Juniper QDD-2X100G-CWDM4 (740-077808) Compatible QSFP28-DD
Juniper compatible QDD-2X100G-CWDM4 - Key Features
- Compatibility: Juniper
- Media Type: Single-Mode Fiber (SMF)
- Connector: 2 x CS Duplex
- Fiber Count: Duplex
- Maximum Distance: 2 km
- Guaranteed Link Budget: 5 dB
- Tx Wavelenght: CWDM 8 Ch
- Supported Data Rate: 206.25 Gbps
- DDM/DOM: Supported
- Forward Error Correction (FEC): Host FEC Supported
- Temperature Range: Standard 0°-70°C
Juniper QDD-2X100G-CWDM4 Price
SKU:2x100G-QDD-2.1-JU
Made to Order - 2 WeeksJuniper compatible QDD-2X100G-CWDM4 Specifications
Form Factor | QSFP-DD |
Modulation | NRZ (Non-Return to Zero) |
Media Type | Single-Mode Fiber (SMF) |
Connector | 2 x CS Duplex |
Fiber Count | Duplex |
Maximum Distance | 2 km |
Guaranteed Link Budget | 5 dB |
TX Wavelenght | 2 x 4-channel CWDM (1271/1291/1311/1331 nm) |
RX Wavelenght | 2 x 4-channel CWDM (1271/1291/1311/1331 nm) |
Supported Data Rate | 206.25 Gbps |
Supportet Ethernet Applications | 2x100G Ethernet (206.25 Gbps) |
DDM/DOM | Supported |
Forward Error Correction (FEC) | Host FEC Supported |
CDR (Clock and Data Recovery) chip | Supported |
Transmitter Type | DFB Laser |
Tx Wave Bandwidth | 2x4 CWDM Lanes (73 nm 1264.50 – 1337.50nm) (L0 Tx center 1271nm, L1 Tx center 1291nm, L2 Tx center 1311nm, L3 Tx center 1331nm) |
Average Launch Power (Min) Each Lane | -6.5 dBm |
Average Launch Power (Max) Each Lane | 2.5 dBm |
Extinction Ratio (Min) | 3.5 dB |
Receiver Type | PIN photodiode |
RX Wave Bandwidth | 2x4 CWDM Lanes (73 nm 1264.50 – 1337.50nm) (L0 Tx center 1271nm, L1 Tx center 1291nm, L2 Tx center 1311nm, L3 Tx center 1331nm) |
Average Receiver Sensitivity (Min) Each Lane | -11.5 dBm |
Average Receiver Sensitivity (Max) Each Lane | 2.5 dBm |
Receiver Overload | 3.5 dBm |
Temperature Range | Standard 0°-70°C |
Storage Temperature | -40° to 85°C |
Relative Humidity | 5 to 85% |
Power Consumption (Max) | 7 W |
Power | +3.3V single power supply |
Compliance | 100G CLR4 Alliance, 100G CWDM4 MSA, CE, CMIS V4.0, QSFP-DD MSA, RoHS, SFF-8665 |
Juniper compatible QDD-2X100G-CWDM4 Datasheet
v2Complete technical specifications and product details
Juniper compatible QDD-2X100G-CWDM4 Description
QDD-2X100G-CWDM4 (740-077808) is Cisco Compatible 2x100G CWDM4 QSFP28-DD (Quad Small Form-Factor Pluggable Double Density) Transceiver designed for operation over single-mode optical fiber. 2x100G CWDM4 has a QSFP-DD form factor which supports eight electrical interface lanes which can operate in 25G NRZ encoding mode resulting in 200G (8x25G) data rate. Technically 2x100GBASE-CWDM4 QSFP28-DD modules consists of two 100G transceivers in one housing which can provide great flexibility for operators in their migration path towards QSFP-DD gear and 400G PAM4 infrastructure and help to make necessary interconnections with high density legacy 100GBASE-SR4 QSFP28 interfaces which use NRZ encoding. Module has a minimum guaranteed optical budget of 5 dB, which in most cases is enough to reach 2 km over OS2 single mode optical fiber. However, distance is just an indicative parameter calculated for comfort of identification. Eventually we calculate distance taking in account minimal optical budget and average attenuation of optical cabling in industry. 2x100G CWDM4 uses 8x25Gb/s Uncooled DFB (1271/1291/1311/1331nm) laser transmitters and 8x25Gb/s PIN Photo Detectors. 2x100GBASE-CWDM4 QSFP28-DD module supports DDM/DOM optical diagnostics, which provide diagnostic information about the present operating conditions. QDD-2X100G-CWDM4 (740-077808) operates in standard 0°-70°C temperature range and has a double duplex CS connector. CS connectors have been standardized by CS Consortium and require special CS patch cables. 2x100GBASE-CWDM4 QSFP-DD supports 2×103.125 Gbps data rate and such applications as 2x100G Ethernet (206.25 Gbps). QDD-2X100G-CWDM4 (740-077808) optical transceiver is a multi-purpose module which can be used in various scenarios in today’s networking environment. Most popular applications are Telecom Metro, Telecom Core, Wireless Backhaul and Data Center Interconnect (DCI).
To ensure compatibility we have tested our compatible version of Juniper QDD-2X100G-CWDM4 (740-077808) Transceiver in latest platforms of Juniper networking equipment, which allows us to encode transceiver EEPROM memory to be compatible and work seamlessly with Juniper platforms. Transceivers is also CE/RoHS certified, compliant with product safety standards and is fully compliant to to QSFP-DD Multi Source Agreement (MSA) and CWDM4 MSA standard. Feel free to Contact us - We will gladly learn about your needs and provide you with the best solution!