Juniper QSFP-100G-SR4-T2 Compatible 100GBASE-SR4 QSFP28 Transceiver

Juniper
QSFP28
100G
8 Fibers
100 m
Juniper QSFP-100G-SR4-T2 Compatible QSFP28

Juniper compatible QSFP-100G-SR4-T2 - Key Features

  • Compatibility: Juniper
  • Media Type: 4 Lanes of Multi-Mode Fiber (MMF)
  • Connector: MTP/MPO-12 (UPC)
  • Fiber Count: 8 Fibers
  • Maximum Distance: 100 m
  • Average Link Budget: 1.9 dB
  • Tx Wavelength: 850 nm
  • Supported Data Rate: 103.125 Gbps
  • DDM/DOM: Supported
  • Forward Error Correction (FEC): No
  • Temperature Range: Standard 0°-70°C

Juniper QSFP-100G-SR4-T2 Price

Lead timeIn Stock - Ships Next Business Day
Standard recommended retail price ex VAT:
34.75
Choice of 0+
Telecoms & Integrators Globally

Juniper compatible QSFP-100G-SR4-T2 Specifications

Form Factor
QSFP28
Modulation
NRZ (Non-Return to Zero)
Media Type
4 Lanes of Multi-Mode Fiber (MMF)
Connector
MTP/MPO-12 (UPC)
Fiber Count
8 Fibers
Maximum Distance
100 m
Average Link Budget
1.9 dB
TX Wavelength
850 nm
RX Wavelength
4-channel 850 nm
Supported Data Rate
103.125 Gbps
Supported Ethernet Applications
100G Ethernet (103.125 Gbps)
DDM/DOM
Supported
Forward Error Correction (FEC)
No
Transmitter Type
VSCEL Laser
Tx Wave Bandwidth
20 nm (840-860 nm)
Average Launch Power (Min) Each Lane
3 dBm
Average Launch Power (Max) Each Lane
7.5 dBm
Extinction Ratio (Min)
3 dB
Receiver Type
PIN photodiode
RX Wave Bandwidth
20 nm (840-860 nm)
Average Receiver Sensitivity (Min) Each Lane
-10.3 dBm
Average Receiver Sensitivity (Max) Each Lane
2.4 dBm
Receiver Overload
3.4 dBm
Temperature Range
Standard 0°-70°C
Storage Temperature
-40° to 85°C
Relative Humidity
5 to 85%
Power Consumption (Max)
3.5 W
Power
+3.3V single power supply
Compliance
CE, RoHS, Class 1 FDA and IEC60825-1 Laser Safety Compliant, IEEE 802.3bm, 100GBASE-SR4, QSFP28 MSA, SFF-8636 (Management Interface for 4-lane modules), SFF-8665

Juniper compatible QSFP-100G-SR4-T2 Datasheet

v3

Complete technical specifications and product details

Updated:Jan 16, 2026Format:PDF

Juniper compatible QSFP-100G-SR4-T2 Description

EdgeOptic's QSFP-100G-SR4-T2 compatible is a Juniper-coded 100GBASE-SR4 version of the EdgeOptic 100G-QSFP28-100 multi-vendor 100GBASE-SR4 transceiver, one universal short-reach module coded for a range of switch and router vendors. It runs 100G Ethernet over four parallel 850 nm VCSEL lanes at 25G each across multimode fiber, terminated on an MTP/MPO-12 (UPC) connector using 8 active fibers, 4 transmit and 4 receive. The transceiver port is female (unpinned); the patch cable is the pinned male side, so transceiver-to-transceiver runs need a male-to-male Type B MPO assembly. Reach is 70 m over OM3 and 100 m over OM4, per IEEE 802.3bm Clause 95.

Optical specifications include a 1.9 dB average link budget, receiver sensitivity of −10.3 dBm per lane, NRZ modulation, and no FEC at this reach. The transmitter uses 850 nm VCSEL lasers; the receiver is a PIN photodiode. OM4 supports the full 100 m while OM3 is rated to 70 m, with achievable distance depending on patch panels, splices, and connector cleanliness in the installed link. DDM/DOM is supported per SFF-8636, so the host can read per-lane transmit power, receive power, and bias along with module-level temperature and voltage. The module operates across the 0°C to 70°C commercial range, draws up to 3.5 W within the QSFP28 envelope, and is compliant with the QSFP28 MSA and SFF-8665. This is an Ethernet-only 100G short-reach optic; it does not carry Fibre Channel, OTN, or SONET traffic.

Juniper lists QSFP-100G-SR4-T2 under part number 740-061405 in the Hardware Compatibility Tool, with QSFP-100G-SR4-C noted as a Common Optic Equivalent. EdgeOptic codes this compatible with Juniper-recognized EEPROM so the host reads it as a supported transceiver. It works across the Juniper switching and routing platform family; confirm the specific platform against the Juniper Hardware Compatibility Tool before deployment, since the 100G QSFP28 port can be split to four 25GBASE-SR channels on hosts that support breakout. Typical roles include data center core interconnects and provider edge aggregation.

Backed by 15+ years of EdgeOptic compatibility engineering across vendor optical platforms. Ships next business day from EU stock with a lifetime warranty. For project pricing or technical consultation, contact our sales team.

Frequently Asked Questions

How does QSFP-100G-SR4-T2 differ from JNP-QSFP-100G-SR4 and QSFP-100G-SR4-C on Juniper platforms?

All three are 100GBASE-SR4 QSFP28 entries in the Juniper Hardware Compatibility Tool. QSFP-100G-SR4-T2 and JNP-QSFP-100G-SR4 both map to Juniper part number 740-061405, and the HCT lists QSFP-100G-SR4-C as a Common Optic Equivalent, so they serve the same short-reach function. Match the exact SKU form on your order sheet to the EdgeOptic page for that form, and verify the target platform in the Juniper HCT.