HP compatible JL250A Specifications
Form Factor | SFP+ |
Media Type | Single-Mode Fiber (SMF) |
Fiber Count | Duplex |
Connector | Double LC/UPC |
Maximum Distance | 80 km |
Average Link Budget | 23 dB |
TX Wavelength | Channel 17-61 (DWDM C-Band 50 GHz, 89 channels) |
RX Wavelength | Channel 17-61 (DWDM, C-Band 50 GHz) |
Supported Data Rate | 1.25 Gbps - 11.32 Gbps |
Supported Ethernet Applications | 10G Ethernet (10.31Gbps) |
Supported Fiber Channel Applications | 10G Fiber Channel (10.52 Gbps), 8G Fiber Channel (8.5 Gbps) |
Optical Transport Network (OTN) Applications | ODU2 (10.037Gbps), ODU2e (10.399Gbps), OTU1e (11.049Gbps), OTU1f (11.27Gbps), OTU2 (10.70Gbps), OTU2e (11.095Gbps), OTU2f (11.32Gbps) |
SDH/SONET Standards | STM-64 (9.95Gbps) |
DDM/DOM | Supported |
Tx Wavelength Bandwidth | ITU 50Ghz Grid: C-Band (Ch17-61) |
Rx Wavelength Bandwidth | 1260 - 1620 nm |
Minimum Transmitting Power | -1 dBm |
Maximum Transmitting Power | 4 dBm |
Receiver Sensitivity | -23 dBm |
Receiver Overload | -6 dBm |
Dispersion | 1600 ps/nm |
Transmitter Type | Monolithic MZM Tunable TOSA |
Receiver Type | APD Photodiode |
Temperature Range | Standard 0°-70°C |
Power | +3.3V single power supply |
Compliance | CE,Class 1 FDA and IEC60825-1 Laser Safety Compliant,RoHS,SFF-8431,SFP MSA |
HP compatible JL250A Datasheet
v4Complete technical specifications and product details
HP compatible JL250A Description
EdgeOptic's JL250A compatible is an HPE Aruba coded tunable 10G DWDM SFP+, the third-party equivalent of the HPE X130 10G SFP+ LC LH80 tunable transceiver. The module is built to the SFP+ MSA (SFF-8431) and ships with HPE-recognized vendor identity for both Comware-based FlexFabric and FlexNetwork hosts and Aruba AOS-S switches, so the chassis identifies the optic correctly during the built-in transceiver check.
Optical and electrical specifications: tunable across the ITU 50 GHz C-Band grid (Channels 17 to 61, 1528.38 to 1564.68 nm, 89 channels) with integrated wavelength locker. Reach 80 km over G.652 duplex SMF with a 23 dB optical link budget. Launch power −1 to +4 dBm. RX sensitivity better than −23 dBm. RX overload −6 dBm. Dispersion tolerance 1600 ps/nm. Data rate range 8.5 to 11.32 Gb/s, supporting 10G Ethernet (LAN-PHY) and STM-64/OC-192 SDH applications. Operating case temperature 0 to 70 °C. Duplex LC connector, full DOM/DDM telemetry per SFF-8472, CE and RoHS certified, Class 1 laser per IEC 60825-1.
Host platform compatibility: documented HPE platforms include the FlexFabric 5900 and 5940 switch series, broader Comware-based FlexFabric and FlexNetwork lines, and the Aruba AOS-S families (2930F, 2930M, 3810M, 5400R). Comware platforms accept the module natively once the EEPROM presents HPE identity. AOS-S switches require a global allow-unsupported-transceiver command before a third-party DWDM SFP+ will pass the platform check (see the HPE AOS-S and AOS-CX Transceiver Guide at arubanetworking.hpe.com for the exact command syntax and minimum firmware version for your switch model); Comware platforms do not require this command. Verify against the HPE Comware Transceiver User Guide or the AOS-S and AOS-CX Transceiver Guide for the specific switch model and firmware before ordering.
Backed by 15+ years of EdgeOptic compatibility engineering across vendor optical platforms. Made to order with a 2-week lead time and a lifetime warranty included. For channel-plan provisioning, AOS-S deployment guidance, or volume quoting, contact our sales team.
Frequently Asked Questions
Does the JL250A compatible need the allow-unsupported-transceiver command on HPE Aruba AOS-S switches?
Yes for AOS-S, no for Comware. AOS-S switches (2930F, 2930M, 3810M, 5400R running supported AOS-S releases) gate non-HPE-branded SFP+ modules behind a global allow-unsupported-transceiver command, applied in global configuration mode. Verify the exact command syntax and minimum firmware version against the HPE AOS-S Transceiver Guide at arubanetworking.hpe.com for your switch model. Comware-based FlexFabric and FlexNetwork platforms identify the JL250A natively when the EEPROM presents HPE vendor identity and do not require an allow command. Confirm the exact requirement against the AOS-S or Comware Transceiver Guide for your switch and firmware release.
Which HPE switches support the JL250A tunable DWDM SFP+?
JL250A is the HPE X130 10G SFP+ LC LH80 tunable. It is documented for the HPE Comware-based FlexFabric 5900 and 5940 switch series and broader FlexFabric and FlexNetwork lines, and for the Aruba AOS-S 2930F, 2930M, 3810M, and 5400R families (with the AOS-S allow-unsupported-transceiver command applied per the HPE AOS-S Transceiver Guide). Verify the specific port and line card against the HPE Comware Transceiver User Guide or the AOS-S and AOS-CX Transceiver Guide for your firmware version before deployment.