JNP-QSFP-100G-SR4 Juniper Compatible 100GBASE-SR4 QSFP28 Transceiver
Juniper compatible JNP-QSFP-100G-SR4 - Key Features
- Compatibility: Juniper
- Media Type: 4 Lanes of Multi-Mode Fiber (MMF)
- Connector: MTP/MPO-12 (UPC)
- Fiber Count: 8 Fibers
- Maximum Distance: 100 m
- Average Link Budget: 1.9 dB
- Tx Wavelength: 850 nm
- Supported Data Rate: 103.125 Gbps
- DDM/DOM: Supported
- Forward Error Correction (FEC): No
- Temperature Range: Standard 0°-70°C
Juniper JNP-QSFP-100G-SR4 Price
In Stock - Ships Next Business DayJuniper compatible JNP-QSFP-100G-SR4 Specifications
Form Factor | QSFP28 |
Modulation | NRZ (Non-Return to Zero) |
Media Type | 4 Lanes of Multi-Mode Fiber (MMF) |
Connector | MTP/MPO-12 (UPC) |
Fiber Count | 8 Fibers |
Maximum Distance | 100 m |
Average Link Budget | 1.9 dB |
TX Wavelength | 850 nm |
RX Wavelength | 4-channel 850 nm |
Supported Data Rate | 103.125 Gbps |
Supported Ethernet Applications | 100G Ethernet (103.125 Gbps) |
DDM/DOM | Supported |
Forward Error Correction (FEC) | No |
Transmitter Type | VSCEL Laser |
Tx Wave Bandwidth | 20 nm (840-860 nm) |
Average Launch Power (Min) Each Lane | 3 dBm |
Average Launch Power (Max) Each Lane | 7.5 dBm |
Extinction Ratio (Min) | 3 dB |
Receiver Type | PIN photodiode |
RX Wave Bandwidth | 20 nm (840-860 nm) |
Average Receiver Sensitivity (Min) Each Lane | -10.3 dBm |
Average Receiver Sensitivity (Max) Each Lane | 2.4 dBm |
Receiver Overload | 3.4 dBm |
Temperature Range | Standard 0°-70°C |
Storage Temperature | -40° to 85°C |
Relative Humidity | 5 to 85% |
Power Consumption (Max) | 3.5 W |
Power | +3.3V single power supply |
Compliance | CE, RoHS, Class 1 FDA and IEC60825-1 Laser Safety Compliant, IEEE 802.3bm, 100GBASE-SR4, QSFP28 MSA, SFF-8636 (Management Interface for 4-lane modules), SFF-8665 |
Juniper compatible JNP-QSFP-100G-SR4 Datasheet
v3Complete technical specifications and product details
Juniper compatible JNP-QSFP-100G-SR4 Description
EdgeOptic's JNP-QSFP-100G-SR4 compatible is a Juniper-coded version of the EdgeOptic 100G-QSFP28-100 multi-vendor 100GBASE-SR4 transceiver, one universal short-reach QSFP28 module coded for multiple vendor codes. Juniper lists the OEM assembly number 740-061405 for this part. It runs 100G Ethernet over four parallel 850 nm VCSEL lanes at 25G each across multimode fiber, terminated on an MTP/MPO-12 (UPC) connector using 8 active fibers, 4 transmit and 4 receive. The transceiver port is female (unpinned); the patch cable is the pinned male side, so a transceiver-to-transceiver link uses a male-to-male Type B cable. Reach is 70 m over OM3 and 100 m over OM4, per IEEE 802.3bm Clause 95.
Optical specifications include a 1.9 dB average link budget, receiver sensitivity of −10.3 dBm per lane, NRZ modulation, and no FEC at the optical PMD level. The transmitter uses 850 nm VCSEL lasers; the receiver is a PIN photodiode. OM4 supports the full 100 m while OM3 is rated to 70 m, with achievable distance depending on patch panels, splices, and connector cleanliness in the installed link. DDM/DOM is supported, so the host can read live per-lane optical power and bias along with module temperature and voltage. The module operates across the 0°C to 70°C commercial temperature range at 3.5 W and complies with the QSFP28 MSA, SFF-8636, and SFF-8665. This is a 100G Ethernet short-reach optic; it does not carry Fibre Channel, OTN, or SONET traffic.
EdgeOptic codes this compatible with Juniper-recognized EEPROM, so it presents as a known optic to the host. It works on Juniper QFX and EX series switches with 100G QSFP28 ports; verify the specific switch model and Junos release against the Juniper compatibility matrix before deployment. Typical roles include data center core interconnects, ISP aggregation, and mobile operator core networks.
Backed by 15+ years of EdgeOptic compatibility engineering across vendor optical platforms. Ships next business day from EU stock with a lifetime warranty. For project pricing or technical consultation, contact our sales team.
Frequently Asked Questions
Is Juniper part number 740-061405 the same as JNP-QSFP-100G-SR4?
Yes. Juniper's Hardware Compatibility Tool lists 740-061405 as the OEM assembly number for the JNP-QSFP-100G-SR4 optic. They identify the same 100GBASE-SR4 QSFP28 module, and the EdgeOptic compatible covers either ordering code. Engineers searching by the 740-061405 assembly number will receive the same part as those ordering by the JNP-QSFP-100G-SR4 SKU.