OSX040N01 (02310CNF) Huawei Compatible 10GBASE-ER SFP+
Huawei compatible OSX040N01 - Key Features
- Compatibility: Huawei
- Media Type: Single-Mode Fiber (SMF)
- Fiber Count: Duplex
- Connector: Double LC/UPC
- Maximum Distance: 40 km
- Average Link Budget: 15 dB
- Tx Wavelength: 1550 nm
- Supported Data Rate: 1.25 Gbps - 11.32 Gbps
- DDM/DOM: Supported
- Temperature Range: Standard 0°-70°C
Huawei OSX040N01 Price
Huawei compatible OSX040N01 Specifications
Form Factor | SFP+ |
Media Type | Single-Mode Fiber (SMF) |
Fiber Count | Duplex |
Connector | Double LC/UPC |
Maximum Distance | 40 km |
Average Link Budget | 15 dB |
TX Wavelength | 1550 nm |
RX Wavelength | 1550 nm |
Supported Data Rate | 1.25 Gbps - 11.32 Gbps |
Supported Ethernet Applications | 10G Ethernet (10.31Gbps), Gigabit Ethernet (1.25 Gbps) |
Supported Fiber Channel Applications | 10G Fiber Channel (10.52 Gbps), 1G Fiber Channel (1.0625 Gbps), 2G Fiber Channel (2.125 Gbps), 4G Fiber Channel (4.25 Gbps), 8G Fiber Channel (8.5 Gbps) |
SDH/SONET Standards | STM-64 (9.95Gbps) |
DDM/DOM | Supported |
Tx Wavelength Bandwidth | 37 nm (1528-1565 nm) |
Rx Wavelength Bandwidth | 37 nm (1528-1565 nm) |
Minimum Transmitting Power | -1 dBm |
Maximum Transmitting Power | 4 dBm |
Receiver Sensitivity | -16 dBm |
Receiver Overload | 0 dBm |
Dispersion | 800-1000 ps/nm |
Transmitter Type | DFB Laser |
Receiver Type | PIN photodiode |
Temperature Range | Standard 0°-70°C |
Power | +3.3V single power supply |
Compliance | CE,Class 1 FDA and IEC60825-1 Laser Safety Compliant,RoHS,SFF-8431,SFP MSA |
Huawei compatible OSX040N01 Datasheet
v4Complete technical specifications and product details
Huawei compatible OSX040N01 Description
EdgeOptic's OSX040N01 compatible is a Huawei-coded version of the EdgeOptic 10G-SFP-40 multi-vendor 10GBASE-ER SFP+ transceiver. It carries the Huawei part numbers OSX040N01 and 02310CNF, and the EEPROM is programmed so Huawei switches read it as the matching optical module. One universal 10G-SFP-40 part covers multiple vendor codes; this listing is the Huawei build of it.
The module transmits at a nominal 1550 nm over duplex single-mode fiber and reaches 40 km on a 15 dB link budget. Transmit power runs from −1 to +4 dBm, receiver sensitivity is rated at −16 dBm, and receiver overload is 0 dBm. A PIN photodiode handles the receive path. The optical interface is a duplex LC/UPC connector and the module runs on +3.3 V across the 0 to 70 °C commercial temperature range. Digital optical monitoring reports temperature, supply voltage, laser bias, transmit power, and receive power in real time.
This is a multi-rate SFP+ built for 10G Ethernet and Gigabit Ethernet links. On 10GBASE-ER it carries a full-rate 10G Ethernet payload across a 40 km single-mode span, and it also supports Gigabit Ethernet on the same fiber plant. It is electrically compliant with SFF-8431 for the SFP+ host interface and follows the SFP MSA mechanical form factor, so it seats and registers the same way the original Huawei optic does. The module is RoHS compliant and CE marked, and the transmit laser meets Class 1 laser safety under IEC 60825-1.
OSX040N01 is documented for Huawei CloudEngine and S-series switches, where it serves 10G Ethernet uplink and aggregation ports. The 40 km reach suits campus and metro Ethernet aggregation, building-to-building backbone links, and data center interconnect across single-mode fiber spans. Before deployment, verify the part against your platform's hardware description or transceiver compatibility list to confirm the optical module is supported on the port and software release you are running. The 02310CNF ordering code identifies the build covered by this page.
Backed by 15+ years of EdgeOptic compatibility engineering across vendor optical platforms, the OSX040N01 compatible ships next business day from EU stock with a lifetime warranty. For volume pricing or help matching the module to a specific Huawei platform, contact our sales team.
Frequently Asked Questions
Will a Huawei CloudEngine or S-series switch raise an alarm when an OSX040N01 compatible module is inserted?
Huawei CloudEngine and S-series switches generate an informational alarm by default when they detect an optical module that is not Huawei-certified. The alarm is cosmetic; the link still negotiates and passes traffic normally, and digital optical monitoring continues to report correctly. If you prefer to clear the message from the log, Huawei provides an alarm-disable command for non-certified optical modules in the platform's configuration guide. The exact syntax differs between CloudEngine and S-series releases, so check the configuration guide for your switch model and software version and apply the command Huawei documents there.