R1N94A Compatible HPE 100Gb QSFP28 LC LR 10 km Transceiver
HP compatible R1N94A - Key Features
- Compatibility: HP
- Media Type: Single-Mode Fiber (SMF)
- Connector: Double LC/UPC
- Fiber Count: Duplex
- Maximum Distance: 10 km
- Average Link Budget: 6.3 dB
- Tx Wavelength: 1310 nm
- Supported Data Rate: 112 Gbps
- DDM/DOM: Supported
- Forward Error Correction (FEC): Host FEC Supported
- Temperature Range: Standard 0°-70°C
HP R1N94A Price
In Stock - Ships Next Business DayHP compatible R1N94A Specifications
Form Factor | QSFP28 |
Modulation | NRZ (Non-Return to Zero) |
Media Type | Single-Mode Fiber (SMF) |
Connector | Double LC/UPC |
Fiber Count | Duplex |
Maximum Distance | 10 km |
Average Link Budget | 6.3 dB |
TX Wavelength | 4-channel LAN WDM (1295.56/1300.05/1304.58/1309.14 nm) |
RX Wavelength | 4-channel LAN WDM (1295.56/1300.05/1304.58/1309.14 nm) |
Supported Data Rate | 112 Gbps |
Supported Ethernet Applications | 100G Ethernet (103.125 Gbps) |
Optical Transport Network (OTN) Applications | OTU4 (112 Gbps) |
DDM/DOM | Supported |
Forward Error Correction (FEC) | Host FEC Supported |
Transmitter Type | EML Laser |
Tx Wave Bandwidth | 4 LAN WDM Seperated 1310 nm Lanes (15.66 nm 1294.53 – 1310.19nm) (L0 Tx center 1295.56nm, L1 Tx center 1300.05nm, L2 Tx center 1304.58nm, L3 Tx center 1309.14nm) |
Average Launch Power (Min) Each Lane | -4.3 dBm |
Average Launch Power (Max) Each Lane | 4.5 dBm |
Extinction Ratio (Min) | 4 dB |
Receiver Type | PIN photodiode |
RX Wave Bandwidth | 4 LAN WDM Seperated 1310 nm Lanes (15.66 nm 1294.53 – 1310.19nm) (L0 Tx center 1295.56nm, L1 Tx center 1300.05nm, L2 Tx center 1304.58nm, L3 Tx center 1309.14nm) |
Average Receiver Sensitivity (Min) Each Lane | -10.6 dBm |
Average Receiver Sensitivity (Max) Each Lane | -8.6 dBm |
Receiver Overload | 5.5 dBm |
Temperature Range | Standard 0°-70°C |
Storage Temperature | -40° to 85°C |
Relative Humidity | 5 to 85% |
Power Consumption (Max) | 3.5 W |
Power | +3.3V single power supply |
Compliance | CE, RoHS, Class 1 FDA and IEC60825-1 Laser Safety Compliant, IEEE 802.3ba, IEEE 802.3bm, 100GBASE-LR4, QSFP28 MSA, SFF-8636 (Management Interface for 4-lane modules), SFF-8665 |
HP compatible R1N94A Datasheet
v3Complete technical specifications and product details
HP compatible R1N94A Description
EdgeOptic's R1N94A compatible is an HPE-coded 100GBASE-LR4 QSFP28 transceiver built on the EdgeOptic 100G-QSFP28-10 platform. R1N94A is HPE's ordering code for the HPE 100Gb QSFP28 LC LR 10km Transceiver, positioned under the HPE Composable Fabric product line. The EdgeOptic compatible carries HPE-recognized EEPROM identifiers so the host switch surfaces the expected R1N94A ordering code in CLI and management telemetry, and it ships with the same wavelength plan, electrical interface, and SFF-8636 management profile as the OEM module. The module slots into a standard QSFP28 cage and follows the same insertion, hot-swap, and DDM behavior as HPE's original part.
The optical interface follows IEEE 802.3ba Clause 88 100GBASE-LR4. Four 25.78 Gbps NRZ lanes ride the LAN WDM grid at 1295.56, 1300.05, 1304.58, and 1309.14 nm, then multiplex onto a single LC duplex pair of single-mode fiber. The 6.3 dB optical path loss budget supports a full 10 km reach on G.652 SMF. Host electrical interface is CAUI-4 per IEEE 802.3bm. Power dissipation stays at 3.5 W on a single 3.3 V supply, the operating temperature window is 0 to 70 C commercial, and the module reports DDM telemetry per SFF-8636 for tx power, rx power, bias current, supply voltage, and case temperature.
R1N94A belongs to the HPE Composable Fabric product line, which uses QSFP28 ports on FM-series switching infrastructure. It is not part of the HPE Aruba CX switching family, where transceivers are ordered under JL-series part numbers such as JL275A and JL310A. Engineers ordering replacement optics for an Aruba CX chassis should specify the JL-series part listed in the chassis transceiver table; engineers ordering for HPE Composable Fabric switching should use the R1N94A ordering reference. EdgeOptic's compatible matches the original optical and electrical specifications and carries the R1N94A ordering code so procurement records and chassis inventory output stay consistent with HPE's part numbering. The compatible carries Class 1 laser safety classification, RoHS compliance, and CE marking.
Compatible with HPE Composable Fabric switching infrastructure that accepts third-party QSFP28 LR4 optics; verify the entry for your specific switch model in the HPE transceiver compatibility table before deployment. Ships next business day from EU stock with a lifetime warranty. Backed by 15+ years of EdgeOptic compatibility engineering across vendor optical platforms. For volume orders, custom EEPROM programming, or pre-sales engineering questions, contact our sales team.