Juniper QDD-400G-LR4-10 / 740-096176 Compatible QSFP-DD Transceiver

EdgeOptic's QDD-400G-LR4-10 compatible is a Juniper-coded version of the EdgeOptic 400G-QSFP-DD-11 multi-vendor 400GBASE-LR4 QSFP-DD transceiver. It carries the optical parameters of the Juniper original and is built to the same QSFP-DD MSA mechanical and electrical envelope, so it drops into Juniper QSFP-DD ports as a direct replacement for the OEM module.

The module carries four-channel CWDM optics on 1271, 1291, 1311 and 1331 nm, with an EML transmitter per lane and a PIN photodiode array on the receive side. Signaling is PAM4 at a 425 Gbps aggregate line rate, delivering 400G Ethernet over a duplex LC/UPC interface on standard single-mode fiber. The link supports a 7.1 dB average optical link budget, which covers reaches up to 10 km over OS2 fiber. Average launch power per lane runs from −2.8 dBm to +4 dBm, and receiver sensitivity is rated at −9.1 dBm per lane. Distance is an indicative figure derived from the average link budget and typical fiber attenuation, so verify the loss on the installed span during commissioning.

The 400GbE electrical and rate envelope is defined by IEEE 802.3bs, while the LR4 optical interface follows the 100G Lambda MSA 400G-LR4-10 specification. The host system supplies RS(544,514) KP4 forward error correction, and the module includes clock and data recovery on both the host and line sides. Digital diagnostic monitoring reports temperature, supply voltage, laser bias, transmit power and receive power per lane, and the module is managed over CMIS V4.0. It operates across a 0 to 70 degrees C case temperature range and draws up to 9 W. The 400G-QSFP-DD-11 platform is a 400GbE-only module: it does not carry Fibre Channel, OTN or SONET traffic, and it is a native duplex-LC module rather than a breakout type.

EdgeOptic codes this compatible with Juniper-recognized EEPROM so it is read correctly on Juniper platforms with QSFP-DD ports. The Juniper orderable part number for this module is 740-096176; engineers often see this FRU number in inventory and hardware configurations while the product itself is referenced as QDD-400G-LR4-10. The module is CE and RoHS certified, rated Class 1 laser per IEC 60825-1, and compliant with the QSFP-DD MSA. It suits internet service provider aggregation and backbone links, mobile operator core networks and data center core interconnect.

Backed by 15+ years of EdgeOptic compatibility engineering across vendor optical platforms, this module is made to order on a 2-week lead time and ships with a lifetime warranty. For coding queries or platform-specific deployment questions, contact our sales team.