JNP-SFP-10G-BX10D Juniper Compatible 10G BiDi SFP+ 10km, Tx1330/Rx1270
Juniper compatible JNP-SFP-10G-BX10D - Key Features
- Compatibility: Juniper
- Media Type: Single-Mode Fiber (SMF)
- Fiber Count: BiDi
- Connector: Single LC/UPC
- Maximum Distance: 20 km
- Average Link Budget: 9 dB
- Tx Wavelength: 1330 nm
- Supported Data Rate: 1.25 Gbps - 11.32 Gbps
- DDM/DOM: Supported
- Temperature Range: Standard 0°-70°C
Juniper JNP-SFP-10G-BX10D Price
In Stock - Ships Next Business DayJuniper compatible JNP-SFP-10G-BX10D Specifications
Form Factor | SFP+ |
Media Type | Single-Mode Fiber (SMF) |
Fiber Count | BiDi |
Connector | Single LC/UPC |
Maximum Distance | 20 km |
Average Link Budget | 9 dB |
TX Wavelength | 1330 nm |
RX Wavelength | 1270 nm |
Supported Data Rate | 1.25 Gbps - 11.32 Gbps |
Supported Ethernet Applications | 10G Ethernet (10.31Gbps), Gigabit Ethernet (1.25 Gbps) |
Supported Fiber Channel Applications | 10G Fiber Channel (10.52 Gbps), 1G Fiber Channel (1.0625 Gbps), 2G Fiber Channel (2.125 Gbps), 4G Fiber Channel (4.25 Gbps), 8G Fiber Channel (8.5 Gbps) |
SDH/SONET Standards | STM-64 (9.95Gbps) |
DDM/DOM | Supported |
Tx Wavelength Bandwidth | 40 nm (1310-1350 nm) |
Rx Wavelength Bandwidth | 40 nm (1250-1290 nm) |
Minimum Transmitting Power | -5 dBm |
Maximum Transmitting Power | 0 dBm |
Receiver Sensitivity | -14.5 dBm |
Receiver Overload | 4 dBm |
Dispersion | 140-160 ps/nm |
Transmitter Type | DFB Laser |
Receiver Type | PIN photodiode |
Temperature Range | Standard 0°-70°C |
Power | +3.3V single power supply |
Compliance | CE,Class 1 FDA and IEC60825-1 Laser Safety Compliant,RoHS,SFF-8431,SFP MSA |
Juniper compatible JNP-SFP-10G-BX10D Datasheet
v3Complete technical specifications and product details
Juniper compatible JNP-SFP-10G-BX10D Description
EdgeOptic's JNP-SFP-10G-BX10D compatible is a Juniper-coded Tx1330/Rx1270 version of the EdgeOptic BIDI-10G-SFP-20B multi-vendor 10G BiDi SFP+ transceiver. Juniper also lists this part under the orderable number 740-066990. The module carries Juniper-recognized identification data, so Junos platforms with 10G SFP+ ports read it as a matching part. The BX10D designation marks the downstream B-side of a bidirectional pair, Tx 1330 nm and Rx 1270 nm over a single strand of single-mode fiber.
Juniper rates the original JNP-SFP-10G-BX10D for up to 10 km. The EdgeOptic compatible runs the BIDI-10G-SFP-20B platform with a 9 dB link budget rated for spans up to 20 km, which makes it a direct drop-in for any 10 km Juniper deployment. The extra budget covers connector loss, splice loss, and fiber aging on the span. RX overload of +4 dBm exceeds 0 dBm maximum transmit power, so a short fiber run between two of these modules will not saturate the receiver.
Juniper documents this part without digital optical monitoring. The EdgeOptic compatible adds DOM per SFF-8472, so Junos can read live temperature, supply voltage, laser bias current, and optical power on the same port. The optical interface uses a DFB laser transmitter and a PIN photodiode receiver. Transmit power runs from −5 dBm to 0 dBm, receiver sensitivity is better than −14.5 dBm. The module uses a single LC/UPC connector, runs on a +3.3 V supply across a 0 to 70 C operating range, and complies with the SFP MSA and SFF-8431.
The BX10D pairs with an upstream A-side module at the remote end: transmit at 1270 nm, receive at 1330 nm. Both endpoints must carry opposite wavelength directions for the link to come up. The module handles 10 Gigabit Ethernet and Gigabit Ethernet traffic across Juniper platforms with 10G SFP+ ports. For deployment on a specific chassis, verify the part against the Juniper Hardware Compatibility Tool, or contact our sales team.
Backed by 15+ years of EdgeOptic compatibility engineering across vendor optical platforms, the JNP-SFP-10G-BX10D compatible ships next business day from EU stock with a lifetime warranty.
Frequently Asked Questions
The Juniper JNP-SFP-10G-BX10D is rated 10 km without DOM. What does the EdgeOptic compatible change?
Two things. First, the Juniper Hardware Compatibility Tool lists JNP-SFP-10G-BX10D with Digital Optical Monitoring marked as not available. The EdgeOptic compatible supports DOM per SFF-8472, so Junos can read live temperature, supply voltage, laser bias current, transmit power, and receive power on that port. Second, the EdgeOptic part runs the BIDI-10G-SFP-20B platform with a 9 dB link budget rated for spans up to 20 km. The same 10 km Juniper application gains headroom for connector loss, splice loss, and fiber aging, and the +4 dBm RX overload exceeds the 0 dBm maximum transmit power so a short fiber run will not saturate the receiver. The part is a valid drop-in replacement for the 10 km Juniper original.
What pairs with a JNP-SFP-10G-BX10D at the remote end?
An upstream A-side module that transmits at 1270 nm and receives at 1330 nm. Within the Juniper catalog the matching part is JNP-SFP-10G-BX10U. Two BX10D modules at both ends of a fiber link transmit on the same wavelength and the link will not come up. Confirm Uplink and Downlink directions are paired correctly before commissioning.