QSFP-100G-4WDM40-I Juniper Compatible Industrial 100GBASE-4WDM-40 QSFP28 40km Transceiver
Juniper compatible QSFP-100G-4WDM40-I - Key Features
- Compatibility: Juniper
- Media Type: Single-Mode Fiber (SMF)
- Connector: Double LC/UPC
- Fiber Count: Duplex
- Maximum Distance: 40 km
- Average Link Budget: 22 dB
- Tx Wavelength: 1310 nm
- Supported Data Rate: 112 Gbps
- DDM/DOM: Supported
- Forward Error Correction (FEC): Host FEC Supported
- Temperature Range: Standard 0°-70°C
Juniper QSFP-100G-4WDM40-I Price
In Stock - Ships Next Business DayJuniper compatible QSFP-100G-4WDM40-I Specifications
Form Factor | QSFP28 |
Modulation | NRZ (Non-Return to Zero) |
Media Type | Single-Mode Fiber (SMF) |
Connector | Double LC/UPC |
Fiber Count | Duplex |
Maximum Distance | 40 km |
Average Link Budget | 22 dB |
TX Wavelength | 4-channel LAN WDM (1295.56/1300.05/1304.58/1309.14 nm) |
RX Wavelength | 4-channel LAN WDM (1295.56/1300.05/1304.58/1309.14 nm) |
Supported Data Rate | 112 Gbps |
Supported Ethernet Applications | 100G Ethernet (103.125 Gbps) |
Supported Fiber Channel Applications | 4x 32G Fiber Channel (112.2Gbps) |
Optical Transport Network (OTN) Applications | OTU4 (112 Gbps) |
DDM/DOM | Supported |
Forward Error Correction (FEC) | Host FEC Supported |
Transmitter Type | EML Laser |
Tx Wave Bandwidth | 4 LAN WDM Seperated 1310 nm Lanes (15.66 nm 1294.53 – 1310.19nm) (L0 Tx center 1295.56nm, L1 Tx center 1300.05nm, L2 Tx center 1304.58nm, L3 Tx center 1309.14nm) |
Average Launch Power (Min) Each Lane | -2 dBm |
Average Launch Power (Max) Each Lane | 4 dBm |
Extinction Ratio (Min) | 4 dB |
Receiver Type | APD Photodiode |
RX Wave Bandwidth | 4 LAN WDM Seperated 1310 nm Lanes (15.66 nm 1294.53 – 1310.19nm) (L0 Tx center 1295.56nm, L1 Tx center 1300.05nm, L2 Tx center 1304.58nm, L3 Tx center 1309.14nm) |
Average Receiver Sensitivity (Min) Each Lane | -21 dBm |
Average Receiver Sensitivity (Max) Each Lane | -18 dBm |
Receiver Overload | -1 dBm |
Temperature Range | Standard 0°-70°C |
Storage Temperature | -40° to 85°C |
Relative Humidity | 5 to 85% |
Power Consumption (Max) | 4.5 W |
Power | +3.3V single power supply |
Compliance | CE, RoHS, Class 1 FDA and IEC60825-1 Laser Safety Compliant, IEEE 802.3ba, IEEE 802.3bm, 100GBASE-ER4 Lite, 128GFC Gen 6, OTN OTU4, QSFP28 MSA, SFF-8636 (Management Interface for 4-lane modules), SFF-8665 |
Juniper compatible QSFP-100G-4WDM40-I Datasheet
v2Complete technical specifications and product details
Juniper compatible QSFP-100G-4WDM40-I Description
EdgeOptic's QSFP-100G-4WDM40-I compatible is a Juniper-coded industrial-temperature 100GBASE-4WDM-40 QSFP28 transceiver built to the 4WDM-40 MSA. It mirrors Juniper OEM part QSFP-100G-4WDM40-I (740-092597), the iTemp variant of the standard QSFP-100G-4WDM40 with an extended -40 to +85 C operating range for hardened-environment routing and access deployments.
Optical layer matches the commercial 4WDM-40 SKU. Four LAN-WDM channels at 1295.56, 1300.05, 1304.58, and 1309.14 nm carry 25.78125 Gb/s NRZ each. Cooled EML transmitters land between -2 dBm and +4 dBm per lane; APD receivers reach -21 dBm sensitivity with -1 dBm overload. Optical link budget is 22 dB with host RS-FEC engaged for the full 40 km reach, or 18 dB without FEC. Host-side RS-FEC is required for the 40 km application.
Protocol scope is 100GE only. The 4WDM-40 MSA defines a 100GBASE application with KR4 FEC and does not extend to OTU4 or Fibre Channel rates. Use this module for 100GBASE-4WDM-40 ports only; OTU4 transponder applications are served by separate SKUs on the broader 100G-QSFP28-40 platform.
Supported Juniper platforms for the -I variant are narrower than the commercial QSFP-100G-4WDM40. The Juniper HCT lists 9 supported platforms, with current Junos coverage on ACX7332, ACX7348, MX304, MX10004, PTX10008, and PTX10002-36QDD; ACX710, ACX7024 and ACX7024X are also referenced for earlier Junos branches. Do not assume the 65-platform list of the commercial variant applies; verify the line-card and Junos release entry against the Juniper HCT before ordering this iTemp SKU.
EEPROM is coded for Juniper recognition, so Junos brings the module up with no override command and no unsupported-transceiver flag. DOM is supported through the standard QSFP28 SFF-8636 page map. Form factor is QSFP28 duplex LC PC/UPC; module power 4.5 W maximum; industrial operating temperature -40 to +85 C.
Backed by 15+ years of EdgeOptic compatibility engineering across vendor optical platforms. Ships next business day from EU stock with a lifetime warranty included. For Juniper iTemp platform validation against your Junos release, contact our sales team.
Frequently Asked Questions
Which Juniper platforms support QSFP-100G-4WDM40-I, and how does the list differ from the commercial QSFP-100G-4WDM40?
The Juniper HCT lists 9 supported platforms for QSFP-100G-4WDM40-I, versus 65 for the commercial QSFP-100G-4WDM40. Current Junos coverage is on ACX7332, ACX7348, MX304, MX10004, PTX10008, and PTX10002-36QDD. ACX710, ACX7024 and ACX7024X appear on earlier Junos branches. The MX series outside MX304/MX10004 and the QFX switching range are not listed for the iTemp variant. Confirm the specific line-card or port-cage entry against the Juniper HCT before ordering, especially when an environment requires the -40 to +85 C operating range.