CFP2-DCO-T-WDM-HG

CFP2-DCO-T-WDM-HG (740-087314) is Juniper compatible dual rate (100G/200G) Coherent CFP2 (C (centum) Form Factor Pluggable 2) Transceiver designed for operation over Double Fiber optical cable. On the transmission side, the module converts 25.78Gbps (CAUI-4) or 27.95Gbps (OTL4.4) electrical input channels into one Single Lambda 100G/200G optical signal. Reversely the opposite is done on the receiving side, the module converts one Single Lambda 100G/200G optical signal into 25.78Gbps (CAUI-4) or 27.95Gbps (OTL4.4) electrical input signal. CFP2-DCO-T-WDM-HG (740-087314) has a minimum guaranteed optical budget of 18.5 dB, which in most cases is enough to reach 80km without signal amplification, however the module can reach up to 2000km (100G) or 1000km (200G) with signal amplification. Distance is just an indicative parameter for comfort of identification that is calculated by taking into account minimal optical budget and average attenuation of optical cabling in industry. To achieve high data rate, long haul error-free transmission Soft Decision FEC (Forward Error Correction) with 25% overhead has been implemented on this unit. Juniper compatible CFP2-DCO-T-WDM-HG (740-087314) has advanced DSP (Digital Signal Processor) ASIC and integrated Coherent Transmitter/Receiver which helps to revolutionize the IP routing edge giving it ability to transport IP over DWDM Network (IPoDWDM). Juniper CFP2 DCO Compatible module Transmitter and Receivers support PM-DQPSK (polarization-multiplexed differential quadrature phase shift keying) / PM-QPSK (polarization-multiplexed quadrature phase shift keying) modulation for 100G and PM-16QAM (Polarization multiplexed 16-ary quadrature amplitude modulation) for 200G. Juniper compatible CFP2-DCO-T-WDM-HG (740-087314) uses tunable DWDM Coherent laser transmitter (ITU-T 50Ghz C-Band 96 Channels) and tunable DWDM Coherent (ITU-T 50Ghz C-Band 96 Channels) receiver. Juniper CFP2 DCO supports DDM/DOM optical diagnostics that provide real-time diagnostic information about the present operating conditions and additionally the module has built-in Line & Client PRBS (pseudorandom binary sequence) generator and checker which can help to diagnose and test the link state. 200G CFP2-DCO operates in Standard -5° to 70°C temperature range and has Double LC connector facing Line side and 104-pin CFP2 MSA-compliant connector towards Host side. Juniper compatible CFP2-DCO-T-WDM-HG (740-087314) supports 112.2 to 210.4 Gbps data rate and is designed for Telecom Metro/Long-haul, Wireless Backhaul and Hyperscale Data Center Interconnect (DCI) applications.

To ensure compatibility we have tested our compatible version of Juniper CFP2-DCO-T-WDM-HG (740-087314) Transceiver in latest platforms of Juniper networking equipment, which allows us to encode transceiver EEPROM memory to be compatible and work seamlessly with Juniper platforms. Transceivers is also CE/RoHS certified, compliant with product safety standards and to CFP2 MSA Hardware Specification 1.0 with modifications, CFP MSA Management Interface Specification 2.6 r06a with modifications, OIF-CFP2-DCO, CEI-28G-MR specifications and OTL4.4/OTLC2 Signaling. Feel free to Contact us – We will gladly learn about your needs and provide you with the best solution!