Standard recommended retail price without VAT.
€157.66
Standard recommended retail price without VAT.
Because of our comprehensive Testing Program, we are confident on quality of our products. Such approach empower us to cover all our products with:
Media Type: | Single-Mode Fiber (SMF) |
---|---|
Connectors: | Double LC |
TX Wavelength: | 1310 nm |
RX Wavelength: | 1310 nm. |
Minimum Optical Budget: | 3 dB |
Maximum Distance: | 500m |
Supported Data Rate: | 106.25 Gbps |
Supported Applications: | 100G Ethernet (103.125Gbps) |
DDM/DOM: | Supported |
CDR (Clock and Data Recovery) chip | Supported |
Forward Error Correction (FEC): | Host FEC Supported |
Transmitter Type: | EML TOSA |
Tx Wavelength Bandwidth: | 1304.5- 1317.5 nm |
Average Launch Power (Min) Each Lane: | -2.4 dBm |
Average Launch Power (Max) Each Lane: | 4 dBm |
Extinction Ratio (Min): | 5 dB |
Receiver Type: | PIN ROSA |
Rx Wavelength Bandwidth: | 1304.5- 1317.5 nm |
Average Receiver Sensitivity (Min) Each Lane: | -5.4 dBm |
Average Receiver Sensitivity (Max) Each Lane: | 4 dBm |
Receiver Overload: | 6.5 dBm |
Temperature Range: | Standard 0°-70°C |
Storage Temperature: | -40° to 85°C |
Relative Humidity: | 0 to 85% |
Power Consumption: | ≤4.5W |
Power: | +3.3V |
Chipset: | Macom, Sumitomo, Samtech, Oclaro, Avago, II-IV |
Compliance: | 100G Lambda MSA, Class 1 FDA, IEC60825-1 Laser Safety Compliant, IEEE802.3cd 100GBASE-DR, RoHS-6, CE, QSFP28 MSA, SFF-8636, SFF-8665 |
Transceiver Type: | QSFP28 |
Juniper Compatible QSFP28-100G-DR QSFP28 Module is based on our product 100G-QSFP28-SL500. When You will order it will be encoded with Juniper code and it will be labeled with part number: 100G-QSFP28-SL500-JU, where JU means Juniper Compatible. Above You can download data-sheet of our 100G-QSFP28-SL500 product.
QSFP-100G-DR (740-088322) is Juniper Compatible 100G-DR Single Lambda PAM4 QSFP28 (Quad Small Form-Factor Pluggable 28) Transceiver, operating over pair of single-mode optical fiber. On the transmission side module converts 4x 25G NRZ (Non-return-to-zero) electrical input channels (each 25.78125Gbps) into 1 Single Lambda 100G PAM4 optical signal using PAM4 modulation with baud rate of 53.125 Gbps. Reversely the opposite is done on the receiving side, module converts 1 Single Lambda 100G PAM4 optical signal into 4x 25G NRZ (Non-return-to-zero) electrical inputs using PAM4 modulation with baud rate of 53.125 Gbps. Module has minimum guaranteed optical budget of 3 dB, which in most cases is enough to reach 500 m distance using single-mode cable. However, distance is just indicative parameter calculated for comfort of identification. Eventually we calculate distance taking in account minimal optical budget and average attenuation of optical cabling in industry. QSFP-100G-DR (740-088322) uses EML TOSA (which operates over 1304.5- 1317.5 nm range) laser transmitters and PIN ROSA receivers. Module support DDM/DOM optical diagnostics, which provide diagnostic information about the present operating conditions. Additionally module supports FEC (Forward Error Correction) function which will help receiving side detect and correct bit errors and improve the overall quality of the link. QSFP-100G-DR (740-088322) operates in Standard 0°-70°C temperature range and has double LC connectors. 100G-DR Single Lambda PAM4 QSFP28 support up to 106.25 Gbps data rate and such applications as 100G Ethernet (103.125 Gbps). QSFP-100G-DR (740-088322) optical transceiver is multi-purpose module used in number of different places in today’s networking environment. Most popular applications are Internet Service Provider (ISP), Mobile Operator and Data Center Core Networks. QSFP-100G-DR (740-088322) as a Single Lambda PAM4 module can interoperate with 400G transceivers that comply with IEEE 400GBASE-DR4, via fiber break-out cables.
QSFP-100G-DR (740-088322) Juniper compatible Transceiver is based on our 100G-QSFP28-SL500 product, which is fully compliant with QSFP28 Multi Source Agreement (MSA) SFF-8665, IEEE802.3cd 100GBASE-DR and 100G Lambda MSA standards, product safety standards and is CE/RoHS certified. We perform compatibility tests for QSFP-100G-DR (740-088322) Juniper compatible Transceiver with the most recent Juniper networking equipment platforms, allowing us to encode transceiver EEPROM memory to be compatible with and work seamlessly with Juniper platforms! Because we are committed to providing high-quality service, we conduct rigorous quality checks before delivering our products. As a result, we perform optical parameter measurements, connector cleanness tests, and EEPROM memory data validation tests on our products. Feel free to Contact us – We will gladly learn about your needs and provide you with the best alternative of QSFP-100G-DR!