Infinera SFP+ Tunable TRX100117/TC Compatible Module
Infinera compatible TRX100117/TC - Key Features
- Compatibility: Infinera
- Media Type: Single-Mode Fiber (SMF)
- Fiber Count: Duplex
- Connector: Double LC/UPC
- Maximum Distance: 80 km
- Guaranteed Link Budget: 23 dB
- Tx Wavelenght: DWDM 89 Ch (C-band 50Ghz)
- Supported Data Rate: 1.25 Gbps - 11.32 Gbps
- DDM/DOM: Supported
- Temperature Range: Standard 0°-70°C
Infinera TRX100117/TC Price
SKU:DWDM-10G-SFP-80-TUN-IF
Made to Order - 2 WeeksInfinera compatible TRX100117/TC Specifications
Form Factor | SFP+ |
Media Type | Single-Mode Fiber (SMF) |
Fiber Count | Duplex |
Connector | Double LC/UPC |
Maximum Distance | 80 km |
Guaranteed Link Budget | 23 dB |
TX Wavelength | Channel 17-61 (DWDM C-Band 50 GHz, 89 channels) |
RX Wavelength | Channel 17-61 (DWDM, C-Band 50 GHz) |
Supported Data Rate | 1.25 Gbps - 11.32 Gbps |
Supportet Ethernet Applications | 10G Ethernet (10.31Gbps) |
Supported Fiber Channel Applications | 10G Fiber Channel (10.52 Gbps), 8G Fiber Channel (8.5 Gbps) |
Optical Transport Network (OTN) Applications | ODU2 (10.037Gbps), ODU2e (10.399Gbps), OTU1e (11.049Gbps), OTU1f (11.27Gbps), OTU2 (10.70Gbps), OTU2e (11.095Gbps), OTU2f (11.32Gbps) |
SDH/SONET Standards | STM-64 (9.95Gbps) |
DDM/DOM | Supported |
Tx Wavelength Bandwidth | ITU 50Ghz Grid: C-Band (Ch17-61) |
Rx Wavelength Bandwidth | 1260 - 1620 nm |
Minimum Transmitting Power | -1 dBm |
Maximum Transmitting Power | 4 dBm |
Receiver Sensitivity | -23 dBm |
Receiver Overload | -6 dBm |
Dispersion | 1600 ps/nm |
Transmitter Type | Monolithic MZM Tunable TOSA |
Receiver Type | APD Photodiode |
Temperature Range | Standard 0°-70°C |
Power | +3.3V single power supply |
Compliance | CE,Class 1 FDA and IEC60825-1 Laser Safety Compliant,RoHS,SFF-8431,SFP MSA |
Infinera compatible TRX100117/TC Datasheet
v4Complete technical specifications and product details
Infinera compatible TRX100117/TC Description
The EdgeOptic TRX100117/TC is an Infinera-compatible (ex. Transmode) tunable 10G DWDM SFP+ transceiver based on the DWDM-10G-SFP-80-TUN platform, manufactured to SFP+ MSA (SFF-8431) specifications. The module operates over duplex single-mode fiber with a rated 23 dB optical link budget, reaching up to 80 km. The 80 km distance assumes minimum optical budget and average fiber attenuation; actual reach depends on installed plant loss, connectors, and splices. The TRX100117/TC uses a tunable laser transmitter operating across ITU C-Band channels on the 50 GHz DWDM grid and an APD receiver. A single tunable SKU replaces any of the fixed-wavelength DWDM channel variants. This reduces spare inventory to one part number. DDM/DOM optical diagnostics report transmit power, receive power, temperature, bias current, and supply voltage via the MSA-compatible EEPROM interface.
The module has a duplex LC/UPC connector and operates within a 0–70 °C commercial temperature range. The chipset supports data rates from 8.5 to 11.32 Gbps, including 10G Ethernet (10.31 Gbps), STM-64 (9.95 Gbps), 10G Fibre Channel (10.52 Gbps), 8G Fibre Channel (8.5 Gbps), OTU2 (10.71 Gbps), and OTU2e (11.09 Gbps). Supported applications depend on the host port capabilities and are confirmed during the ordering process. Typical deployments include metro network backbones, regional carrier interconnects, inter-city data center interconnects, and service provider distribution networks over 80 km single-mode fiber. The multi-rate capability supports mixed-speed network environments where legacy SDH/SONET and 10G Ethernet coexist on the same DWDM infrastructure.
The EdgeOptic TRX100117/TC is CE/RoHS certified and compliant with Class 1 laser safety standards (IEC 60825-1). The module EEPROM is programmed with Infinera/Transmode-recognized vendor coding and tested against Infinera optical transport platforms. The TRX100117/TC SKU originates from the Transmode product line, which was acquired by Infinera and incorporated into the Infinera portfolio. EdgeOptic compatible modules coded for this SKU are accepted on Infinera and legacy Transmode platforms that support the TRX100117/TC part number. Each module undergoes optical parameter measurements, connector endface cleanliness inspection, and EEPROM data validation before shipment to confirm correct vendor-specific encoding and compliance with MSA specifications.
Frequently Asked Questions
Does the TRX100117/TC work on both Infinera and legacy Transmode platforms?
Yes. The TRX100117/TC SKU originates from the Transmode product line. Infinera acquired Transmode in 2015 and incorporated the product portfolio. The EdgeOptic TRX100117/TC is coded with the original Transmode vendor EEPROM identity and is accepted on both legacy Transmode optical transport systems and current Infinera platforms that recognize the TRX100117/TC part number.
How is the wavelength configured on the TRX100117/TC in Infinera platforms?
On Infinera and legacy Transmode optical transport platforms, the wavelength is typically configured through the platform's element management system or CLI. If the host platform does not support tunable wavelength provisioning commands for this module, the TRX100117/TC can be pre-programmed to the required ITU channel using an external SFP wavelength tuning device before insertion. The configured channel is stored in non-volatile memory and persists through power cycles.