QSFP28-100G-DR (02312VSP) Huawei Compatible 100GBASE-DR 500m QSFP28 Module
Huawei compatible QSFP28-100G-DR - Key Features
- Compatibility: Huawei
- Media Type: Single-Mode Fiber (SMF)
- Connector: Double LC/UPC
- Fiber Count: Duplex
- Maximum Distance: 500 m
- Average Link Budget: 3 dB
- Tx Wavelength: 1310 nm
- Supported Data Rate: 106.25 Gbps
- DDM/DOM: Supported
- Forward Error Correction (FEC): Host FEC Supported
- Temperature Range: Standard 0°-70°C
Huawei QSFP28-100G-DR Price
Huawei compatible QSFP28-100G-DR Specifications
Form Factor | QSFP28 |
Modulation | PAM4 (Pulse Amplitude Modulation 4-level) |
Media Type | Single-Mode Fiber (SMF) |
Connector | Double LC/UPC |
Fiber Count | Duplex |
Maximum Distance | 500 m |
Average Link Budget | 3 dB |
TX Wavelength | 1310 nm |
RX Wavelength | 1310 nm |
Supported Data Rate | 106.25 Gbps |
Supported Ethernet Applications | 100G Ethernet PAM4 (106.25 Gbps) |
DDM/DOM | Supported |
Forward Error Correction (FEC) | Host FEC Supported |
CDR (Clock and Data Recovery) chip | Supported |
Transmitter Type | EML Laser |
Tx Wave Bandwidth | 1304.5- 1317.5 nm |
Average Launch Power (Min) Each Lane | -2.4 dBm |
Average Launch Power (Max) Each Lane | 4 dBm |
Extinction Ratio (Min) | 5 dB |
Receiver Type | PIN photodiode |
RX Wave Bandwidth | 1304.5- 1317.5 nm |
Average Receiver Sensitivity (Min) Each Lane | -5.4 dBm |
Average Receiver Sensitivity (Max) Each Lane | 4 dBm |
Receiver Overload | 6.5 dBm |
Temperature Range | Standard 0°-70°C |
Storage Temperature | -40° to 85°C |
Relative Humidity | 5 to 85% |
Power Consumption (Max) | 4.5 W |
Power | +3.3V single power supply |
Compliance | CE, RoHS, Class 1 FDA and IEC60825-1 Laser Safety Compliant, IEEE 802.3cd, 100GBASE-DR, 100G Lambda MSA, QSFP28 MSA, SFF-8636 (Management Interface for 4-lane modules), SFF-8665 |
Huawei compatible QSFP28-100G-DR Datasheet
v2Complete technical specifications and product details
Huawei compatible QSFP28-100G-DR Description
EdgeOptic's QSFP28-100G-DR compatible is a Huawei-coded version of the EdgeOptic 100G-QSFP28-SL500 multi-vendor 100GBASE-DR transceiver. It matches the Huawei QSFP28-100G-DR (material number 02312VSP), a single-lambda 100G PAM4 QSFP28 module that runs over duplex single-mode fiber with a double LC/UPC connector.
The module uses an EML laser transmitter in the 1310 nm band (1304.5 to 1317.5 nm) and a PIN photodiode receiver. It carries a 3 dB optical budget, which covers the 500 m 100GBASE-DR reach over single-mode fiber. Line rate is 106.25 Gbps. RS(544,514) KP4 forward error correction runs inside the module DSP, so the host port does not need a separate FEC setting. DOM/DDM diagnostics report live operating conditions. The module operates across the standard 0 to 70°C range and draws up to 4.5W.
Huawei documents the QSFP28-100G-DR on the S5700, S6700, and S12700 series and on the CloudEngine 5800, 6800, 7800, 8800, 12800, and 16800 series. Confirm the exact switch model, line card, and software version against Huawei's compatibility matrix before deployment. It is CE and RoHS certified and built to IEEE 802.3cd 100GBASE-DR, 100G Lambda MSA, QSFP28 MSA, and SFF-8665. EdgeOptic codes the EEPROM so the module is recognized as a Huawei part.
Backed by 15+ years of EdgeOptic compatibility engineering across vendor optical platforms. Made to order with a 2-week lead time and a lifetime warranty. For volume orders or coding questions, contact our sales team.
Frequently Asked Questions
Does installing the QSFP28-100G-DR on a Huawei switch require disabling port FEC?
Yes. Huawei hardware documentation states that RS-FEC must be disabled on the port before a QSFP28-100G-DR module is installed. The module runs its own KP4 FEC inside the DSP, and if the port has RS-FEC enabled the link goes Down with a transceiver type mismatch. Verify the port FEC configuration before installation regardless of module source.
Will a third-party QSFP28-100G-DR trigger non-certified alarm messages on Huawei switches?
EdgeOptic codes the module with Huawei-recognized EEPROM, and any residual non-certified-module alarm depends on the switch model and software version. Huawei documents commands to suppress the alarm: transceiver phony-alarm-disable in the system view on S-series switches, and transceiver non-certified-alarm disable on CloudEngine. These are documented Huawei behaviors rather than required EdgeOptic steps, so confirm the command against the documentation for the specific switch model and software version.